[PATCH v2 6/6] tty: serial: 8250: add DFL bus driver for Altera 16550.
From: matthew . gerlach
Date: Fri Sep 23 2022 - 08:23:12 EST
From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
Add a Device Feature List (DFL) bus driver for the Altera
16550 implementation of UART.
Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
Reported-by: kernel test robot <lkp@xxxxxxxxx>
---
v2: clean up error messages
alphabetize header files
fix 'missing prototype' error by making function static
tried to sort Makefile and Kconfig better
---
drivers/tty/serial/8250/8250_dfl.c | 177 +++++++++++++++++++++++++++++
drivers/tty/serial/8250/Kconfig | 9 ++
drivers/tty/serial/8250/Makefile | 1 +
include/linux/dfl.h | 7 ++
4 files changed, 194 insertions(+)
create mode 100644 drivers/tty/serial/8250/8250_dfl.c
diff --git a/drivers/tty/serial/8250/8250_dfl.c b/drivers/tty/serial/8250/8250_dfl.c
new file mode 100644
index 000000000000..539ca6138eda
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_dfl.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for FPGA UART
+ *
+ * Copyright (C) 2022 Intel Corporation, Inc.
+ *
+ * Authors:
+ * Ananda Ravuri <ananda.ravuri@xxxxxxxxx>
+ * Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/dfl.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+struct dfl_uart {
+ void __iomem *csr_base;
+ struct device *dev;
+ u64 uart_clk;
+ u64 fifo_len;
+ unsigned int fifo_size;
+ unsigned int reg_shift;
+ unsigned int line;
+};
+
+static int feature_uart_walk(struct dfl_uart *dfluart, resource_size_t max)
+{
+ void __iomem *param_base;
+ int off;
+ u64 v;
+
+ v = readq(dfluart->csr_base + DFHv1_CSR_SIZE_GRP);
+
+ if (!FIELD_GET(DFHv1_CSR_SIZE_GRP_HAS_PARAMS, v)) {
+ dev_err(dfluart->dev, "missing required DFH parameters\n");
+ return -EINVAL;
+ }
+
+ param_base = dfluart->csr_base + DFHv1_PARAM_HDR;
+
+ off = dfl_find_param(param_base, max, DFHv1_PARAM_ID_CLK_FRQ);
+ if (off < 0) {
+ dev_err(dfluart->dev, "missing CLK_FRQ param\n");
+ return -EINVAL;
+ }
+
+ dfluart->uart_clk = readq(param_base + off + DFHv1_PARAM_DATA);
+ dev_dbg(dfluart->dev, "UART_CLK_ID %llu Hz\n", dfluart->uart_clk);
+
+ off = dfl_find_param(param_base, max, DFHv1_PARAM_ID_FIFO_LEN);
+ if (off < 0) {
+ dev_err(dfluart->dev, "missing FIFO_LEN param\n");
+ return -EINVAL;
+ }
+
+ dfluart->fifo_len = readq(param_base + off + DFHv1_PARAM_DATA);
+ dev_dbg(dfluart->dev, "UART_FIFO_ID fifo_len %llu\n", dfluart->fifo_len);
+
+ off = dfl_find_param(param_base, max, DFHv1_PARAM_ID_REG_LAYOUT);
+ if (off < 0) {
+ dev_err(dfluart->dev, "missing REG_LAYOUT param\n");
+ return -EINVAL;
+ }
+
+ v = readq(param_base + off + DFHv1_PARAM_DATA);
+ dfluart->fifo_size = FIELD_GET(DFHv1_PARAM_ID_REG_WIDTH, v);
+ dfluart->reg_shift = FIELD_GET(DFHv1_PARAM_ID_REG_SHIFT, v);
+ dev_dbg(dfluart->dev, "UART_LAYOUT_ID width %d shift %d\n",
+ dfluart->fifo_size, dfluart->reg_shift);
+
+ return 0;
+}
+
+static int dfl_uart_probe(struct dfl_device *dfl_dev)
+{
+ struct device *dev = &dfl_dev->dev;
+ struct uart_8250_port uart;
+ struct dfl_uart *dfluart;
+ int ret;
+
+ memset(&uart, 0, sizeof(uart));
+
+ dfluart = devm_kzalloc(dev, sizeof(*dfluart), GFP_KERNEL);
+ if (!dfluart)
+ return -ENOMEM;
+
+ dfluart->dev = dev;
+
+ dfluart->csr_base = devm_ioremap_resource(dev, &dfl_dev->mmio_res);
+ if (IS_ERR(dfluart->csr_base)) {
+ return PTR_ERR(dfluart->csr_base);
+ }
+
+ ret = feature_uart_walk(dfluart, resource_size(&dfl_dev->mmio_res));
+
+ devm_iounmap(dev, dfluart->csr_base);
+ devm_release_mem_region(dev, dfl_dev->mmio_res.start, resource_size(&dfl_dev->mmio_res));
+
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed uart feature walk\n");
+
+ dev_dbg(dev, "nr_irqs %d %p\n", dfl_dev->num_irqs, dfl_dev->irqs);
+
+ if (dfl_dev->num_irqs == 1)
+ uart.port.irq = dfl_dev->irqs[0];
+
+ switch (dfluart->fifo_len) {
+ case 32:
+ uart.port.type = PORT_ALTR_16550_F32;
+ break;
+
+ case 64:
+ uart.port.type = PORT_ALTR_16550_F64;
+ break;
+
+ case 128:
+ uart.port.type = PORT_ALTR_16550_F128;
+ break;
+
+ default:
+ dev_err(dev, "bad fifo_len %llu\n", dfluart->fifo_len);
+ return -EINVAL;
+ }
+
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.mapbase = dfl_dev->csr_start;
+ uart.port.mapsize = dfl_dev->csr_size;
+ uart.port.regshift = dfluart->reg_shift;
+ uart.port.uartclk = dfluart->uart_clk;
+ uart.port.flags |= UPF_IOREMAP;
+
+ /* register the port */
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0) {
+ dev_err(dev, "unable to register 8250 port %d.\n", ret);
+ return -EINVAL;
+ }
+ dev_info(dev, "serial8250_register_8250_port %d\n", ret);
+ dfluart->line = ret;
+ dev_set_drvdata(dev, dfluart);
+
+ return 0;
+}
+
+static void dfl_uart_remove(struct dfl_device *dfl_dev)
+{
+ struct dfl_uart *dfluart = dev_get_drvdata(&dfl_dev->dev);
+
+ if (dfluart->line > 0)
+ serial8250_unregister_port(dfluart->line);
+}
+
+#define FME_FEATURE_ID_UART 0x24
+
+static const struct dfl_device_id dfl_uart_ids[] = {
+ { FME_ID, FME_FEATURE_ID_UART },
+ { }
+};
+MODULE_DEVICE_TABLE(dfl, dfl_uart_ids);
+
+static struct dfl_driver dfl_uart_driver = {
+ .drv = {
+ .name = "dfl-uart",
+ },
+ .id_table = dfl_uart_ids,
+ .probe = dfl_uart_probe,
+ .remove = dfl_uart_remove,
+};
+module_dfl_driver(dfl_uart_driver);
+
+MODULE_DESCRIPTION("DFL Intel UART driver");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index d0b49e15fbf5..5c6497ce5c12 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -361,6 +361,15 @@ config SERIAL_8250_BCM2835AUX
If unsure, say N.
+config SERIAL_8250_DFL
+ tristate "DFL bus driver for Altera 16550 UART"
+ depends on SERIAL_8250 && FPGA_DFL
+ help
+ This option enables support for a Device Feature List (DFL) bus
+ driver for the Altera 16650 UART. One or more Altera 16650 UARTs
+ can be instantiated in a FPGA and then be discovered during
+ enumeration of the DFL bus.
+
config SERIAL_8250_FSL
bool "Freescale 16550 UART support" if COMPILE_TEST && !(PPC || ARM || ARM64)
depends on SERIAL_8250_CONSOLE
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index bee908f99ea0..32006e0982d1 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
+obj-$(CONFIG_SERIAL_8250_DFL) += 8250_dfl.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
diff --git a/include/linux/dfl.h b/include/linux/dfl.h
index 7d74ef8d1d20..a17aeccc501e 100644
--- a/include/linux/dfl.h
+++ b/include/linux/dfl.h
@@ -67,6 +67,13 @@
#define DFHv1_PARAM_MSIX_STARTV 0x8
#define DFHv1_PARAM_MSIX_NUMV 0xc
+#define DFHv1_PARAM_ID_CLK_FRQ 0x2
+#define DFHv1_PARAM_ID_FIFO_LEN 0x3
+
+#define DFHv1_PARAM_ID_REG_LAYOUT 0x4
+#define DFHv1_PARAM_ID_REG_WIDTH GENMASK_ULL(63, 32)
+#define DFHv1_PARAM_ID_REG_SHIFT GENMASK_ULL(31, 0)
+
/**
* enum dfl_id_type - define the DFL FIU types
*/
--
2.25.1