[PATCH v4 21/30] thermal/drivers/st: Use generic trip points

From: Daniel Lezcano
Date: Wed Sep 21 2022 - 05:45:48 EST


The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert to the generic trip points

Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/thermal/st/st_thermal.c | 47 +++++----------------------------
1 file changed, 7 insertions(+), 40 deletions(-)

diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
index 1276b95604fe..c0d45cdd1c2f 100644
--- a/drivers/thermal/st/st_thermal.c
+++ b/drivers/thermal/st/st_thermal.c
@@ -134,48 +134,12 @@ static int st_thermal_get_temp(struct thermal_zone_device *th, int *temperature)
return 0;
}

-static int st_thermal_get_trip_type(struct thermal_zone_device *th,
- int trip, enum thermal_trip_type *type)
-{
- struct st_thermal_sensor *sensor = th->devdata;
- struct device *dev = sensor->dev;
-
- switch (trip) {
- case 0:
- *type = THERMAL_TRIP_CRITICAL;
- break;
- default:
- dev_err(dev, "invalid trip point\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
- int trip, int *temp)
-{
- struct st_thermal_sensor *sensor = th->devdata;
- struct device *dev = sensor->dev;
-
- switch (trip) {
- case 0:
- *temp = mcelsius(sensor->cdata->crit_temp);
- break;
- default:
- dev_err(dev, "Invalid trip point\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
static struct thermal_zone_device_ops st_tz_ops = {
.get_temp = st_thermal_get_temp,
- .get_trip_type = st_thermal_get_trip_type,
- .get_trip_temp = st_thermal_get_trip_temp,
};

+static struct thermal_trip trip;
+
int st_thermal_register(struct platform_device *pdev,
const struct of_device_id *st_thermal_of_match)
{
@@ -238,9 +202,12 @@ int st_thermal_register(struct platform_device *pdev,

polling_delay = sensor->ops->register_enable_irq ? 0 : 1000;

+ trip.temperature = sensor->cdata->crit_temp;
+ trip.type = THERMAL_TRIP_CRITICAL;
+
sensor->thermal_dev =
- thermal_zone_device_register(dev_name(dev), 1, 0, sensor,
- &st_tz_ops, NULL, 0, polling_delay);
+ thermal_zone_device_register_with_trips(dev_name(dev), &trip, 1, 0, sensor,
+ &st_tz_ops, NULL, 0, polling_delay);
if (IS_ERR(sensor->thermal_dev)) {
dev_err(dev, "failed to register thermal zone device\n");
ret = PTR_ERR(sensor->thermal_dev);
--
2.34.1