Re: [PATCH v2 net-next 12/14] dt-bindings: net: dsa: ocelot: add ocelot-ext documentation

[Colin Foster]

On Fri, Sep 23, 2022 at 08:08:53PM +0200, Krzysztof Kozlowski wrote:
> On 22/09/2022 06:01, Colin Foster wrote:
> > diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
> > index 8d93ed9c172c..bed575236261 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
> > @@ -54,9 +54,21 @@ description: |
> >        - phy-mode = "1000base-x": on ports 0, 1, 2, 3
> >        - phy-mode = "2500base-x": on ports 0, 1, 2, 3
> >  
> > +  VSC7412 (Ocelot-Ext):
> > +
> > +    The Ocelot family consists of four devices, the VSC7511, VSC7512, VSC7513,
> > +    and the VSC7514. The VSC7513 and VSC7514 both have an internal MIPS
> > +    processor that natively support Linux. Additionally, all four devices
> > +    support control over external interfaces, SPI and PCIe. The Ocelot-Ext
> > +    driver is for the external control portion.
> > +
> > +    The following PHY interface type are currently supported:
> > +      - phy-mode = "internal": on ports 0, 1, 2, 3
> 
> "Currently supported" by hardware or by some specific, chosen
> implementation? If the latter, drop it. If the former, maybe this should
> be constrained in allOf:if:then.

Hi Krzysztof,

Currently supported by the software. This patch set explicitly adds
support for the four internal ports. There'll be another patch set right
around the corner that'll add QSGMII to ports 4-7.

I see your point though. I'll drop "currently" and have it match the
wording of the other drivers.