On Mon, Sep 26, 2022 at 03:02:22PM -0700, Tanmay Shah wrote:
On 9/1/22 1:25 PM, Mathieu Poirier wrote:Commit bf7fbeeae6db is an interesting read - thanks for pointing it out.
On Thu, Jul 07, 2022 at 06:39:55PM -0700, Tanmay Shah wrote:[ ... ]
Hi Mathieu,--- /dev/null
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -0,0 +1,1055 @@
+// SPDX-License-Identifier: GPL-2.0
I tried to fix SPDX-License-Identifier to GPL (same as MODULE_LICENSE
below), However checkpatch.pl reports this as following warning:
"WARNING: 'SPDX-License-Identifier: GPL' is not supported in LICENSES/..."
I see that GPL-1.0 is under LICENSE/deprecated directory.
[ ... ]+/*
+ * ZynqMP R5 Remote Processor driver
+ *
+ */
+
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
Also, changing to MODULE_LICENSE("GPL v2") gives following warning:+MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);There is a discrepency between the GPL-2.0 in the SPDS identifier and the above.
+
+static struct platform_driver zynqmp_r5_remoteproc_driver = {
+ .probe = zynqmp_r5_remoteproc_probe,
+ .driver = {
+ .name = "zynqmp_r5_remoteproc",
+ .of_match_table = zynqmp_r5_remoteproc_match,
+ },
+};
+module_platform_driver(zynqmp_r5_remoteproc_driver);
+
+MODULE_DESCRIPTION("Xilinx R5F remote processor driver");
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL");
WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module: Cure
the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
#1115: FILE: drivers/remoteproc/xlnx_r5_remoteproc.c:1034:
+MODULE_LICENSE("GPL v2");
So, It looks like SPDX-License-Identifier should be GPL-2.0-only and
MODULE_LICENSE should be change to "GPL".
It this ok? Any other suggestions ?What you have looks good, in that regard there is no need to change anything
from your patch.
Thanks,
Tanmay
More comments tomorrow or Tuesday.
Thanks,
Mathieu
--
2.25.1