[PATCH v2 3/3] serial: 8250: Switch UART port flags to using BIT_ULL

[Maciej W. Rozycki]

Use BIT_ULL rather than encoding bits explicitly where applicable with 
UART port flags.  This makes a (__force upf_t) cast redundant, but keep 
it for visual consistency with the flags defined in terms of userspace 
macros.

Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxx>
---
New change in v2.
---
 include/linux/serial_core.h |   28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

linux-serial-8250-upf-bit-ull.diff
Index: linux-macro/include/linux/serial_core.h
===================================================================
--- linux-macro.orig/include/linux/serial_core.h
+++ linux-macro/include/linux/serial_core.h
@@ -505,24 +505,24 @@ struct uart_port {
 #define UPF_BUGGY_UART		((__force upf_t) ASYNC_BUGGY_UART     /* 14 */ )
 #define UPF_MAGIC_MULTIPLIER	((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
 
-#define UPF_NO_THRE_TEST	((__force upf_t) (1 << 19))
+#define UPF_NO_THRE_TEST	((__force upf_t) BIT_ULL(19))
 /* Port has hardware-assisted h/w flow control */
-#define UPF_AUTO_CTS		((__force upf_t) (1 << 20))
-#define UPF_AUTO_RTS		((__force upf_t) (1 << 21))
+#define UPF_AUTO_CTS		((__force upf_t) BIT_ULL(20))
+#define UPF_AUTO_RTS		((__force upf_t) BIT_ULL(21))
 #define UPF_HARD_FLOW		((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS))
 /* Port has hardware-assisted s/w flow control */
-#define UPF_SOFT_FLOW		((__force upf_t) (1 << 22))
-#define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
-#define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
-#define UPF_EXAR_EFR		((__force upf_t) (1 << 25))
-#define UPF_BUG_THRE		((__force upf_t) (1 << 26))
+#define UPF_SOFT_FLOW		((__force upf_t) BIT_ULL(22))
+#define UPF_CONS_FLOW		((__force upf_t) BIT_ULL(23))
+#define UPF_SHARE_IRQ		((__force upf_t) BIT_ULL(24))
+#define UPF_EXAR_EFR		((__force upf_t) BIT_ULL(25))
+#define UPF_BUG_THRE		((__force upf_t) BIT_ULL(26))
 /* The exact UART type is known and should not be probed.  */
-#define UPF_FIXED_TYPE		((__force upf_t) (1 << 27))
-#define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
-#define UPF_FIXED_PORT		((__force upf_t) (1 << 29))
-#define UPF_DEAD		((__force upf_t) (1 << 30))
-#define UPF_IOREMAP		((__force upf_t) (1 << 31))
-#define UPF_FULL_PROBE		((__force upf_t) (1ULL << 32))
+#define UPF_FIXED_TYPE		((__force upf_t) BIT_ULL(27))
+#define UPF_BOOT_AUTOCONF	((__force upf_t) BIT_ULL(28))
+#define UPF_FIXED_PORT		((__force upf_t) BIT_ULL(29))
+#define UPF_DEAD		((__force upf_t) BIT_ULL(30))
+#define UPF_IOREMAP		((__force upf_t) BIT_ULL(31))
+#define UPF_FULL_PROBE		((__force upf_t) BIT_ULL(32))
 
 #define __UPF_CHANGE_MASK	0x17fff
 #define UPF_CHANGE_MASK		((__force upf_t) __UPF_CHANGE_MASK)