Re: [PATCH v3 1/2] dt-binding: pinctrl: Add NPCM8XX pinctrl and GPIO documentation

[Krzysztof Kozlowski]

On 21/09/2022 11:50, Tomer Maimon wrote:
> Added device tree binding documentation for Nuvoton Arbel BMC NPCM8XX
> pinmux and GPIO controller.
> 
> Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> ---
>  .../pinctrl/nuvoton,npcm845-pinctrl.yaml      | 213 ++++++++++++++++++
>  1 file changed, 213 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> new file mode 100644
> index 000000000000..2e8bc9b22166
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> @@ -0,0 +1,213 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton NPCM845 Pin Controller and GPIO
> +
> +maintainers:
> +  - Tomer Maimon <tmaimon77@xxxxxxxxx>
> +
> +description:
> +  The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through
> +  the multiplexing block, Each pin supports GPIO functionality (GPIOx)
> +  and multiple functions that directly connect the pin to different
> +  hardware blocks.
> +
> +properties:
> +  compatible:
> +    const: nuvoton,npcm845-pinctrl
> +
> +  ranges:
> +    maxItems: 1
> +
> +  '#address-cells':

Use consistent quotes - either ' or "

> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
> +  nuvoton,sysgcr:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: a phandle to access GCR registers.
> +
> +patternProperties:
> +  "^gpio@":
> +    type: object
> +
> +    description:
> +      Eight GPIO banks that each contain 32 GPIOs.
> +
> +    properties:
> +      gpio-controller: true
> +
> +      '#gpio-cells':
> +        const: 2
> +
> +      reg:
> +        maxItems: 1
> +
> +      interrupts:
> +        maxItems: 1
> +
> +      gpio-ranges:
> +        maxItems: 1
> +
> +    required:
> +      - gpio-controller
> +      - '#gpio-cells'
> +      - reg
> +      - interrupts
> +      - gpio-ranges
> +
> +  "-mux":
> +    $ref: pinmux-node.yaml#
> +
> +    properties:
> +      groups:
> +        description:
> +          One or more groups of pins to mux to a certain function
> +        items:
> +          enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
> +                  smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b,
> +                  smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
> +                  smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1,
> +                  spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2,
> +                  bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen,
> +                  rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4,
> +                  fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11,
> +                  fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3,
> +                  r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1,
> +                  rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5,
> +                  smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9,
> +                  smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8,
> +                  pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout,
> +                  serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1,
> +                  spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b,
> +                  smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12,
> +                  smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3,
> +                  hgpio4, hgpio5, hgpio6, hgpio7 ]
> +
> +      function:
> +        description:
> +          The function that a group of pins is muxed to
> +        enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
> +                smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b,
> +                smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
> +                smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1,
> +                spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2,
> +                bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen,
> +                rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4,
> +                fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11,
> +                fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3,
> +                r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1,
> +                rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5,
> +                smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9,
> +                smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8,
> +                pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout,
> +                serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1,
> +                spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b,
> +                smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12,
> +                smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3,
> +                hgpio4, hgpio5, hgpio6, hgpio7 ]
> +
> +    dependencies:
> +      groups: [ function ]
> +      function: [ groups ]
> +
> +    additionalProperties: false
> +
> +  "^pin":
> +    $ref: pincfg-node.yaml#
> +
> +    properties:
> +      pins:
> +        description:
> +          A list of pins to configure in certain ways, such as enabling
> +          debouncing
> +
> +      bias-disable: true
> +
> +      bias-pull-up: true
> +
> +      bias-pull-down: true
> +
> +      input-enable: true
> +
> +      output-low: true
> +
> +      output-high: true
> +
> +      drive-push-pull: true
> +
> +      drive-open-drain: true
> +
> +      input-debounce:
> +        description:
> +          Debouncing periods in microseconds, one period per interrupt
> +          bank found in the controller
> +        $ref: /schemas/types.yaml#/definitions/uint32-array
> +        minItems: 1
> +        maxItems: 4
> +
> +      slew-rate:
> +        description: |
> +          0: Low rate
> +          1: High rate
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        enum: [0, 1]
> +
> +      drive-strength:
> +        enum: [ 0, 1, 2, 4, 8, 12 ]
> +
> +    additionalProperties: false
> +
> +allOf:
> +  - $ref: "pinctrl.yaml#"

Drop quotes.

> +
> +required:
> +  - compatible
> +  - ranges
> +  - '#address-cells'
> +  - '#size-cells'
> +  - nuvoton,sysgcr

I don't think this solves any questions...


> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      pinctrl: pinctrl@f0800000 {

gcr has @f0800000, hasn't it?

> +        compatible = "nuvoton,npcm845-pinctrl";
> +        ranges = <0x0 0x0 0xf0010000 0x8000>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        nuvoton,sysgcr = <&gcr>;
> +
> +        gpio0: gpio@f0010000 {
> +          gpio-controller;
> +          #gpio-cells = <2>;
> +          reg = <0x0 0xB0>;
> +          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> +          gpio-ranges = <&pinctrl 0 0 32>;
> +        };
> +
> +        fanin0_pin: fanin0-mux {
> +          groups = "fanin0";
> +          function = "fanin0";
> +        };
> +
> +        pin34_slew: pin34-slew {
> +          pins = "GPIO34/I3C4_SDA";
> +          bias-disable;
> +        };
> +      };
> +    };
> +

Best regards,
Krzysztof