Re: [PATCH 15/17] phy: qcom-qmp-ufs: consolidate lane config

[Neil Armstrong]

On 20/09/2022 09:38, Johan Hovold wrote:
> For legacy reasons, there are two configuration parameters that describe
> the number of lanes a PHY has.
>
> Replace them both with a new field simply named "lanes".
>
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 31 ++++++++-----------------
>   1 file changed, 10 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index ca9a42250556..d21b977850b3 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -533,8 +533,7 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
>   
>   /* struct qmp_phy_cfg - per-PHY initialization config */
>   struct qmp_phy_cfg {
> -	/* number of lanes provided by phy */
> -	int nlanes;
> +	int lanes;
>   
>   	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
>   	const struct qmp_phy_init_tbl *serdes_tbl;
> @@ -561,9 +560,6 @@ struct qmp_phy_cfg {
>   	/* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
>   	unsigned int phy_status;
>   
> -	/* true, if PHY has secondary tx/rx lanes to be configured */
> -	bool is_dual_lane_phy;
> -
>   	/* true, if PCS block has no separate SW_RESET register */
>   	bool no_pcs_sw_reset;
>   };
> @@ -662,7 +658,7 @@ static const char * const qmp_phy_vreg_l[] = {
>   };
>   
>   static const struct qmp_phy_cfg msm8996_ufs_cfg = {
> -	.nlanes			= 1,
> +	.lanes			= 1,
>   
>   	.serdes_tbl		= msm8996_ufs_serdes_tbl,
>   	.serdes_tbl_num		= ARRAY_SIZE(msm8996_ufs_serdes_tbl),
> @@ -687,7 +683,7 @@ static const struct qmp_phy_cfg msm8996_ufs_cfg = {
>   };
>   
>   static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> -	.nlanes			= 2,
> +	.lanes			= 2,
>   
>   	.serdes_tbl		= sdm845_ufsphy_serdes_tbl,
>   	.serdes_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
> @@ -707,12 +703,11 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
>   	.pwrdn_ctrl		= SW_PWRDN,
>   	.phy_status		= PHYSTATUS,
>   
> -	.is_dual_lane_phy	= true,
>   	.no_pcs_sw_reset	= true,
>   };
>   
>   static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
> -	.nlanes			= 1,
> +	.lanes			= 1,
>   
>   	.serdes_tbl		= sm6115_ufsphy_serdes_tbl,
>   	.serdes_tbl_num		= ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
> @@ -735,7 +730,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
>   };
>   
>   static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
> -	.nlanes			= 2,
> +	.lanes			= 2,
>   
>   	.serdes_tbl		= sm8150_ufsphy_serdes_tbl,
>   	.serdes_tbl_num		= ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
> @@ -754,12 +749,10 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
>   	.start_ctrl		= SERDES_START,
>   	.pwrdn_ctrl		= SW_PWRDN,
>   	.phy_status		= PHYSTATUS,
> -
> -	.is_dual_lane_phy	= true,
>   };
>   
>   static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
> -	.nlanes			= 2,
> +	.lanes			= 2,
>   
>   	.serdes_tbl		= sm8350_ufsphy_serdes_tbl,
>   	.serdes_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> @@ -778,12 +771,10 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
>   	.start_ctrl		= SERDES_START,
>   	.pwrdn_ctrl		= SW_PWRDN,
>   	.phy_status		= PHYSTATUS,
> -
> -	.is_dual_lane_phy	= true,
>   };
>   
>   static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
> -	.nlanes			= 2,
> +	.lanes			= 2,
>   
>   	.serdes_tbl		= sm8350_ufsphy_serdes_tbl,
>   	.serdes_tbl_num		= ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
> @@ -802,8 +793,6 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
>   	.start_ctrl		= SERDES_START,
>   	.pwrdn_ctrl		= SW_PWRDN,
>   	.phy_status		= PHYSTATUS,
> -
> -	.is_dual_lane_phy	= true,
>   };
>   
>   static void qmp_ufs_configure_lane(void __iomem *base,
> @@ -956,14 +945,14 @@ static int qmp_ufs_power_on(struct phy *phy)
>   	/* Tx, Rx, and PCS configurations */
>   	qmp_ufs_configure_lane(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 1);
>   
> -	if (cfg->is_dual_lane_phy) {
> +	if (cfg->lanes >= 2) {
>   		qmp_ufs_configure_lane(qphy->tx2, cfg->regs,
>   					cfg->tx_tbl, cfg->tx_tbl_num, 2);
>   	}
>   
>   	qmp_ufs_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1);
>   
> -	if (cfg->is_dual_lane_phy) {
> +	if (cfg->lanes >= 2) {
>   		qmp_ufs_configure_lane(qphy->rx2, cfg->regs,
>   					cfg->rx_tbl, cfg->rx_tbl_num, 2);
>   	}
> @@ -1122,7 +1111,7 @@ static int qmp_ufs_create(struct device *dev, struct device_node *np, int id,
>   	if (IS_ERR(qphy->pcs))
>   		return PTR_ERR(qphy->pcs);
>   
> -	if (cfg->is_dual_lane_phy) {
> +	if (cfg->lanes >= 2) {
>   		qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
>   		if (IS_ERR(qphy->tx2))
>   			return PTR_ERR(qphy->tx2);

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>