[PATCH 5.19 082/101] net: phy: Dont WARN for PHY_UP state in mdio_bus_phy_resume()

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@xxxxxxxxx>

[ Upstream commit ea64cdfad124922c931633e39287c5a31a9b14a1 ]

Commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume()
state") introduced a WARN() on resume from system sleep if a PHY is not
in PHY_HALTED state.

Commit 6dbe852c379f ("net: phy: Don't WARN for PHY_READY state in
mdio_bus_phy_resume()") added an exemption for PHY_READY state from
the WARN().

It turns out PHY_UP state needs to be exempted as well because the
following may happen on suspend:

  mdio_bus_phy_suspend()
    phy_stop_machine()
      phydev->state = PHY_UP  #  if (phydev->state >= PHY_UP)

Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Link: https://lore.kernel.org/netdev/2b1a1588-505e-dff3-301d-bfc1fb14d685@xxxxxxxxxxx/
Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Cc: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/8128fdb51eeebc9efbf3776a4097363a1317aaf1.1663905575.git.lukas@xxxxxxxxx
Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/phy/phy_device.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f90a21781d8d..adc9d97cbb88 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -316,11 +316,13 @@ static __maybe_unused int mdio_bus_phy_resume(struct device *dev)
 
 	phydev->suspended_by_mdio_bus = 0;
 
-	/* If we manged to get here with the PHY state machine in a state neither
-	 * PHY_HALTED nor PHY_READY this is an indication that something went wrong
-	 * and we should most likely be using MAC managed PM and we are not.
+	/* If we managed to get here with the PHY state machine in a state
+	 * neither PHY_HALTED, PHY_READY nor PHY_UP, this is an indication
+	 * that something went wrong and we should most likely be using
+	 * MAC managed PM, but we are not.
 	 */
-	WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY);
+	WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
+		phydev->state != PHY_UP);
 
 	ret = phy_init_hw(phydev);
 	if (ret < 0)
-- 
2.35.1