[PATCH 5.4 052/120] Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

[ Upstream commit fe0a2ac7c627b064c479ad0c3b25e531d342e048 ]

This reverts commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b as it
throws up a bunch of sparse warnings as reported by the kernel test
robot.

Reported-by: kernel test robot <lkp@xxxxxxxxx>
Link: https://lore.kernel.org/r/202209020044.CX2PfZzM-lkp@xxxxxxxxx
Fixes: 8cb339f1c1f0 ("usb: gadget: udc-xilinx: replace memcpy with memcpy_toio")
Cc: stable@xxxxxxxxxxxxxxx
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Piyush Mehta <piyush.mehta@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/usb/gadget/udc/udc-xilinx.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index 111d1e6d952f..de22dd543653 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -496,11 +496,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req,
 		/* Get the Buffer address and copy the transmit data.*/
 		eprambase = (u32 __force *)(udc->addr + ep->rambase);
 		if (ep->is_in) {
-			memcpy_toio(eprambase, bufferptr, bytestosend);
+			memcpy(eprambase, bufferptr, bytestosend);
 			udc->write_fn(udc->addr, ep->offset +
 				      XUSB_EP_BUF0COUNT_OFFSET, bufferlen);
 		} else {
-			memcpy_toio(bufferptr, eprambase, bytestosend);
+			memcpy(bufferptr, eprambase, bytestosend);
 		}
 		/*
 		 * Enable the buffer for transmission.
@@ -514,11 +514,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req,
 		eprambase = (u32 __force *)(udc->addr + ep->rambase +
 			     ep->ep_usb.maxpacket);
 		if (ep->is_in) {
-			memcpy_toio(eprambase, bufferptr, bytestosend);
+			memcpy(eprambase, bufferptr, bytestosend);
 			udc->write_fn(udc->addr, ep->offset +
 				      XUSB_EP_BUF1COUNT_OFFSET, bufferlen);
 		} else {
-			memcpy_toio(bufferptr, eprambase, bytestosend);
+			memcpy(bufferptr, eprambase, bytestosend);
 		}
 		/*
 		 * Enable the buffer for transmission.
@@ -1020,7 +1020,7 @@ static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req)
 			   udc->addr);
 		length = req->usb_req.actual = min_t(u32, length,
 						     EP0_MAX_PACKET);
-		memcpy_toio(corebuf, req->usb_req.buf, length);
+		memcpy(corebuf, req->usb_req.buf, length);
 		udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length);
 		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
 	} else {
@@ -1746,7 +1746,7 @@ static void xudc_handle_setup(struct xusb_udc *udc)
 
 	/* Load up the chapter 9 command buffer.*/
 	ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET);
-	memcpy_toio(&setup, ep0rambase, 8);
+	memcpy(&setup, ep0rambase, 8);
 
 	udc->setup = setup;
 	udc->setup.wValue = cpu_to_le16(setup.wValue);
@@ -1833,7 +1833,7 @@ static void xudc_ep0_out(struct xusb_udc *udc)
 			     (ep0->rambase << 2));
 		buffer = req->usb_req.buf + req->usb_req.actual;
 		req->usb_req.actual = req->usb_req.actual + bytes_to_rx;
-		memcpy_toio(buffer, ep0rambase, bytes_to_rx);
+		memcpy(buffer, ep0rambase, bytes_to_rx);
 
 		if (req->usb_req.length == req->usb_req.actual) {
 			/* Data transfer completed get ready for Status stage */
@@ -1909,7 +1909,7 @@ static void xudc_ep0_in(struct xusb_udc *udc)
 				     (ep0->rambase << 2));
 			buffer = req->usb_req.buf + req->usb_req.actual;
 			req->usb_req.actual = req->usb_req.actual + length;
-			memcpy_toio(ep0rambase, buffer, length);
+			memcpy(ep0rambase, buffer, length);
 		}
 		udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count);
 		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
-- 
2.35.1