Re: [PATCH v3 4/4] media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
From: Sakari Ailus
Date: Fri Sep 23 2022 - 08:49:47 EST
Hi Marco,
Thanks for the update. A few small things below.
On Thu, Sep 22, 2022 at 03:48:43PM +0200, Marco Felsch wrote:
...
> +static int tc358746_apply_misc_config(struct tc358746 *tc358746)
> +{
> + const struct v4l2_mbus_framefmt *mbusfmt;
> + struct v4l2_subdev *sd = &tc358746->sd;
> + struct v4l2_subdev_state *sink_state;
> + const struct tc358746_format *fmt;
> + struct device *dev = sd->dev;
> + u32 val;
> + int err;
> +
> + sink_state = v4l2_subdev_lock_and_get_active_state(sd);
> + mbusfmt = v4l2_subdev_get_pad_format(sd, sink_state, TC358746_SINK);
> + v4l2_subdev_unlock_state(sink_state);
> +
> + fmt = tc358746_get_format_by_code(TC358746_SINK, mbusfmt->code);
You can no longer access mbusfmt here as you've already unlocked subdev
state.
> +
> + /* Self defined CSI user data type id's are not supported yet */
> + val = PDFMT(fmt->pdformat);
> + dev_dbg(dev, "DATAFMT: 0x%x\n", val);
> + err = tc358746_write(tc358746, DATAFMT_REG, val);
> + if (err)
> + return err;
> +
> + val = PDATAF(fmt->pdataf);
> + dev_dbg(dev, "CONFCTL[PDATAF]: 0x%x\n", fmt->pdataf);
> + err = tc358746_update_bits(tc358746, CONFCTL_REG, PDATAF_MASK, val);
> + if (err)
> + return err;
> +
> + val = tc358746->vb_size / 32;
> + dev_dbg(dev, "FIFOCTL: %u (0x%x)\n", val, val);
> + err = tc358746_write(tc358746, FIFOCTL_REG, val);
> + if (err)
> + return err;
> +
> + /* Total number of bytes for each line/width */
> + val = mbusfmt->width * fmt->bpp / 8;
> + dev_dbg(dev, "WORDCNT: %u (0x%x)\n", val, val);
> + return tc358746_write(tc358746, WORDCNT_REG, val);
> +}
...
> +static int tc358746_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct tc358746 *tc358746 = to_tc358746(sd);
> + struct v4l2_subdev *src;
> + int err;
> +
> + dev_dbg(sd->dev, "%sable\n", enable ? "en" : "dis");
> +
> + src = tc358746_get_remote_sd(&tc358746->pads[TC358746_SINK]);
> + if (!src)
> + return -EPIPE;
> +
> + if (enable) {
> + err = pm_runtime_resume_and_get(sd->dev);
> + if (err)
> + return err;
> +
> + err = tc358746_apply_dphy_config(tc358746);
> + if (err)
> + goto err_out;
> +
> + err = tc358746_apply_misc_config(tc358746);
> + if (err)
> + goto err_out;
> +
> + err = tc358746_enable_csi_lanes(tc358746, 1);
> + if (err)
> + goto err_out;
> +
> + err = tc358746_enable_csi_module(tc358746, 1);
> + if (err)
> + goto err_out;
> +
> + err = tc358746_enable_parallel_port(tc358746, 1);
> + if (err)
> + goto err_out;
> +
> + err = v4l2_subdev_call(src, video, s_stream, 1);
> + if (err)
> + goto err_out;
> +
> + return err;
This can be return 0.
> +
> +err_out:
> + pm_runtime_mark_last_busy(sd->dev);
> + pm_runtime_put_sync_autosuspend(sd->dev);
> +
> + return err;
> + }
--
Kind regards,
Sakari Ailus