[PATCH RESEND v12 6/8] dt-bindings: clk: baikal-t1: Add DDR/PCIe reset IDs

[Serge Semin]

Aside with a set of the trigger-like resets Baikal-T1 CCU provides
additional directly controlled reset signals for the DDR and PCIe
controllers. As a preparation before adding these resets support to the
kernel let's extent the Baikal-T1 CCU IDs list with the new IDs, which
will be used to access the corresponding reset controls.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>

---

Changelog v11:
- This is a new patch created by detaching the DT-part from:
[PATCH v10 6/7] clk: baikal-t1: Add DDR/PCIe directly controlled resets support
  (@Krzysztof)
---
 include/dt-bindings/reset/bt1-ccu.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/dt-bindings/reset/bt1-ccu.h b/include/dt-bindings/reset/bt1-ccu.h
index 3578e83026bc..c691efaa678f 100644
--- a/include/dt-bindings/reset/bt1-ccu.h
+++ b/include/dt-bindings/reset/bt1-ccu.h
@@ -21,5 +21,14 @@
 
 #define CCU_SYS_SATA_REF_RST		0
 #define CCU_SYS_APB_RST			1
+#define CCU_SYS_DDR_FULL_RST		2
+#define CCU_SYS_DDR_INIT_RST		3
+#define CCU_SYS_PCIE_PCS_PHY_RST	4
+#define CCU_SYS_PCIE_PIPE0_RST		5
+#define CCU_SYS_PCIE_CORE_RST		6
+#define CCU_SYS_PCIE_PWR_RST		7
+#define CCU_SYS_PCIE_STICKY_RST		8
+#define CCU_SYS_PCIE_NSTICKY_RST	9
+#define CCU_SYS_PCIE_HOT_RST		10
 
 #endif /* __DT_BINDINGS_RESET_BT1_CCU_H */
-- 
2.37.3