Re: [PATCH v2 2/3] dt-bindings: thermal: Convert loongson2 to json-schema

[Krzysztof Kozlowski]

On 21/09/2022 03:56, Yinbo Zhu wrote:
> Convert the loongson2 thermal binding to DT schema format using
> json-schema.

Incorrect subject and incorrect commit msg. There is no conversion here.

> 
> Signed-off-by: Yinbo Zhu <c>
> ---
> Change in v2:
> 		1. Add description and type about the "id".	
> 		2. Make the filename was based on compatible.
> 
>  .../bindings/thermal/loongson2-thermal.yaml   | 52 +++++++++++++++++++
>  1 file changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/loongson2-thermal.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/loongson2-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson2-thermal.yaml
> new file mode 100644
> index 000000000000..2994ae3a56aa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/loongson2-thermal.yaml


No improvements here. You ignore my comments, so I am going to NAK it.


> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/loongson2-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Thermal sensors on loongson2 SoCs
> +
> +maintainers:
> +  - zhanghongchen <zhanghongchen@xxxxxxxxxxx>
> +  - Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: loongson,loongson2-thermal
> +
> +  reg:
> +    maxItems: 1
> +
> +  id:
> +    $ref: '//schemas/types.yaml#/definitions/uint32'

No improvements here, so let me be specific - you need to really justify
such property or it cannot go to schema.

> +    description: |
> +      Specify the thermal sensor id.
> +    minimum: 0
> +    maximum: 3
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  "#thermal-sensor-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - id
> +  - interrupt-parent

Why?

> +  - interrupts
> +  - '#thermal-sensor-cells'

Use the same style of quote: ' or ".

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    thermal: thermal@1fe01500 {

How other similar nodes are named (in other DTS files)?



Best regards,
Krzysztof