[PATCH v3 16/23] perf vendor events: Update Intel ivytown

[Ian Rogers]

Events are updated to v22 the core metrics are based on TMA 4.4 full.

Use script at:
https://github.com/intel/event-converter-for-linux-perf/blob/master/download_and_gen.py
with updates at:
https://github.com/captain5050/event-converter-for-linux-perf

Updates include:
 - Rename of topdown TMA metrics from Frontend_Bound to tma_frontend_bound.
 - _SMT suffix metrics are dropped as the #SMT_On and #EBS_Mode are
   correctly expanded in the single main metric.
 - Addition of all 6 levels of TMA metrics. Child metrics are placed in
   a group named after their parent allowing children of a metric to
   be easily measured using the metric name with a _group suffix.
 - ## and ##? operators are correctly expanded.
 - The locate-with column is added to the long description describing
   a sampling event.
 - Metrics are written in terms of other metrics to reduce the
   expression size and increase readability.

Tested with 'perf test':
 10: PMU events                                                      :
 10.1: PMU event table sanity                                        : Ok
 10.2: PMU event map aliases                                         : Ok
 10.3: Parsing of PMU event table metrics                            : Ok
 10.4: Parsing of PMU event table metrics with fake PMUs             : Ok

Signed-off-by: Ian Rogers <irogers@xxxxxxxxxx>
---
 .../pmu-events/arch/x86/ivytown/cache.json    |   4 +-
 .../arch/x86/ivytown/floating-point.json      |   2 +-
 .../pmu-events/arch/x86/ivytown/frontend.json |  18 +-
 .../arch/x86/ivytown/ivt-metrics.json         | 630 +++++++++++++++---
 .../arch/x86/ivytown/uncore-cache.json        |  58 +-
 .../arch/x86/ivytown/uncore-interconnect.json |  84 +--
 .../arch/x86/ivytown/uncore-memory.json       |   2 +-
 .../arch/x86/ivytown/uncore-other.json        |   6 +-
 .../arch/x86/ivytown/uncore-power.json        |   8 +-
 tools/perf/pmu-events/arch/x86/mapfile.csv    |   2 +-
 10 files changed, 625 insertions(+), 189 deletions(-)

diff --git a/tools/perf/pmu-events/arch/x86/ivytown/cache.json b/tools/perf/pmu-events/arch/x86/ivytown/cache.json
index 27576d53b347..d95b98c83914 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/cache.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/cache.json
@@ -21,7 +21,7 @@
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "L1D miss oustandings duration in cycles",
+        "BriefDescription": "L1D miss outstanding duration in cycles",
         "Counter": "2",
         "CounterHTOff": "2",
         "EventCode": "0x48",
@@ -658,7 +658,7 @@
         "UMask": "0x8"
     },
     {
-        "BriefDescription": "Cacheable and noncachaeble code read requests",
+        "BriefDescription": "Cacheable and noncacheable code read requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xB0",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/floating-point.json b/tools/perf/pmu-events/arch/x86/ivytown/floating-point.json
index 4c2ac010cf55..88891cba54ec 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/floating-point.json
@@ -91,7 +91,7 @@
         "UMask": "0x20"
     },
     {
-        "BriefDescription": "Number of FP Computational Uops Executed this cycle. The number of FADD, FSUB, FCOM, FMULs, integer MULsand IMULs, FDIVs, FPREMs, FSQRTS, integer DIVs, and IDIVs. This event does not distinguish an FADD used in the middle of a transcendental flow from a s",
+        "BriefDescription": "Number of FP Computational Uops Executed this cycle. The number of FADD, FSUB, FCOM, FMULs, integer MULs and IMULs, FDIVs, FPREMs, FSQRTS, integer DIVs, and IDIVs. This event does not distinguish an FADD used in the middle of a transcendental flow from a s",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x10",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/frontend.json b/tools/perf/pmu-events/arch/x86/ivytown/frontend.json
index 2b1a82dd86ab..0a295c4e093d 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/frontend.json
@@ -176,41 +176,41 @@
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
         "EventCode": "0x79",
         "EventName": "IDQ.MS_CYCLES",
-        "PublicDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.",
+        "PublicDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.",
         "SampleAfterValue": "2000003",
         "UMask": "0x30"
     },
     {
-        "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
         "EventCode": "0x79",
         "EventName": "IDQ.MS_DSB_CYCLES",
-        "PublicDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.",
+        "PublicDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.",
         "SampleAfterValue": "2000003",
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequencer (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
         "EdgeDetect": "1",
         "EventCode": "0x79",
         "EventName": "IDQ.MS_DSB_OCCUR",
-        "PublicDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequenser (MS) is busy.",
+        "PublicDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequencer (MS) is busy.",
         "SampleAfterValue": "2000003",
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x79",
@@ -220,7 +220,7 @@
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x79",
@@ -242,7 +242,7 @@
         "UMask": "0x30"
     },
     {
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x79",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json b/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
index 19c7f3b41102..99a45c8d8cee 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json
@@ -1,64 +1,524 @@
 [
     {
         "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend",
-        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Frontend_Bound",
-        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound."
+        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / SLOTS",
+        "MetricGroup": "PGO;TopdownL1;tma_L1_group",
+        "MetricName": "tma_frontend_bound",
+        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.",
+        "ScaleUnit": "100%"
     },
     {
-        "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Frontend_Bound_SMT",
-        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
+        "BriefDescription": "This metric represents fraction of slots the CPU was stalled due to Frontend latency issues",
+        "MetricExpr": "4 * min(CPU_CLK_UNHALTED.THREAD, IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE) / SLOTS",
+        "MetricGroup": "Frontend;TopdownL2;tma_L2_group;tma_frontend_bound_group",
+        "MetricName": "tma_fetch_latency",
+        "PublicDescription": "This metric represents fraction of slots the CPU was stalled due to Frontend latency issues.  For example; instruction-cache misses; iTLB misses or fetch stalls after a branch misprediction are categorized under Frontend Latency. In such cases; the Frontend eventually delivers no uops for some period. Sample with: RS_EVENTS.EMPTY_END",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles the CPU was stalled due to instruction cache misses.",
+        "MetricExpr": "ICACHE.IFETCH_STALL / CLKS - tma_itlb_misses",
+        "MetricGroup": "BigFoot;FetchLat;IcMiss;TopdownL3;tma_fetch_latency_group",
+        "MetricName": "tma_icache_misses",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles the CPU was stalled due to Instruction TLB (ITLB) misses",
+        "MetricExpr": "(12 * ITLB_MISSES.STLB_HIT + ITLB_MISSES.WALK_DURATION) / CLKS",
+        "MetricGroup": "BigFoot;FetchLat;MemoryTLB;TopdownL3;tma_fetch_latency_group",
+        "MetricName": "tma_itlb_misses",
+        "PublicDescription": "This metric represents fraction of cycles the CPU was stalled due to Instruction TLB (ITLB) misses. Sample with: ITLB_MISSES.WALK_COMPLETED",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles the CPU was stalled due to Branch Resteers",
+        "MetricExpr": "12 * (BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT + BACLEARS.ANY) / CLKS",
+        "MetricGroup": "FetchLat;TopdownL3;tma_fetch_latency_group",
+        "MetricName": "tma_branch_resteers",
+        "PublicDescription": "This metric represents fraction of cycles the CPU was stalled due to Branch Resteers. Branch Resteers estimates the Frontend delay in fetching operations from corrected path; following all sorts of miss-predicted branches. For example; branchy code with lots of miss-predictions might get categorized under Branch Resteers. Note the value of this node may overlap with its siblings. Sample with: BR_MISP_RETIRED.ALL_BRANCHES",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles the CPU was stalled due to switches from DSB to MITE pipelines",
+        "MetricExpr": "DSB2MITE_SWITCHES.PENALTY_CYCLES / CLKS",
+        "MetricGroup": "DSBmiss;FetchLat;TopdownL3;tma_fetch_latency_group",
+        "MetricName": "tma_dsb_switches",
+        "PublicDescription": "This metric represents fraction of cycles the CPU was stalled due to switches from DSB to MITE pipelines. The DSB (decoded i-cache) is a Uop Cache where the front-end directly delivers Uops (micro operations) avoiding heavy x86 decoding. The DSB pipeline has shorter latency and delivered higher bandwidth than the MITE (legacy instruction decode pipeline). Switching between the two pipelines can cause penalties hence this metric measures the exposed penalty.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles CPU was stalled due to Length Changing Prefixes (LCPs)",
+        "MetricExpr": "ILD_STALL.LCP / CLKS",
+        "MetricGroup": "FetchLat;TopdownL3;tma_fetch_latency_group",
+        "MetricName": "tma_lcp",
+        "PublicDescription": "This metric represents fraction of cycles CPU was stalled due to Length Changing Prefixes (LCPs). Using proper compiler flags or Intel Compiler by default will certainly avoid this. #Link: Optimization Guide about LCP BKMs.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates the fraction of cycles when the CPU was stalled due to switches of uop delivery to the Microcode Sequencer (MS)",
+        "MetricExpr": "3 * IDQ.MS_SWITCHES / CLKS",
+        "MetricGroup": "FetchLat;MicroSeq;TopdownL3;tma_fetch_latency_group",
+        "MetricName": "tma_ms_switches",
+        "PublicDescription": "This metric estimates the fraction of cycles when the CPU was stalled due to switches of uop delivery to the Microcode Sequencer (MS). Commonly used instructions are optimized for delivery by the DSB (decoded i-cache) or MITE (legacy instruction decode) pipelines. Certain operations cannot be handled natively by the execution pipeline; and must be performed by microcode (small programs injected into the execution stream). Switching to the MS too often can negatively impact performance. The MS is designated to deliver long uop flows required by CISC instructions like CPUID; or uncommon conditions like Floating Point Assists when dealing with Denormals. Sample with: IDQ.MS_SWITCHES",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of slots the CPU was stalled due to Frontend bandwidth issues",
+        "MetricExpr": "tma_frontend_bound - tma_fetch_latency",
+        "MetricGroup": "FetchBW;Frontend;TopdownL2;tma_L2_group;tma_frontend_bound_group",
+        "MetricName": "tma_fetch_bandwidth",
+        "PublicDescription": "This metric represents fraction of slots the CPU was stalled due to Frontend bandwidth issues.  For example; inefficiencies at the instruction decoders; or restrictions for caching in the DSB (decoded uops cache) are categorized under Fetch Bandwidth. In such cases; the Frontend typically delivers suboptimal amount of uops to the Backend.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles in which CPU was likely limited due to the MITE pipeline (the legacy decode pipeline)",
+        "MetricExpr": "(IDQ.ALL_MITE_CYCLES_ANY_UOPS - IDQ.ALL_MITE_CYCLES_4_UOPS) / CORE_CLKS / 2",
+        "MetricGroup": "DSBmiss;FetchBW;TopdownL3;tma_fetch_bandwidth_group",
+        "MetricName": "tma_mite",
+        "PublicDescription": "This metric represents Core fraction of cycles in which CPU was likely limited due to the MITE pipeline (the legacy decode pipeline). This pipeline is used for code that was not pre-cached in the DSB or LSD. For example; inefficiencies due to asymmetric decoders; use of long immediate or LCP can manifest as MITE fetch bandwidth bottleneck.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles in which CPU was likely limited due to DSB (decoded uop cache) fetch pipeline",
+        "MetricExpr": "(IDQ.ALL_DSB_CYCLES_ANY_UOPS - IDQ.ALL_DSB_CYCLES_4_UOPS) / CORE_CLKS / 2",
+        "MetricGroup": "DSB;FetchBW;TopdownL3;tma_fetch_bandwidth_group",
+        "MetricName": "tma_dsb",
+        "PublicDescription": "This metric represents Core fraction of cycles in which CPU was likely limited due to DSB (decoded uop cache) fetch pipeline.  For example; inefficient utilization of the DSB cache structure or bank conflict when reading from it; are categorized here.",
+        "ScaleUnit": "100%"
     },
     {
         "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations",
-        "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Bad_Speculation",
-        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example."
+        "MetricExpr": "(UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ((INT_MISC.RECOVERY_CYCLES_ANY / 2) if #SMT_on else INT_MISC.RECOVERY_CYCLES)) / SLOTS",
+        "MetricGroup": "TopdownL1;tma_L1_group",
+        "MetricName": "tma_bad_speculation",
+        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.",
+        "ScaleUnit": "100%"
     },
     {
-        "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Bad_Speculation_SMT",
-        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU."
+        "BriefDescription": "This metric represents fraction of slots the CPU has wasted due to Branch Misprediction",
+        "MetricExpr": "(BR_MISP_RETIRED.ALL_BRANCHES / (BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT)) * tma_bad_speculation",
+        "MetricGroup": "BadSpec;BrMispredicts;TopdownL2;tma_L2_group;tma_bad_speculation_group",
+        "MetricName": "tma_branch_mispredicts",
+        "PublicDescription": "This metric represents fraction of slots the CPU has wasted due to Branch Misprediction.  These slots are either wasted by uops fetched from an incorrectly speculated program path; or stalls when the out-of-order part of the machine needs to recover its state from a speculative path. Sample with: BR_MISP_RETIRED.ALL_BRANCHES",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of slots the CPU has wasted due to Machine Clears",
+        "MetricExpr": "tma_bad_speculation - tma_branch_mispredicts",
+        "MetricGroup": "BadSpec;MachineClears;TopdownL2;tma_L2_group;tma_bad_speculation_group",
+        "MetricName": "tma_machine_clears",
+        "PublicDescription": "This metric represents fraction of slots the CPU has wasted due to Machine Clears.  These slots are either wasted by uops fetched prior to the clear; or stalls the out-of-order portion of the machine needs to recover its state after the clear. For example; this can happen due to memory ordering Nukes (e.g. Memory Disambiguation) or Self-Modifying-Code (SMC) nukes. Sample with: MACHINE_CLEARS.COUNT",
+        "ScaleUnit": "100%"
     },
     {
         "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend",
-        "MetricConstraint": "NO_NMI_WATCHDOG",
-        "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * CPU_CLK_UNHALTED.THREAD)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * CPU_CLK_UNHALTED.THREAD)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)) )",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Backend_Bound",
-        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound."
+        "MetricExpr": "1 - (tma_frontend_bound + tma_bad_speculation + tma_retiring)",
+        "MetricGroup": "TopdownL1;tma_L1_group",
+        "MetricName": "tma_backend_bound",
+        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of slots the Memory subsystem within the Backend was a bottleneck",
+        "MetricExpr": "((min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.STALLS_LDM_PENDING) + RESOURCE_STALLS.SB) / (min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) + UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC if (IPC > 1.8) else UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - RS_EVENTS.EMPTY_CYCLES if (tma_fetch_latency > 0.1) else RESOURCE_STALLS.SB)) * tma_backend_bound",
+        "MetricGroup": "Backend;TopdownL2;tma_L2_group;tma_backend_bound_group",
+        "MetricName": "tma_memory_bound",
+        "PublicDescription": "This metric represents fraction of slots the Memory subsystem within the Backend was a bottleneck.  Memory Bound estimates fraction of slots where pipeline is likely stalled due to demand load or store instructions. This accounts mainly for (1) non-completed in-flight memory demand loads which coincides with execution units starvation; in addition to (2) cases where stores could impose backpressure on the pipeline when many of them get buffered at the same time (less common out of the two).",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates how often the CPU was stalled without loads missing the L1 data cache",
+        "MetricExpr": "max((min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.STALLS_LDM_PENDING) - CYCLE_ACTIVITY.STALLS_L1D_PENDING) / CLKS, 0)",
+        "MetricGroup": "CacheMisses;MemoryBound;TmaL3mem;TopdownL3;tma_memory_bound_group",
+        "MetricName": "tma_l1_bound",
+        "PublicDescription": "This metric estimates how often the CPU was stalled without loads missing the L1 data cache.  The L1 data cache typically has the shortest latency.  However; in certain cases like loads blocked on older stores; a load might suffer due to high latency even though it is being satisfied by the L1. Another example is loads who miss in the TLB. These cases are characterized by execution unit stalls; while some non-completed demand load lives in the machine without having that demand load missing the L1 cache. Sample with: MEM_LOAD_UOPS_RETIRED.L1_HIT_PS;MEM_LOAD_UOPS_RETIRED.HIT_LFB_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric roughly estimates the fraction of cycles where the Data TLB (DTLB) was missed by load accesses",
+        "MetricExpr": "(7 * DTLB_LOAD_MISSES.STLB_HIT + DTLB_LOAD_MISSES.WALK_DURATION) / CLKS",
+        "MetricGroup": "MemoryTLB;TopdownL4;tma_l1_bound_group",
+        "MetricName": "tma_dtlb_load",
+        "PublicDescription": "This metric roughly estimates the fraction of cycles where the Data TLB (DTLB) was missed by load accesses. TLBs (Translation Look-aside Buffers) are processor caches for recently used entries out of the Page Tables that are used to map virtual- to physical-addresses by the operating system. This metric approximates the potential delay of demand loads missing the first-level data TLB (assuming worst case scenario with back to back misses to different pages). This includes hitting in the second-level TLB (STLB) as well as performing a hardware page walk on an STLB miss. Sample with: MEM_UOPS_RETIRED.STLB_MISS_LOADS_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric roughly estimates fraction of cycles when the memory subsystem had loads blocked since they could not forward data from earlier (in program order) overlapping stores",
+        "MetricExpr": "13 * LD_BLOCKS.STORE_FORWARD / CLKS",
+        "MetricGroup": "TopdownL4;tma_l1_bound_group",
+        "MetricName": "tma_store_fwd_blk",
+        "PublicDescription": "This metric roughly estimates fraction of cycles when the memory subsystem had loads blocked since they could not forward data from earlier (in program order) overlapping stores. To streamline memory operations in the pipeline; a load can avoid waiting for memory if a prior in-flight store is writing the data that the load wants to read (store forwarding process). However; in some cases the load may be blocked for a significant time pending the store forward. For example; when the prior store is writing a smaller region than the load is reading.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles the CPU spent handling cache misses due to lock operations",
+        "MetricExpr": "(MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES) * min(CPU_CLK_UNHALTED.THREAD, OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO) / CLKS",
+        "MetricGroup": "Offcore;TopdownL4;tma_l1_bound_group",
+        "MetricName": "tma_lock_latency",
+        "PublicDescription": "This metric represents fraction of cycles the CPU spent handling cache misses due to lock operations. Due to the microarchitecture handling of locks; they are classified as L1_Bound regardless of what memory source satisfied them. Sample with: MEM_UOPS_RETIRED.LOCK_LOADS_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles handling memory load split accesses - load that cross 64-byte cache line boundary",
+        "MetricExpr": "13 * LD_BLOCKS.NO_SR / CLKS",
+        "MetricGroup": "TopdownL4;tma_l1_bound_group",
+        "MetricName": "tma_split_loads",
+        "PublicDescription": "This metric estimates fraction of cycles handling memory load split accesses - load that cross 64-byte cache line boundary.  Sample with: MEM_UOPS_RETIRED.SPLIT_LOADS_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates how often memory load accesses were aliased by preceding stores (in program order) with a 4K address offset",
+        "MetricExpr": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS / CLKS",
+        "MetricGroup": "TopdownL4;tma_l1_bound_group",
+        "MetricName": "tma_4k_aliasing",
+        "PublicDescription": "This metric estimates how often memory load accesses were aliased by preceding stores (in program order) with a 4K address offset. False match is possible; which incur a few cycles load re-issue. However; the short re-issue duration is often hidden by the out-of-order core and HW optimizations; hence a user may safely ignore a high value of this metric unless it manages to propagate up into parent nodes of the hierarchy (e.g. to L1_Bound).",
+        "ScaleUnit": "100%"
     },
     {
-        "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) )",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Backend_Bound_SMT",
-        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
+        "BriefDescription": "This metric does a *rough estimation* of how often L1D Fill Buffer unavailability limited additional L1D miss memory access requests to proceed",
+        "MetricExpr": "Load_Miss_Real_Latency * cpu@L1D_PEND_MISS.FB_FULL\\,cmask\\=1@ / CLKS",
+        "MetricGroup": "MemoryBW;TopdownL4;tma_l1_bound_group",
+        "MetricName": "tma_fb_full",
+        "PublicDescription": "This metric does a *rough estimation* of how often L1D Fill Buffer unavailability limited additional L1D miss memory access requests to proceed. The higher the metric value; the deeper the memory hierarchy level the misses are satisfied from (metric values >1 are valid). Often it hints on approaching bandwidth limits (to L2 cache; L3 cache or external memory).",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates how often the CPU was stalled due to L2 cache accesses by loads",
+        "MetricExpr": "(CYCLE_ACTIVITY.STALLS_L1D_PENDING - CYCLE_ACTIVITY.STALLS_L2_PENDING) / CLKS",
+        "MetricGroup": "CacheMisses;MemoryBound;TmaL3mem;TopdownL3;tma_memory_bound_group",
+        "MetricName": "tma_l2_bound",
+        "PublicDescription": "This metric estimates how often the CPU was stalled due to L2 cache accesses by loads.  Avoiding cache misses (i.e. L1 misses/L2 hits) can improve the latency and increase performance. Sample with: MEM_LOAD_UOPS_RETIRED.L2_HIT_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates how often the CPU was stalled due to loads accesses to L3 cache or contended with a sibling Core",
+        "MetricExpr": "(MEM_LOAD_UOPS_RETIRED.LLC_HIT / (MEM_LOAD_UOPS_RETIRED.LLC_HIT + 7 * MEM_LOAD_UOPS_RETIRED.LLC_MISS)) * CYCLE_ACTIVITY.STALLS_L2_PENDING / CLKS",
+        "MetricGroup": "CacheMisses;MemoryBound;TmaL3mem;TopdownL3;tma_memory_bound_group",
+        "MetricName": "tma_l3_bound",
+        "PublicDescription": "This metric estimates how often the CPU was stalled due to loads accesses to L3 cache or contended with a sibling Core.  Avoiding cache misses (i.e. L2 misses/L3 hits) can improve the latency and increase performance. Sample with: MEM_LOAD_UOPS_RETIRED.L3_HIT_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling synchronizations due to contested accesses",
+        "MetricExpr": "(60 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) + 43 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD)))) / CLKS",
+        "MetricGroup": "DataSharing;Offcore;Snoop;TopdownL4;tma_l3_bound_group",
+        "MetricName": "tma_contested_accesses",
+        "PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling synchronizations due to contested accesses. Contested accesses occur when data written by one Logical Processor are read by another Logical Processor on a different Physical Core. Examples of contested accesses include synchronizations such as locks; true data sharing such as modified locked variables; and false sharing. Sample with: MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM_PS;MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling synchronizations due to data-sharing accesses",
+        "MetricExpr": "43 * (MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
+        "MetricGroup": "Offcore;Snoop;TopdownL4;tma_l3_bound_group",
+        "MetricName": "tma_data_sharing",
+        "PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling synchronizations due to data-sharing accesses. Data shared by multiple Logical Processors (even just read shared) may cause increased access latency due to cache coherency. Excessive data sharing can drastically harm multithreaded performance. Sample with: MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles with demand load accesses that hit the L3 cache under unloaded scenarios (possibly L3 latency limited)",
+        "MetricExpr": "41 * (MEM_LOAD_UOPS_RETIRED.LLC_HIT * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
+        "MetricGroup": "MemoryLat;TopdownL4;tma_l3_bound_group",
+        "MetricName": "tma_l3_hit_latency",
+        "PublicDescription": "This metric represents fraction of cycles with demand load accesses that hit the L3 cache under unloaded scenarios (possibly L3 latency limited).  Avoiding private cache misses (i.e. L2 misses/L3 hits) will improve the latency; reduce contention with sibling physical cores and increase performance.  Note the value of this node may overlap with its siblings. Sample with: MEM_LOAD_UOPS_RETIRED.L3_HIT_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric measures fraction of cycles where the Super Queue (SQ) was full taking into account all request-types and both hardware SMT threads (Logical Processors)",
+        "MetricExpr": "((OFFCORE_REQUESTS_BUFFER.SQ_FULL / 2) if #SMT_on else OFFCORE_REQUESTS_BUFFER.SQ_FULL) / CORE_CLKS",
+        "MetricGroup": "MemoryBW;Offcore;TopdownL4;tma_l3_bound_group",
+        "MetricName": "tma_sq_full",
+        "PublicDescription": "This metric measures fraction of cycles where the Super Queue (SQ) was full taking into account all request-types and both hardware SMT threads (Logical Processors). The Super Queue is used for requests to access the L2 cache or to go out to the Uncore.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates how often the CPU was stalled on accesses to external memory (DRAM) by loads",
+        "MetricExpr": "(1 - (MEM_LOAD_UOPS_RETIRED.LLC_HIT / (MEM_LOAD_UOPS_RETIRED.LLC_HIT + 7 * MEM_LOAD_UOPS_RETIRED.LLC_MISS))) * CYCLE_ACTIVITY.STALLS_L2_PENDING / CLKS",
+        "MetricGroup": "MemoryBound;TmaL3mem;TopdownL3;tma_memory_bound_group",
+        "MetricName": "tma_dram_bound",
+        "PublicDescription": "This metric estimates how often the CPU was stalled on accesses to external memory (DRAM) by loads. Better caching can improve the latency and increase performance. Sample with: MEM_LOAD_UOPS_RETIRED.L3_MISS_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles where the core's performance was likely hurt due to approaching bandwidth limits of external memory (DRAM)",
+        "MetricExpr": "min(CPU_CLK_UNHALTED.THREAD, cpu@OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD\\,cmask\\=6@) / CLKS",
+        "MetricGroup": "MemoryBW;Offcore;TopdownL4;tma_dram_bound_group",
+        "MetricName": "tma_mem_bandwidth",
+        "PublicDescription": "This metric estimates fraction of cycles where the core's performance was likely hurt due to approaching bandwidth limits of external memory (DRAM).  The underlying heuristic assumes that a similar off-core traffic is generated by all IA cores. This metric does not aggregate non-data-read requests by this logical processor; requests from other IA Logical Processors/Physical Cores/sockets; or other non-IA devices like GPU; hence the maximum external memory bandwidth limits may or may not be approached when this metric is flagged (see Uncore counters for that).",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles where the performance was likely hurt due to latency from external memory (DRAM)",
+        "MetricExpr": "min(CPU_CLK_UNHALTED.THREAD, OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD) / CLKS - tma_mem_bandwidth",
+        "MetricGroup": "MemoryLat;Offcore;TopdownL4;tma_dram_bound_group",
+        "MetricName": "tma_mem_latency",
+        "PublicDescription": "This metric estimates fraction of cycles where the performance was likely hurt due to latency from external memory (DRAM).  This metric does not aggregate requests from other Logical Processors/Physical Cores/sockets (see Uncore counters for that).",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from local memory",
+        "MetricExpr": "200 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
+        "MetricGroup": "Server;TopdownL5;tma_mem_latency_group",
+        "MetricName": "tma_local_dram",
+        "PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from local memory. Caching will improve the latency and increase performance. Sample with: MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from remote memory",
+        "MetricExpr": "310 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) / CLKS",
+        "MetricGroup": "Server;Snoop;TopdownL5;tma_mem_latency_group",
+        "MetricName": "tma_remote_dram",
+        "PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from remote memory. This is caused often due to non-optimal NUMA allocations. #link to NUMA article Sample with: MEM_LOAD_UOPS_L3_MISS_RETIRED.REMOTE_DRAM_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from remote cache in other sockets including synchronizations issues",
+        "MetricExpr": "(200 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD))) + 180 * (MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD * (1 + mem_load_uops_retired.hit_lfb / ((MEM_LOAD_UOPS_RETIRED.L2_HIT + MEM_LOAD_UOPS_RETIRED.LLC_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM + MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS) + MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_DRAM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_HITM + MEM_LOAD_UOPS_LLC_MISS_RETIRED.REMOTE_FWD)))) / CLKS",
+        "MetricGroup": "Offcore;Server;Snoop;TopdownL5;tma_mem_latency_group",
+        "MetricName": "tma_remote_cache",
+        "PublicDescription": "This metric estimates fraction of cycles while the memory subsystem was handling loads from remote cache in other sockets including synchronizations issues. This is caused often due to non-optimal NUMA allocations. #link to NUMA article Sample with: MEM_LOAD_UOPS_L3_MISS_RETIRED.REMOTE_HITM_PS;MEM_LOAD_UOPS_L3_MISS_RETIRED.REMOTE_FWD_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates how often CPU was stalled  due to RFO store memory accesses; RFO store issue a read-for-ownership request before the write",
+        "MetricExpr": "RESOURCE_STALLS.SB / CLKS",
+        "MetricGroup": "MemoryBound;TmaL3mem;TopdownL3;tma_memory_bound_group",
+        "MetricName": "tma_store_bound",
+        "PublicDescription": "This metric estimates how often CPU was stalled  due to RFO store memory accesses; RFO store issue a read-for-ownership request before the write. Even though store accesses do not typically stall out-of-order CPUs; there are few cases where stores can lead to actual stalls. This metric will be flagged should RFO stores be a bottleneck. Sample with: MEM_UOPS_RETIRED.ALL_STORES_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles the CPU spent handling L1D store misses",
+        "MetricExpr": "((L2_RQSTS.RFO_HIT * 9 * (1 - (MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES))) + (1 - (MEM_UOPS_RETIRED.LOCK_LOADS / MEM_UOPS_RETIRED.ALL_STORES)) * min(CPU_CLK_UNHALTED.THREAD, OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO)) / CLKS",
+        "MetricGroup": "MemoryLat;Offcore;TopdownL4;tma_store_bound_group",
+        "MetricName": "tma_store_latency",
+        "PublicDescription": "This metric estimates fraction of cycles the CPU spent handling L1D store misses. Store accesses usually less impact out-of-order core performance; however; holding resources for longer time can lead into undesired implications (e.g. contention on L1D fill-buffer entries - see FB_Full)",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric roughly estimates how often CPU was handling synchronizations due to False Sharing",
+        "MetricExpr": "(200 * OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.REMOTE_HITM + 60 * OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE) / CLKS",
+        "MetricGroup": "DataSharing;Offcore;Snoop;TopdownL4;tma_store_bound_group",
+        "MetricName": "tma_false_sharing",
+        "PublicDescription": "This metric roughly estimates how often CPU was handling synchronizations due to False Sharing. False Sharing is a multithreading hiccup; where multiple Logical Processors contend on different data-elements mapped into the same cache line.  Sample with: MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM_PS;OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HITM",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents rate of split store accesses",
+        "MetricExpr": "2 * MEM_UOPS_RETIRED.SPLIT_STORES / CORE_CLKS",
+        "MetricGroup": "TopdownL4;tma_store_bound_group",
+        "MetricName": "tma_split_stores",
+        "PublicDescription": "This metric represents rate of split store accesses.  Consider aligning your data to the 64-byte cache line granularity. Sample with: MEM_UOPS_RETIRED.SPLIT_STORES_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric roughly estimates the fraction of cycles spent handling first-level data TLB store misses",
+        "MetricExpr": "(7 * DTLB_STORE_MISSES.STLB_HIT + DTLB_STORE_MISSES.WALK_DURATION) / CLKS",
+        "MetricGroup": "MemoryTLB;TopdownL4;tma_store_bound_group",
+        "MetricName": "tma_dtlb_store",
+        "PublicDescription": "This metric roughly estimates the fraction of cycles spent handling first-level data TLB store misses.  As with ordinary data caching; focus on improving data locality and reducing working-set size to reduce DTLB overhead.  Additionally; consider using profile-guided optimization (PGO) to collocate frequently-used data on the same page.  Try using larger page sizes for large amounts of frequently-used data. Sample with: MEM_UOPS_RETIRED.STLB_MISS_STORES_PS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of slots where Core non-memory issues were of a bottleneck",
+        "MetricExpr": "tma_backend_bound - tma_memory_bound",
+        "MetricGroup": "Backend;Compute;TopdownL2;tma_L2_group;tma_backend_bound_group",
+        "MetricName": "tma_core_bound",
+        "PublicDescription": "This metric represents fraction of slots where Core non-memory issues were of a bottleneck.  Shortage in hardware compute resources; or dependencies in software's instructions are both categorized under Core Bound. Hence it may indicate the machine ran out of an out-of-order resource; certain execution units are overloaded or dependencies in program's data- or instruction-flow are limiting the performance (e.g. FP-chained long-latency arithmetic operations).",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles where the Divider unit was active",
+        "MetricExpr": "ARITH.FPU_DIV_ACTIVE / CORE_CLKS",
+        "MetricGroup": "TopdownL3;tma_core_bound_group",
+        "MetricName": "tma_divider",
+        "PublicDescription": "This metric represents fraction of cycles where the Divider unit was active. Divide and square root instructions are performed by the Divider unit and can take considerably longer latency than integer or Floating Point addition; subtraction; or multiplication. Sample with: ARITH.DIVIDER_UOPS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles the CPU performance was potentially limited due to Core computation issues (non divider-related)",
+        "MetricExpr": "((min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) + UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC if (IPC > 1.8) else UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - RS_EVENTS.EMPTY_CYCLES if (tma_fetch_latency > 0.1) else RESOURCE_STALLS.SB) - RESOURCE_STALLS.SB - min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.STALLS_LDM_PENDING)) / CLKS",
+        "MetricGroup": "PortsUtil;TopdownL3;tma_core_bound_group",
+        "MetricName": "tma_ports_utilization",
+        "PublicDescription": "This metric estimates fraction of cycles the CPU performance was potentially limited due to Core computation issues (non divider-related).  Two distinct categories can be attributed into this metric: (1) heavy data-dependency among contiguous instructions would manifest in this metric - such cases are often referred to as low Instruction Level Parallelism (ILP). (2) Contention on some hardware execution unit other than Divider. For example; when there are too many multiply operations.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles CPU executed no uops on any execution port (Logical Processor cycles since ICL, Physical Core cycles otherwise)",
+        "MetricExpr": "(cpu@UOPS_EXECUTED.CORE\\,inv\\,cmask\\=1@) / 2 if #SMT_on else (min(CPU_CLK_UNHALTED.THREAD, CYCLE_ACTIVITY.CYCLES_NO_EXECUTE) - RS_EVENTS.EMPTY_CYCLES if (tma_fetch_latency > 0.1) else 0) / CORE_CLKS",
+        "MetricGroup": "PortsUtil;TopdownL4;tma_ports_utilization_group",
+        "MetricName": "tma_ports_utilized_0",
+        "PublicDescription": "This metric represents fraction of cycles CPU executed no uops on any execution port (Logical Processor cycles since ICL, Physical Core cycles otherwise). Long-latency instructions like divides may contribute to this metric.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles where the CPU executed total of 1 uop per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise)",
+        "MetricExpr": "(cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ - cpu@UOPS_EXECUTED.CORE\\,cmask\\=2@) / 2 if #SMT_on else (UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC - UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC) / CORE_CLKS",
+        "MetricGroup": "PortsUtil;TopdownL4;tma_ports_utilization_group",
+        "MetricName": "tma_ports_utilized_1",
+        "PublicDescription": "This metric represents fraction of cycles where the CPU executed total of 1 uop per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise). This can be due to heavy data-dependency among software instructions; or over oversubscribing a particular hardware resource. In some other cases with high 1_Port_Utilized and L1_Bound; this metric can point to L1 data-cache latency bottleneck that may not necessarily manifest with complete execution starvation (due to the short L1 latency e.g. walking a linked list) - looking at the assembly can be helpful.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles CPU executed total of 2 uops per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise)",
+        "MetricExpr": "(cpu@UOPS_EXECUTED.CORE\\,cmask\\=2@ - cpu@UOPS_EXECUTED.CORE\\,cmask\\=3@) / 2 if #SMT_on else (UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC - UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC) / CORE_CLKS",
+        "MetricGroup": "PortsUtil;TopdownL4;tma_ports_utilization_group",
+        "MetricName": "tma_ports_utilized_2",
+        "PublicDescription": "This metric represents fraction of cycles CPU executed total of 2 uops per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise).  Loop Vectorization -most compilers feature auto-Vectorization options today- reduces pressure on the execution ports as multiple elements are calculated with same uop.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of cycles CPU executed total of 3 or more uops per cycle on all execution ports (Logical Processor cycles since ICL, Physical Core cycles otherwise).",
+        "MetricExpr": "((cpu@UOPS_EXECUTED.CORE\\,cmask\\=3@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC) / CORE_CLKS",
+        "MetricGroup": "PortsUtil;TopdownL4;tma_ports_utilization_group",
+        "MetricName": "tma_ports_utilized_3m",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution ports for ALU operations.",
+        "MetricExpr": "(UOPS_DISPATCHED_PORT.PORT_0 + UOPS_DISPATCHED_PORT.PORT_1 + UOPS_DISPATCHED_PORT.PORT_5) / (3 * CORE_CLKS)",
+        "MetricGroup": "TopdownL5;tma_ports_utilized_3m_group",
+        "MetricName": "tma_alu_op_utilization",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port 0 ([SNB+] ALU; [HSW+] ALU and 2nd branch) Sample with: UOPS_DISPATCHED_PORT.PORT_0",
+        "MetricExpr": "UOPS_DISPATCHED_PORT.PORT_0 / CORE_CLKS",
+        "MetricGroup": "Compute;TopdownL6;tma_alu_op_utilization_group",
+        "MetricName": "tma_port_0",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port 1 (ALU) Sample with: UOPS_DISPATCHED_PORT.PORT_1",
+        "MetricExpr": "UOPS_DISPATCHED_PORT.PORT_1 / CORE_CLKS",
+        "MetricGroup": "TopdownL6;tma_alu_op_utilization_group",
+        "MetricName": "tma_port_1",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port 5 ([SNB+] Branches and ALU; [HSW+] ALU) Sample with: UOPS_DISPATCHED.PORT_5",
+        "MetricExpr": "UOPS_DISPATCHED_PORT.PORT_5 / CORE_CLKS",
+        "MetricGroup": "TopdownL6;tma_alu_op_utilization_group",
+        "MetricName": "tma_port_5",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port for Load operations Sample with: UOPS_DISPATCHED.PORT_2_3",
+        "MetricExpr": "(UOPS_DISPATCHED_PORT.PORT_2 + UOPS_DISPATCHED_PORT.PORT_3 - UOPS_DISPATCHED_PORT.PORT_4) / (2 * CORE_CLKS)",
+        "MetricGroup": "TopdownL5;tma_ports_utilized_3m_group",
+        "MetricName": "tma_load_op_utilization",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port 2 ([SNB+]Loads and Store-address; [ICL+] Loads) Sample with: UOPS_DISPATCHED_PORT.PORT_2",
+        "MetricExpr": "UOPS_DISPATCHED_PORT.PORT_2 / CORE_CLKS",
+        "MetricGroup": "TopdownL6;tma_load_op_utilization_group",
+        "MetricName": "tma_port_2",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port 3 ([SNB+]Loads and Store-address; [ICL+] Loads) Sample with: UOPS_DISPATCHED_PORT.PORT_3",
+        "MetricExpr": "UOPS_DISPATCHED_PORT.PORT_3 / CORE_CLKS",
+        "MetricGroup": "TopdownL6;tma_load_op_utilization_group",
+        "MetricName": "tma_port_3",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port for Store operations",
+        "MetricExpr": "UOPS_DISPATCHED_PORT.PORT_4 / CORE_CLKS",
+        "MetricGroup": "TopdownL5;tma_ports_utilized_3m_group",
+        "MetricName": "tma_store_op_utilization",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents Core fraction of cycles CPU dispatched uops on execution port 4 (Store-data) Sample with: UOPS_DISPATCHED_PORT.PORT_4",
+        "MetricExpr": "UOPS_DISPATCHED_PORT.PORT_4 / CORE_CLKS",
+        "MetricGroup": "TopdownL6;tma_store_op_utilization_group",
+        "MetricName": "tma_port_4",
+        "ScaleUnit": "100%"
     },
     {
         "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired",
-        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * CPU_CLK_UNHALTED.THREAD)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Retiring",
-        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum Pipeline_Width throughput was achieved.  Maximizing Retiring typically increases the Instructions-per-cycle (see IPC metric). Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Heavy-operations or Microcode Assists are categorized under Retiring. They often indicate suboptimal performance and can often be optimized or avoided. "
+        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / SLOTS",
+        "MetricGroup": "TopdownL1;tma_L1_group",
+        "MetricName": "tma_retiring",
+        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum Pipeline_Width throughput was achieved.  Maximizing Retiring typically increases the Instructions-per-cycle (see IPC metric). Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Heavy-operations or Microcode Assists are categorized under Retiring. They often indicate suboptimal performance and can often be optimized or avoided.  Sample with: UOPS_RETIRED.RETIRE_SLOTS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of slots where the CPU was retiring light-weight operations -- instructions that require no more than one uop (micro-operation)",
+        "MetricExpr": "tma_retiring - tma_heavy_operations",
+        "MetricGroup": "Retire;TopdownL2;tma_L2_group;tma_retiring_group",
+        "MetricName": "tma_light_operations",
+        "PublicDescription": "This metric represents fraction of slots where the CPU was retiring light-weight operations -- instructions that require no more than one uop (micro-operation). This correlates with total number of instructions used by the program. A uops-per-instruction (see UPI metric) ratio of 1 or less should be expected for decently optimized software running on Intel Core/Xeon products. While this often indicates efficient X86 instructions were executed; high value does not necessarily mean better performance cannot be achieved. Sample with: INST_RETIRED.PREC_DIST",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents overall arithmetic floating-point (FP) operations fraction the CPU has executed (retired)",
+        "MetricExpr": "tma_x87_use + tma_fp_scalar + tma_fp_vector",
+        "MetricGroup": "HPC;TopdownL3;tma_light_operations_group",
+        "MetricName": "tma_fp_arith",
+        "PublicDescription": "This metric represents overall arithmetic floating-point (FP) operations fraction the CPU has executed (retired). Note this metric's value may exceed its parent due to use of \"Uops\" CountDomain and FMA double-counting.",
+        "ScaleUnit": "100%"
     },
     {
-        "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Retiring_SMT",
-        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum Pipeline_Width throughput was achieved.  Maximizing Retiring typically increases the Instructions-per-cycle (see IPC metric). Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Heavy-operations or Microcode Assists are categorized under Retiring. They often indicate suboptimal performance and can often be optimized or avoided. SMT version; use when SMT is enabled and measuring per logical CPU."
+        "BriefDescription": "This metric serves as an approximation of legacy x87 usage",
+        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS * FP_COMP_OPS_EXE.X87 / UOPS_EXECUTED.THREAD",
+        "MetricGroup": "Compute;TopdownL4;tma_fp_arith_group",
+        "MetricName": "tma_x87_use",
+        "PublicDescription": "This metric serves as an approximation of legacy x87 usage. It accounts for instructions beyond X87 FP arithmetic operations; hence may be used as a thermometer to avoid X87 high usage and preferably upgrade to modern ISA. See Tip under Tuning Hint.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric approximates arithmetic floating-point (FP) scalar uops fraction the CPU has retired",
+        "MetricExpr": "(FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE) / UOPS_EXECUTED.THREAD",
+        "MetricGroup": "Compute;Flops;TopdownL4;tma_fp_arith_group",
+        "MetricName": "tma_fp_scalar",
+        "PublicDescription": "This metric approximates arithmetic floating-point (FP) scalar uops fraction the CPU has retired. May overcount due to FMA double counting.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric approximates arithmetic floating-point (FP) vector uops fraction the CPU has retired aggregated across all vector widths",
+        "MetricExpr": "(FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE) / UOPS_EXECUTED.THREAD",
+        "MetricGroup": "Compute;Flops;TopdownL4;tma_fp_arith_group",
+        "MetricName": "tma_fp_vector",
+        "PublicDescription": "This metric approximates arithmetic floating-point (FP) vector uops fraction the CPU has retired aggregated across all vector widths. May overcount due to FMA double counting.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of slots where the CPU was retiring heavy-weight operations -- instructions that require two or more uops or microcoded sequences",
+        "MetricExpr": "tma_microcode_sequencer",
+        "MetricGroup": "Retire;TopdownL2;tma_L2_group;tma_retiring_group",
+        "MetricName": "tma_heavy_operations",
+        "PublicDescription": "This metric represents fraction of slots where the CPU was retiring heavy-weight operations -- instructions that require two or more uops or microcoded sequences. This highly-correlates with the uop length of these instructions/sequences.",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric represents fraction of slots the CPU was retiring uops fetched by the Microcode Sequencer (MS) unit",
+        "MetricExpr": "(UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) * IDQ.MS_UOPS / SLOTS",
+        "MetricGroup": "MicroSeq;TopdownL3;tma_heavy_operations_group",
+        "MetricName": "tma_microcode_sequencer",
+        "PublicDescription": "This metric represents fraction of slots the CPU was retiring uops fetched by the Microcode Sequencer (MS) unit.  The MS is used for CISC instructions not supported by the default decoders (like repeat move strings; or CPUID); or by microcode assists used to address some operation modes (like in Floating Point assists). These cases can often be avoided. Sample with: IDQ.MS_UOPS",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of slots the CPU retired uops delivered by the Microcode_Sequencer as a result of Assists",
+        "MetricExpr": "100 * OTHER_ASSISTS.ANY_WB_ASSIST / SLOTS",
+        "MetricGroup": "TopdownL4;tma_microcode_sequencer_group",
+        "MetricName": "tma_assists",
+        "PublicDescription": "This metric estimates fraction of slots the CPU retired uops delivered by the Microcode_Sequencer as a result of Assists. Assists are long sequences of uops that are required in certain corner-cases for operations that cannot be handled natively by the execution pipeline. For example; when working with very small floating point values (so-called Denormals); the FP units are not set up to perform these operations natively. Instead; a sequence of instructions to perform the computation on the Denormals is injected into the pipeline. Since these microcode sequences might be dozens of uops long; Assists can be extremely deleterious to performance and they can be avoided in many cases. Sample with: OTHER_ASSISTS.ANY",
+        "ScaleUnit": "100%"
+    },
+    {
+        "BriefDescription": "This metric estimates fraction of cycles the CPU retired uops originated from CISC (complex instruction set computer) instruction",
+        "MetricExpr": "max(0, tma_microcode_sequencer - tma_assists)",
+        "MetricGroup": "TopdownL4;tma_microcode_sequencer_group",
+        "MetricName": "tma_cisc",
+        "PublicDescription": "This metric estimates fraction of cycles the CPU retired uops originated from CISC (complex instruction set computer) instruction. A CISC instruction has multiple uops that are required to perform the instruction's functionality as in the case of read-modify-write as an example. Since these instructions require multiple uops they may or may not imply sub-optimal use of machine resources.",
+        "ScaleUnit": "100%"
     },
     {
         "BriefDescription": "Instructions Per Cycle (per Logical Processor)",
-        "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
+        "MetricExpr": "INST_RETIRED.ANY / CLKS",
         "MetricGroup": "Ret;Summary",
         "MetricName": "IPC"
     },
@@ -76,8 +536,8 @@
     },
     {
         "BriefDescription": "Cycles Per Instruction (per Logical Processor)",
-        "MetricExpr": "1 / (INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD)",
-        "MetricGroup": "Pipeline;Mem",
+        "MetricExpr": "1 / IPC",
+        "MetricGroup": "Mem;Pipeline",
         "MetricName": "CPI"
     },
     {
@@ -88,16 +548,10 @@
     },
     {
         "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
-        "MetricExpr": "4 * CPU_CLK_UNHALTED.THREAD",
-        "MetricGroup": "TmaL1",
+        "MetricExpr": "4 * CORE_CLKS",
+        "MetricGroup": "tma_L1_group",
         "MetricName": "SLOTS"
     },
-    {
-        "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
-        "MetricExpr": "4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "TmaL1_SMT",
-        "MetricName": "SLOTS_SMT"
-    },
     {
         "BriefDescription": "The ratio of Executed- by Issued-Uops",
         "MetricExpr": "UOPS_EXECUTED.THREAD / UOPS_ISSUED.ANY",
@@ -107,37 +561,25 @@
     },
     {
         "BriefDescription": "Instructions Per Cycle across hyper-threads (per physical core)",
-        "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
-        "MetricGroup": "Ret;SMT;TmaL1",
+        "MetricExpr": "INST_RETIRED.ANY / CORE_CLKS",
+        "MetricGroup": "Ret;SMT;tma_L1_group",
         "MetricName": "CoreIPC"
     },
-    {
-        "BriefDescription": "Instructions Per Cycle across hyper-threads (per physical core)",
-        "MetricExpr": "INST_RETIRED.ANY / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "Ret;SMT;TmaL1_SMT",
-        "MetricName": "CoreIPC_SMT"
-    },
     {
         "BriefDescription": "Floating Point Operations Per Cycle",
-        "MetricExpr": "( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE ) / CPU_CLK_UNHALTED.THREAD",
-        "MetricGroup": "Ret;Flops",
+        "MetricExpr": "(1 * (FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * (FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE) + 8 * SIMD_FP_256.PACKED_SINGLE) / CORE_CLKS",
+        "MetricGroup": "Flops;Ret",
         "MetricName": "FLOPc"
     },
-    {
-        "BriefDescription": "Floating Point Operations Per Cycle",
-        "MetricExpr": "( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "Ret;Flops_SMT",
-        "MetricName": "FLOPc_SMT"
-    },
     {
         "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is execution) per-core",
-        "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)",
+        "MetricExpr": "UOPS_EXECUTED.THREAD / ((cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)",
         "MetricGroup": "Backend;Cor;Pipeline;PortsUtil",
         "MetricName": "ILP"
     },
     {
         "BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core",
-        "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+        "MetricExpr": "((CPU_CLK_UNHALTED.THREAD / 2) * (1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK)) if #core_wide < 1 else (CPU_CLK_UNHALTED.THREAD_ANY / 2) if #SMT_on else CLKS",
         "MetricGroup": "SMT",
         "MetricName": "CORE_CLKS"
     },
@@ -179,15 +621,15 @@
     },
     {
         "BriefDescription": "Instructions per FP Arithmetic instruction (lower number means higher occurrence rate)",
-        "MetricExpr": "1 / ( ((FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE) / UOPS_EXECUTED.THREAD) + ((FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE) / UOPS_EXECUTED.THREAD) )",
+        "MetricExpr": "1 / (tma_fp_scalar + tma_fp_vector)",
         "MetricGroup": "Flops;InsType",
         "MetricName": "IpArith",
         "PublicDescription": "Instructions per FP Arithmetic instruction (lower number means higher occurrence rate). May undercount due to FMA double counting. Approximated prior to BDW."
     },
     {
-        "BriefDescription": "Total number of retired Instructions, Sample with: INST_RETIRED.PREC_DIST",
+        "BriefDescription": "Total number of retired Instructions Sample with: INST_RETIRED.PREC_DIST",
         "MetricExpr": "INST_RETIRED.ANY",
-        "MetricGroup": "Summary;TmaL1",
+        "MetricGroup": "Summary;tma_L1_group",
         "MetricName": "Instructions"
     },
     {
@@ -204,7 +646,7 @@
     },
     {
         "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
-        "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )",
+        "MetricExpr": "IDQ.DSB_UOPS / ((IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS))",
         "MetricGroup": "DSB;Fed;FetchBW",
         "MetricName": "DSB_Coverage"
     },
@@ -216,47 +658,41 @@
     },
     {
         "BriefDescription": "Actual Average Latency for L1 data-cache miss demand load operations (in core cycles)",
-        "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb )",
+        "MetricExpr": "L1D_PEND_MISS.PENDING / (MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb)",
         "MetricGroup": "Mem;MemoryBound;MemoryLat",
         "MetricName": "Load_Miss_Real_Latency"
     },
     {
         "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-Logical Processor)",
         "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES",
-        "MetricGroup": "Mem;MemoryBound;MemoryBW",
+        "MetricGroup": "Mem;MemoryBW;MemoryBound",
         "MetricName": "MLP"
     },
     {
         "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Mem;CacheMisses",
+        "MetricGroup": "CacheMisses;Mem",
         "MetricName": "L1MPKI"
     },
     {
         "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Mem;Backend;CacheMisses",
+        "MetricGroup": "Backend;CacheMisses;Mem",
         "MetricName": "L2MPKI"
     },
     {
         "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.LLC_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Mem;CacheMisses",
+        "MetricGroup": "CacheMisses;Mem",
         "MetricName": "L3MPKI"
     },
     {
         "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
         "MetricConstraint": "NO_NMI_WATCHDOG",
-        "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / CPU_CLK_UNHALTED.THREAD",
+        "MetricExpr": "(ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION) / CORE_CLKS",
         "MetricGroup": "Mem;MemoryTLB",
         "MetricName": "Page_Walks_Utilization"
     },
-    {
-        "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
-        "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "Mem;MemoryTLB_SMT",
-        "MetricName": "Page_Walks_Utilization_SMT"
-    },
     {
         "BriefDescription": "Average per-core data fill bandwidth to the L1 data cache [GB / sec]",
         "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
@@ -277,19 +713,19 @@
     },
     {
         "BriefDescription": "Average per-thread data fill bandwidth to the L1 data cache [GB / sec]",
-        "MetricExpr": "(64 * L1D.REPLACEMENT / 1000000000 / duration_time)",
+        "MetricExpr": "L1D_Cache_Fill_BW",
         "MetricGroup": "Mem;MemoryBW",
         "MetricName": "L1D_Cache_Fill_BW_1T"
     },
     {
         "BriefDescription": "Average per-thread data fill bandwidth to the L2 cache [GB / sec]",
-        "MetricExpr": "(64 * L2_LINES_IN.ALL / 1000000000 / duration_time)",
+        "MetricExpr": "L2_Cache_Fill_BW",
         "MetricGroup": "Mem;MemoryBW",
         "MetricName": "L2_Cache_Fill_BW_1T"
     },
     {
         "BriefDescription": "Average per-thread data fill bandwidth to the L3 cache [GB / sec]",
-        "MetricExpr": "(64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time)",
+        "MetricExpr": "L3_Cache_Fill_BW",
         "MetricGroup": "Mem;MemoryBW",
         "MetricName": "L3_Cache_Fill_BW_1T"
     },
@@ -307,26 +743,26 @@
     },
     {
         "BriefDescription": "Measured Average Frequency for unhalted processors [GHz]",
-        "MetricExpr": "(CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time",
-        "MetricGroup": "Summary;Power",
+        "MetricExpr": "Turbo_Utilization * msr@tsc@ / 1000000000 / duration_time",
+        "MetricGroup": "Power;Summary",
         "MetricName": "Average_Frequency"
     },
     {
         "BriefDescription": "Giga Floating Point Operations Per Second",
-        "MetricExpr": "( ( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE ) / 1000000000 ) / duration_time",
+        "MetricExpr": "((1 * (FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * (FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE) + 8 * SIMD_FP_256.PACKED_SINGLE) / 1000000000) / duration_time",
         "MetricGroup": "Cor;Flops;HPC",
         "MetricName": "GFLOPs",
         "PublicDescription": "Giga Floating Point Operations Per Second. Aggregate across all supported options of: FP precisions, scalar and vector instructions, vector-width and AMX engine."
     },
     {
         "BriefDescription": "Average Frequency Utilization relative nominal frequency",
-        "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricExpr": "CLKS / CPU_CLK_UNHALTED.REF_TSC",
         "MetricGroup": "Power",
         "MetricName": "Turbo_Utilization"
     },
     {
         "BriefDescription": "Fraction of cycles where both hardware Logical Processors were active",
-        "MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0",
+        "MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / (CPU_CLK_UNHALTED.REF_XCLK_ANY / 2) if #SMT_on else 0",
         "MetricGroup": "SMT",
         "MetricName": "SMT_2T_Utilization"
     },
@@ -344,7 +780,7 @@
     },
     {
         "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]",
-        "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time",
+        "MetricExpr": "(64 * (uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@) / 1000000000) / duration_time",
         "MetricGroup": "HPC;Mem;MemoryBW;SoC",
         "MetricName": "DRAM_BW_Use"
     },
@@ -354,12 +790,6 @@
         "MetricGroup": "SoC",
         "MetricName": "Socket_CLKS"
     },
-    {
-        "BriefDescription": "Uncore frequency per die [GHZ]",
-        "MetricExpr": "cbox_0@event\\=0x0@ / #num_dies / duration_time / 1000000000",
-        "MetricGroup": "SoC",
-        "MetricName": "UNCORE_FREQ"
-    },
     {
         "BriefDescription": "Instructions per Far Branch ( Far Branches apply upon transition from application to operating system, handling interrupts, exceptions) [lower number means higher occurrence rate]",
         "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.FAR_BRANCH:u",
@@ -407,5 +837,11 @@
         "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100",
         "MetricGroup": "Power",
         "MetricName": "C7_Pkg_Residency"
+    },
+    {
+        "BriefDescription": "Uncore frequency per die [GHZ]",
+        "MetricExpr": "Socket_CLKS / #num_dies / duration_time / 1000000000",
+        "MetricGroup": "SoC",
+        "MetricName": "UNCORE_FREQ"
     }
 ]
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
index 93e07385eeec..c118ff54c30e 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-cache.json
@@ -61,7 +61,7 @@
         "EventCode": "0x34",
         "EventName": "UNC_C_LLC_LOOKUP.WRITE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2.  This has numerous filters available.  Note the non-standard filtering equation.  This event will count requests that lookup the cache multiple times with multiple increments.  One must ALWAYS set filter mask bit 0 and select a state or states to match.  Otherwise, the event will count nothing.   CBoGlCtrl[22:17] bits correspond to [M'FMESI] state.; Writeback transactions from L2 to the LLC  This includes all write transactions -- both Cachable and UC.",
+        "PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2.  This has numerous filters available.  Note the non-standard filtering equation.  This event will count requests that lookup the cache multiple times with multiple increments.  One must ALWAYS set filter mask bit 0 and select a state or states to match.  Otherwise, the event will count nothing.   CBoGlCtrl[22:17] bits correspond to [M'FMESI] state.; Writeback transactions from L2 to the LLC  This includes all write transactions -- both Cacheable and UC.",
         "UMask": "0x5",
         "Unit": "CBO"
     },
@@ -999,7 +999,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.ALL",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions inserted into the TOR.    This includes requests that reside in the TOR for a short time, such as LLC Hits that do not need to snoop cores or requests that get rejected and have to be retried through one of the ingress queues.  The TOR is more commonly a bottleneck in skews with smaller core counts, where the ratio of RTIDs to TOR entries is larger.  Note that there are reserved TOR entries for various request types, so it is possible that a given request type be blocked with an occupancy that is less than 20.  Also note that generally requests will not be able to arbitrate into the TOR pipeline if there are no available TOR slots.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions inserted into the TOR.    This includes requests that reside in the TOR for a short time, such as LLC Hits that do not need to snoop cores or requests that get rejected and have to be retried through one of the ingress queues.  The TOR is more commonly a bottleneck in skews with smaller core counts, where the ratio of RTIDs to TOR entries is larger.  Note that there are reserved TOR entries for various request types, so it is possible that a given request type be blocked with an occupancy that is less than 20.  Also note that generally requests will not be able to arbitrate into the TOR pipeline if there are no available TOR slots.",
         "UMask": "0x8",
         "Unit": "CBO"
     },
@@ -1009,7 +1009,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.EVICTION",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Eviction transactions inserted into the TOR.  Evictions can be quick, such as when the line is in the F, S, or E states and no core valid bits are set.  They can also be longer if either CV bits are set (so the cores need to be snooped) and/or if there is a HitM (in which case it is necessary to write the request out to memory).",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Eviction transactions inserted into the TOR.  Evictions can be quick, such as when the line is in the F, S, or E states and no core valid bits are set.  They can also be longer if either CV bits are set (so the cores need to be snooped) and/or if there is a HitM (in which case it is necessary to write the request out to memory).",
         "UMask": "0x4",
         "Unit": "CBO"
     },
@@ -1019,7 +1019,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.LOCAL",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions inserted into the TOR that are satisifed by locally HOMed memory.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions inserted into the TOR that are satisfied by locally HOMed memory.",
         "UMask": "0x28",
         "Unit": "CBO"
     },
@@ -1029,7 +1029,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.LOCAL_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions, satisifed by an opcode,  inserted into the TOR that are satisifed by locally HOMed memory.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions, satisfied by an opcode,  inserted into the TOR that are satisfied by locally HOMed memory.",
         "UMask": "0x21",
         "Unit": "CBO"
     },
@@ -1039,7 +1039,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions inserted into the TOR that are satisifed by locally HOMed memory.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by locally HOMed memory.",
         "UMask": "0x2A",
         "Unit": "CBO"
     },
@@ -1049,7 +1049,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
         "UMask": "0x23",
         "Unit": "CBO"
     },
@@ -1059,7 +1059,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.MISS_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
         "UMask": "0x3",
         "Unit": "CBO"
     },
@@ -1069,7 +1069,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions inserted into the TOR that are satisifed by remote caches or remote memory.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
         "UMask": "0x8A",
         "Unit": "CBO"
     },
@@ -1079,7 +1079,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions, satisifed by an opcode,  inserted into the TOR that are satisifed by remote caches or remote memory.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions, satisfied by an opcode,  inserted into the TOR that are satisfied by remote caches or remote memory.",
         "UMask": "0x83",
         "Unit": "CBO"
     },
@@ -1089,7 +1089,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.NID_ALL",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR.  The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid.  In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR.  The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid.  In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
         "UMask": "0x48",
         "Unit": "CBO"
     },
@@ -1099,7 +1099,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.NID_EVICTION",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
         "UMask": "0x44",
         "Unit": "CBO"
     },
@@ -1109,7 +1109,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.NID_MISS_ALL",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
         "UMask": "0x4A",
         "Unit": "CBO"
     },
@@ -1119,7 +1119,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.NID_MISS_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
         "UMask": "0x43",
         "Unit": "CBO"
     },
@@ -1129,7 +1129,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.NID_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
         "UMask": "0x41",
         "Unit": "CBO"
     },
@@ -1139,7 +1139,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.NID_WB",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; NID matched write transactions inserted into the TOR.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; NID matched write transactions inserted into the TOR.",
         "UMask": "0x50",
         "Unit": "CBO"
     },
@@ -1149,7 +1149,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
         "UMask": "0x1",
         "Unit": "CBO"
     },
@@ -1159,7 +1159,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.REMOTE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions inserted into the TOR that are satisifed by remote caches or remote memory.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
         "UMask": "0x88",
         "Unit": "CBO"
     },
@@ -1169,7 +1169,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.REMOTE_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions, satisifed by an opcode,  inserted into the TOR that are satisifed by remote caches or remote memory.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; All transactions, satisfied by an opcode,  inserted into the TOR that are satisfied by remote caches or remote memory.",
         "UMask": "0x81",
         "Unit": "CBO"
     },
@@ -1179,7 +1179,7 @@
         "EventCode": "0x35",
         "EventName": "UNC_C_TOR_INSERTS.WB",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Write transactions inserted into the TOR.   This does not include RFO, but actual operations that contain data being sent from the core.",
+        "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match  qualifications specified by the subevent.  There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc  to DRD (0x182).; Write transactions inserted into the TOR.   This does not include RFO, but actual operations that contain data being sent from the core.",
         "UMask": "0x10",
         "Unit": "CBO"
     },
@@ -1215,7 +1215,7 @@
         "EventCode": "0x36",
         "EventName": "UNC_C_TOR_OCCUPANCY.LOCAL_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent.   There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding  transactions, satisifed by an opcode,  in the TOR that are satisifed by locally HOMed memory.",
+        "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent.   There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding  transactions, satisfied by an opcode,  in the TOR that are satisfied by locally HOMed memory.",
         "UMask": "0x21",
         "Unit": "CBO"
     },
@@ -1242,7 +1242,7 @@
         "EventCode": "0x36",
         "EventName": "UNC_C_TOR_OCCUPANCY.MISS_LOCAL_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent.   There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
+        "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent.   There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
         "UMask": "0x23",
         "Unit": "CBO"
     },
@@ -1269,7 +1269,7 @@
         "EventCode": "0x36",
         "EventName": "UNC_C_TOR_OCCUPANCY.MISS_REMOTE_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent.   There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
+        "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent.   There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
         "UMask": "0x83",
         "Unit": "CBO"
     },
@@ -1350,7 +1350,7 @@
         "EventCode": "0x36",
         "EventName": "UNC_C_TOR_OCCUPANCY.REMOTE_OPCODE",
         "PerPkg": "1",
-        "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent.   There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding  transactions, satisifed by an opcode,  in the TOR that are satisifed by remote caches or remote memory.",
+        "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent.   There are a number of subevent 'filters' but only a subset of the subevent combinations are valid.  Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set.  If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding  transactions, satisfied by an opcode,  in the TOR that are satisfied by remote caches or remote memory.",
         "UMask": "0x81",
         "Unit": "CBO"
     },
@@ -1446,7 +1446,7 @@
         "EventCode": "0x2",
         "EventName": "UNC_C_TxR_INSERTS.BL_CORE",
         "PerPkg": "1",
-        "PublicDescription": "Number of allocations into the Cbo Egress.  The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the BL ring.  This is commonly used for transfering writeback data to the cache.",
+        "PublicDescription": "Number of allocations into the Cbo Egress.  The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the BL ring.  This is commonly used for transferring writeback data to the cache.",
         "UMask": "0x40",
         "Unit": "CBO"
     },
@@ -1692,7 +1692,7 @@
         "EventCode": "0xb",
         "EventName": "UNC_H_CONFLICT_CYCLES.LAST",
         "PerPkg": "1",
-        "PublicDescription": "Count every last conflictor in conflict chain. Can be used to compute the average conflict chain length as (#Ackcnflts/#LastConflictor)+1. This can be used to give a feel for the conflict chain lenghts while analyzing lock kernels.",
+        "PublicDescription": "Count every last conflictor in conflict chain. Can be used to compute the average conflict chain length as (#Ackcnflts/#LastConflictor)+1. This can be used to give a feel for the conflict chain lengths while analyzing lock kernels.",
         "UMask": "0x4",
         "Unit": "HA"
     },
@@ -1729,7 +1729,7 @@
         "EventCode": "0x41",
         "EventName": "UNC_H_DIRECTORY_LAT_OPT",
         "PerPkg": "1",
-        "PublicDescription": "Directory Latency Optimization Data Return Path Taken. When directory mode is enabled and the directory retuned for a read is Dir=I, then data can be returned using a faster path if certain conditions are met (credits, free pipeline, etc).",
+        "PublicDescription": "Directory Latency Optimization Data Return Path Taken. When directory mode is enabled and the directory returned for a read is Dir=I, then data can be returned using a faster path if certain conditions are met (credits, free pipeline, etc).",
         "Unit": "HA"
     },
     {
@@ -2686,7 +2686,7 @@
         "EventCode": "0x21",
         "EventName": "UNC_H_SNOOP_RESP.RSPSFWD",
         "PerPkg": "1",
-        "PublicDescription": "Counts the total number of RspI snoop responses received.  Whenever a snoops are issued, one or more snoop responses will be returned depending on the topology of the system.   In systems larger than 2s, when multiple snoops are returned this will count all the snoops that are received.  For example, if 3 snoops were issued and returned RspI, RspS, and RspSFwd; then each of these sub-events would increment by 1.; Filters for a snoop response of RspSFwd.  This is returned when a remote caching agent forwards data but holds on to its currentl copy.  This is common for data and code reads that hit in a remote socket in E or F state.",
+        "PublicDescription": "Counts the total number of RspI snoop responses received.  Whenever a snoops are issued, one or more snoop responses will be returned depending on the topology of the system.   In systems larger than 2s, when multiple snoops are returned this will count all the snoops that are received.  For example, if 3 snoops were issued and returned RspI, RspS, and RspSFwd; then each of these sub-events would increment by 1.; Filters for a snoop response of RspSFwd.  This is returned when a remote caching agent forwards data but holds on to its currently copy.  This is common for data and code reads that hit in a remote socket in E or F state.",
         "UMask": "0x8",
         "Unit": "HA"
     },
@@ -2766,7 +2766,7 @@
         "EventCode": "0x60",
         "EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPSFWD",
         "PerPkg": "1",
-        "PublicDescription": "Number of snoop responses received for a Local  request; Filters for a snoop response of RspSFwd.  This is returned when a remote caching agent forwards data but holds on to its currentl copy.  This is common for data and code reads that hit in a remote socket in E or F state.",
+        "PublicDescription": "Number of snoop responses received for a Local  request; Filters for a snoop response of RspSFwd.  This is returned when a remote caching agent forwards data but holds on to its currently copy.  This is common for data and code reads that hit in a remote socket in E or F state.",
         "UMask": "0x8",
         "Unit": "HA"
     },
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
index b3b1a08d4acf..10ea4afeffc1 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
@@ -24,7 +24,7 @@
         "EventCode": "0x13",
         "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exlusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because there were not enough Egress credits.  Had there been enough credits, the spawn would have worked as the RBT bit was set and the RBT tag matched.",
+        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exclusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because there were not enough Egress credits.  Had there been enough credits, the spawn would have worked as the RBT bit was set and the RBT tag matched.",
         "UMask": "0x2",
         "Unit": "QPI LL"
     },
@@ -34,7 +34,7 @@
         "EventCode": "0x13",
         "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_MISS",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exlusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match and there weren't enough Egress credits.   The valid bit was set.",
+        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exclusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match and there weren't enough Egress credits.   The valid bit was set.",
         "UMask": "0x20",
         "Unit": "QPI LL"
     },
@@ -44,7 +44,7 @@
         "EventCode": "0x13",
         "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_RBT",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exlusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because there were not enough Egress credits AND the RBT bit was not set, but the RBT tag matched.",
+        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exclusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because there were not enough Egress credits AND the RBT bit was not set, but the RBT tag matched.",
         "UMask": "0x8",
         "Unit": "QPI LL"
     },
@@ -54,7 +54,7 @@
         "EventCode": "0x13",
         "EventName": "UNC_Q_DIRECT2CORE.FAILURE_CREDITS_RBT_MISS",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exlusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match, the valid bit was not set and there weren't enough Egress credits.",
+        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exclusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match, the valid bit was not set and there weren't enough Egress credits.",
         "UMask": "0x80",
         "Unit": "QPI LL"
     },
@@ -64,7 +64,7 @@
         "EventCode": "0x13",
         "EventName": "UNC_Q_DIRECT2CORE.FAILURE_MISS",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exlusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match although the valid bit was set and there were enough Egress credits.",
+        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exclusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match although the valid bit was set and there were enough Egress credits.",
         "UMask": "0x10",
         "Unit": "QPI LL"
     },
@@ -74,7 +74,7 @@
         "EventCode": "0x13",
         "EventName": "UNC_Q_DIRECT2CORE.FAILURE_RBT_HIT",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exlusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the route-back table (RBT) specified that the transaction should not trigger a direct2core tranaction.  This is common for IO transactions.  There were enough Egress credits and the RBT tag matched but the valid bit was not set.",
+        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exclusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the route-back table (RBT) specified that the transaction should not trigger a direct2core transaction.  This is common for IO transactions.  There were enough Egress credits and the RBT tag matched but the valid bit was not set.",
         "UMask": "0x4",
         "Unit": "QPI LL"
     },
@@ -84,7 +84,7 @@
         "EventCode": "0x13",
         "EventName": "UNC_Q_DIRECT2CORE.FAILURE_RBT_MISS",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exlusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match and the valid bit was not set although there were enough Egress credits.",
+        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exclusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn failed because the RBT tag did not match and the valid bit was not set although there were enough Egress credits.",
         "UMask": "0x40",
         "Unit": "QPI LL"
     },
@@ -94,7 +94,7 @@
         "EventCode": "0x13",
         "EventName": "UNC_Q_DIRECT2CORE.SUCCESS_RBT_HIT",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exlusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn was successful.  There were sufficient credits, the RBT valid bit was set and there was an RBT tag match.  The message was marked to spawn direct2core.",
+        "PublicDescription": "Counts the number of DRS packets that we attempted to do direct2core on.  There are 4 mutually exclusive filters.  Filter [0] can be used to get successful spawns, while [1:3] provide the different failure cases.  Note that this does not count packets that are not candidates for Direct2Core.  The only candidates for Direct2Core are DRS packets destined for Cbos.; The spawn was successful.  There were sufficient credits, the RBT valid bit was set and there was an RBT tag match.  The message was marked to spawn direct2core.",
         "UMask": "0x1",
         "Unit": "QPI LL"
     },
@@ -131,7 +131,7 @@
         "EventCode": "0x9",
         "EventName": "UNC_Q_RxL_BYPASSED",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of times that an incoming flit was able to bypass the flit buffer and pass directly across the BGF and into the Egress.  This is a latency optimization, and should generally be the common case.  If this value is less than the number of flits transfered, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
+        "PublicDescription": "Counts the number of times that an incoming flit was able to bypass the flit buffer and pass directly across the BGF and into the Egress.  This is a latency optimization, and should generally be the common case.  If this value is less than the number of flits transferred, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
         "Unit": "QPI LL"
     },
     {
@@ -443,7 +443,7 @@
         "EventCode": "0x1",
         "EventName": "UNC_Q_RxL_FLITS_G0.DATA",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of data flitsreceived over QPI.  Each flit contains 64b of data.  This includes both DRS and NCB data flits (coherent and non-coherent).  This can be used to calculate the data bandwidth of the QPI link.  One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits.  This does not include the header flits that go in data packets.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of data flits received over QPI.  Each flit contains 64b of data.  This includes both DRS and NCB data flits (coherent and non-coherent).  This can be used to calculate the data bandwidth of the QPI link.  One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits.  This does not include the header flits that go in data packets.",
         "UMask": "0x2",
         "Unit": "QPI LL"
     },
@@ -453,7 +453,7 @@
         "EventCode": "0x1",
         "EventName": "UNC_Q_RxL_FLITS_G0.IDLE",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of flits received over QPI that do not hold protocol payload.  When QPI is not in a power saving state, it continuously transmits flits across the link.  When there are no protocol flits to send, it will send IDLE and NULL flits  across.  These flits sometimes do carry a payload, such as credit returns, but are generall not considered part of the QPI bandwidth.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of flits received over QPI that do not hold protocol payload.  When QPI is not in a power saving state, it continuously transmits flits across the link.  When there are no protocol flits to send, it will send IDLE and NULL flits  across.  These flits sometimes do carry a payload, such as credit returns, but are generally not considered part of the QPI bandwidth.",
         "UMask": "0x1",
         "Unit": "QPI LL"
     },
@@ -463,7 +463,7 @@
         "EventCode": "0x1",
         "EventName": "UNC_Q_RxL_FLITS_G0.NON_DATA",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of non-NULL non-data flits received across QPI.  This basically tracks the protocol overhead on the QPI link.  One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits.  This includes the header flits for data packets.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of non-NULL non-data flits received across QPI.  This basically tracks the protocol overhead on the QPI link.  One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits.  This includes the header flits for data packets.",
         "UMask": "0x4",
         "Unit": "QPI LL"
     },
@@ -474,7 +474,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G1.DRS",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits received over the NCB channel which transmits non-coherent data.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits received over the NCB channel which transmits non-coherent data.",
         "UMask": "0x18",
         "Unit": "QPI LL"
     },
@@ -485,7 +485,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G1.DRS_DATA",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of data flits received over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits received over the NCB channel which transmits non-coherent data.  This includes only the data flits (not the header).",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of data flits received over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits received over the NCB channel which transmits non-coherent data.  This includes only the data flits (not the header).",
         "UMask": "0x8",
         "Unit": "QPI LL"
     },
@@ -496,7 +496,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G1.DRS_NONDATA",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of protocol flits received over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits received over the NCB channel which transmits non-coherent data.  This includes only the header flits (not the data).  This includes extended headers.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of protocol flits received over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits received over the NCB channel which transmits non-coherent data.  This includes only the header flits (not the data).  This includes extended headers.",
         "UMask": "0x10",
         "Unit": "QPI LL"
     },
@@ -507,7 +507,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G1.HOM",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of flits received over QPI on the home channel.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of flits received over QPI on the home channel.",
         "UMask": "0x6",
         "Unit": "QPI LL"
     },
@@ -518,7 +518,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G1.HOM_NONREQ",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of non-request flits received over QPI on the home channel.  These are most commonly snoop responses, and this event can be used as a proxy for that.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of non-request flits received over QPI on the home channel.  These are most commonly snoop responses, and this event can be used as a proxy for that.",
         "UMask": "0x4",
         "Unit": "QPI LL"
     },
@@ -529,7 +529,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G1.HOM_REQ",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of data request received over QPI on the home channel.  This basically counts the number of remote memory requests received over QPI.  In conjunction with the local read count in the Home Agent, one can calculate the number of LLC Misses.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of data request received over QPI on the home channel.  This basically counts the number of remote memory requests received over QPI.  In conjunction with the local read count in the Home Agent, one can calculate the number of LLC Misses.",
         "UMask": "0x2",
         "Unit": "QPI LL"
     },
@@ -540,7 +540,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G1.SNP",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of snoop request flits received over QPI.  These requests are contained in the snoop channel.  This does not include snoop responses, which are received on the home channel.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of snoop request flits received over QPI.  These requests are contained in the snoop channel.  This does not include snoop responses, which are received on the home channel.",
         "UMask": "0x1",
         "Unit": "QPI LL"
     },
@@ -551,7 +551,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G2.NCB",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass flits.  These packets are generally used to transmit non-coherent data across QPI.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass flits.  These packets are generally used to transmit non-coherent data across QPI.",
         "UMask": "0xC",
         "Unit": "QPI LL"
     },
@@ -562,7 +562,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G2.NCB_DATA",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass data flits.  These flits are generally used to transmit non-coherent data across QPI.  This does not include a count of the DRS (coherent) data flits.  This only counts the data flits, not the NCB headers.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass data flits.  These flits are generally used to transmit non-coherent data across QPI.  This does not include a count of the DRS (coherent) data flits.  This only counts the data flits, not the NCB headers.",
         "UMask": "0x4",
         "Unit": "QPI LL"
     },
@@ -573,7 +573,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G2.NCB_NONDATA",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass non-data flits.  These packets are generally used to transmit non-coherent data across QPI, and the flits counted here are for headers and other non-data flits.  This includes extended headers.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass non-data flits.  These packets are generally used to transmit non-coherent data across QPI, and the flits counted here are for headers and other non-data flits.  This includes extended headers.",
         "UMask": "0x8",
         "Unit": "QPI LL"
     },
@@ -584,7 +584,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G2.NCS",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of NCS (non-coherent standard) flits received over QPI.    This includes extended headers.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of NCS (non-coherent standard) flits received over QPI.    This includes extended headers.",
         "UMask": "0x10",
         "Unit": "QPI LL"
     },
@@ -595,7 +595,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G2.NDR_AD",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over the NDR (Non-Data Response) channel.  This channel is used to send a variety of protocol flits including grants and completions.  This is only for NDR packets to the local socket which use the AK ring.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over the NDR (Non-Data Response) channel.  This channel is used to send a variety of protocol flits including grants and completions.  This is only for NDR packets to the local socket which use the AK ring.",
         "UMask": "0x1",
         "Unit": "QPI LL"
     },
@@ -606,7 +606,7 @@
         "EventName": "UNC_Q_RxL_FLITS_G2.NDR_AK",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over the NDR (Non-Data Response) channel.  This channel is used to send a variety of protocol flits including grants and completions.  This is only for NDR packets destined for Route-thru to a remote socket.",
+        "PublicDescription": "Counts the number of flits received from the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits received over the NDR (Non-Data Response) channel.  This channel is used to send a variety of protocol flits including grants and completions.  This is only for NDR packets destined for Route-thru to a remote socket.",
         "UMask": "0x2",
         "Unit": "QPI LL"
     },
@@ -1227,7 +1227,7 @@
         "Counter": "0,1,2,3",
         "EventName": "UNC_Q_TxL_FLITS_G0.DATA",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of data flits transmitted over QPI.  Each flit contains 64b of data.  This includes both DRS and NCB data flits (coherent and non-coherent).  This can be used to calculate the data bandwidth of the QPI link.  One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits.  This does not include the header flits that go in data packets.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of data flits transmitted over QPI.  Each flit contains 64b of data.  This includes both DRS and NCB data flits (coherent and non-coherent).  This can be used to calculate the data bandwidth of the QPI link.  One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits.  This does not include the header flits that go in data packets.",
         "UMask": "0x2",
         "Unit": "QPI LL"
     },
@@ -1236,7 +1236,7 @@
         "Counter": "0,1,2,3",
         "EventName": "UNC_Q_TxL_FLITS_G0.NON_DATA",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of non-NULL non-data flits transmitted across QPI.  This basically tracks the protocol overhead on the QPI link.  One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits.  This includes the header flits for data packets.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  It includes filters for Idle, protocol, and Data Flits.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time (for L0) or 4B instead of 8B for L0p.; Number of non-NULL non-data flits transmitted across QPI.  This basically tracks the protocol overhead on the QPI link.  One can get a good picture of the QPI-link characteristics by evaluating the protocol flits, data flits, and idle/null flits.  This includes the header flits for data packets.",
         "UMask": "0x4",
         "Unit": "QPI LL"
     },
@@ -1246,7 +1246,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G1.DRS",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.",
         "UMask": "0x18",
         "Unit": "QPI LL"
     },
@@ -1256,7 +1256,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G1.DRS_DATA",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of data flits transmitted over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits transmitted over the NCB channel which transmits non-coherent data.  This includes only the data flits (not the header).",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of data flits transmitted over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits transmitted over the NCB channel which transmits non-coherent data.  This includes only the data flits (not the header).",
         "UMask": "0x8",
         "Unit": "QPI LL"
     },
@@ -1266,7 +1266,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G1.DRS_NONDATA",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of protocol flits transmitted over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits transmitted over the NCB channel which transmits non-coherent data.  This includes only the header flits (not the data).  This includes extended headers.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of protocol flits transmitted over QPI on the DRS (Data Response) channel.  DRS flits are used to transmit data with coherency.  This does not count data flits transmitted over the NCB channel which transmits non-coherent data.  This includes only the header flits (not the data).  This includes extended headers.",
         "UMask": "0x10",
         "Unit": "QPI LL"
     },
@@ -1276,7 +1276,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G1.HOM",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of flits transmitted over QPI on the home channel.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of flits transmitted over QPI on the home channel.",
         "UMask": "0x6",
         "Unit": "QPI LL"
     },
@@ -1286,7 +1286,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G1.HOM_NONREQ",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of non-request flits transmitted over QPI on the home channel.  These are most commonly snoop responses, and this event can be used as a proxy for that.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of non-request flits transmitted over QPI on the home channel.  These are most commonly snoop responses, and this event can be used as a proxy for that.",
         "UMask": "0x4",
         "Unit": "QPI LL"
     },
@@ -1296,7 +1296,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G1.HOM_REQ",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of data request transmitted over QPI on the home channel.  This basically counts the number of remote memory requests transmitted over QPI.  In conjunction with the local read count in the Home Agent, one can calculate the number of LLC Misses.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of data request transmitted over QPI on the home channel.  This basically counts the number of remote memory requests transmitted over QPI.  In conjunction with the local read count in the Home Agent, one can calculate the number of LLC Misses.",
         "UMask": "0x2",
         "Unit": "QPI LL"
     },
@@ -1306,7 +1306,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G1.SNP",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of snoop request flits transmitted over QPI.  These requests are contained in the snoop channel.  This does not include snoop responses, which are transmitted on the home channel.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for SNP, HOM, and DRS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the number of snoop request flits transmitted over QPI.  These requests are contained in the snoop channel.  This does not include snoop responses, which are transmitted on the home channel.",
         "UMask": "0x1",
         "Unit": "QPI LL"
     },
@@ -1317,7 +1317,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G2.NCB",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass flits.  These packets are generally used to transmit non-coherent data across QPI.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass flits.  These packets are generally used to transmit non-coherent data across QPI.",
         "UMask": "0xC",
         "Unit": "QPI LL"
     },
@@ -1328,7 +1328,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G2.NCB_DATA",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass data flits.  These flits are generally used to transmit non-coherent data across QPI.  This does not include a count of the DRS (coherent) data flits.  This only counts the data flits, not te NCB headers.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass data flits.  These flits are generally used to transmit non-coherent data across QPI.  This does not include a count of the DRS (coherent) data flits.  This only counts the data flits, not the NCB headers.",
         "UMask": "0x4",
         "Unit": "QPI LL"
     },
@@ -1339,7 +1339,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G2.NCB_NONDATA",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass non-data flits.  These packets are generally used to transmit non-coherent data across QPI, and the flits counted here are for headers and other non-data flits.  This includes extended headers.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of Non-Coherent Bypass non-data flits.  These packets are generally used to transmit non-coherent data across QPI, and the flits counted here are for headers and other non-data flits.  This includes extended headers.",
         "UMask": "0x8",
         "Unit": "QPI LL"
     },
@@ -1350,7 +1350,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G2.NCS",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of NCS (non-coherent standard) flits transmitted over QPI.    This includes extended headers.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Number of NCS (non-coherent standard) flits transmitted over QPI.    This includes extended headers.",
         "UMask": "0x10",
         "Unit": "QPI LL"
     },
@@ -1361,7 +1361,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G2.NDR_AD",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over the NDR (Non-Data Response) channel.  This channel is used to send a variety of protocol flits including grants and completions.  This is only for NDR packets to the local socket which use the AK ring.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over the NDR (Non-Data Response) channel.  This channel is used to send a variety of protocol flits including grants and completions.  This is only for NDR packets to the local socket which use the AK ring.",
         "UMask": "0x1",
         "Unit": "QPI LL"
     },
@@ -1372,7 +1372,7 @@
         "EventName": "UNC_Q_TxL_FLITS_G2.NDR_AK",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of flits trasmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transfering a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over the NDR (Non-Data Response) channel.  This channel is used to send a variety of protocol flits including grants and completions.  This is only for NDR packets destined for Route-thru to a remote socket.",
+        "PublicDescription": "Counts the number of flits transmitted across the QPI Link.  This is one of three groups that allow us to track flits.  It includes filters for NDR, NCB, and NCS message classes.  Each flit is made up of 80 bits of information (in addition to some ECC data).  In full-width (L0) mode, flits are made up of four fits, each of which contains 20 bits of data (along with some additional ECC data).   In half-width (L0p) mode, the fits are only 10 bits, and therefore it takes twice as many fits to transmit a flit.  When one talks about QPI speed (for example, 8.0 GT/s), the transfers here refer to fits.  Therefore, in L0, the system will transfer 1 flit at the rate of 1/4th the QPI speed.  One can calculate the bandwidth of the link by taking: flits*80b/time.  Note that this is not the same as data bandwidth.  For example, when we are transferring a 64B cacheline across QPI, we will break it into 9 flits -- 1 with header information and 8 with 64 bits of actual data and an additional 16 bits of other information.  To calculate data bandwidth, one should therefore do: data flits * 8B / time.; Counts the total number of flits transmitted over the NDR (Non-Data Response) channel.  This channel is used to send a variety of protocol flits including grants and completions.  This is only for NDR packets destined for Route-thru to a remote socket.",
         "UMask": "0x2",
         "Unit": "QPI LL"
     },
@@ -1511,7 +1511,7 @@
         "EventName": "UNC_Q_TxR_AD_SNP_CREDIT_OCCUPANCY.VN0",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle.  Flow Control FIFO fro Snoop messages on AD.",
+        "PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle.  Flow Control FIFO for Snoop messages on AD.",
         "UMask": "0x1",
         "Unit": "QPI LL"
     },
@@ -1522,7 +1522,7 @@
         "EventName": "UNC_Q_TxR_AD_SNP_CREDIT_OCCUPANCY.VN1",
         "ExtSel": "1",
         "PerPkg": "1",
-        "PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle.  Flow Control FIFO fro Snoop messages on AD.",
+        "PublicDescription": "Occupancy event that tracks the number of link layer credits into the R3 (for transactions across the BGF) available in each cycle.  Flow Control FIFO for Snoop messages on AD.",
         "UMask": "0x2",
         "Unit": "QPI LL"
     },
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-memory.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-memory.json
index 63b49b712c62..ed60ebca35cb 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-memory.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-memory.json
@@ -188,7 +188,7 @@
         "EventCode": "0x9",
         "EventName": "UNC_M_ECC_CORRECTABLE_ERRORS",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of ECC errors detected and corrected by the iMC on this channel.  This counter is only useful with ECC DRAM devices.  This count will increment one time for each correction regardless of the number of bits corrected.  The iMC can correct up to 4 bit errors in independent channel mode and 8 bit erros in lockstep mode.",
+        "PublicDescription": "Counts the number of ECC errors detected and corrected by the iMC on this channel.  This counter is only useful with ECC DRAM devices.  This count will increment one time for each correction regardless of the number of bits corrected.  The iMC can correct up to 4 bit errors in independent channel mode and 8 bit errors in lockstep mode.",
         "Unit": "iMC"
     },
     {
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
index af289aa6c98e..6c7ddf642fc3 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-other.json
@@ -2097,7 +2097,7 @@
         "EventCode": "0x33",
         "EventName": "UNC_R3_VNA_CREDITS_ACQUIRED",
         "PerPkg": "1",
-        "PublicDescription": "Number of QPI VNA Credit acquisitions.  This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average lifetime of a credit holder.  VNA credits are used by all message classes in order to communicate across QPI.  If a packet is unable to acquire credits, it will then attempt to use credts from the VN0 pool.  Note that a single packet may require multiple flit buffers (i.e. when data is being transfered).  Therefore, this event will increment by the number of credits acquired in each cycle.  Filtering based on message class is not provided.  One can count the number of packets transfered in a given message class using an qfclk event.",
+        "PublicDescription": "Number of QPI VNA Credit acquisitions.  This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average lifetime of a credit holder.  VNA credits are used by all message classes in order to communicate across QPI.  If a packet is unable to acquire credits, it will then attempt to use credits from the VN0 pool.  Note that a single packet may require multiple flit buffers (i.e. when data is being transferred).  Therefore, this event will increment by the number of credits acquired in each cycle.  Filtering based on message class is not provided.  One can count the number of packets transferred in a given message class using an qfclk event.",
         "Unit": "R3QPI"
     },
     {
@@ -2106,7 +2106,7 @@
         "EventCode": "0x33",
         "EventName": "UNC_R3_VNA_CREDITS_ACQUIRED.AD",
         "PerPkg": "1",
-        "PublicDescription": "Number of QPI VNA Credit acquisitions.  This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average lifetime of a credit holder.  VNA credits are used by all message classes in order to communicate across QPI.  If a packet is unable to acquire credits, it will then attempt to use credts from the VN0 pool.  Note that a single packet may require multiple flit buffers (i.e. when data is being transfered).  Therefore, this event will increment by the number of credits acquired in each cycle.  Filtering based on message class is not provided.  One can count the number of packets transfered in a given message class using an qfclk event.; Filter for the Home (HOM) message class.  HOM is generally used to send requests, request responses, and snoop responses.",
+        "PublicDescription": "Number of QPI VNA Credit acquisitions.  This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average lifetime of a credit holder.  VNA credits are used by all message classes in order to communicate across QPI.  If a packet is unable to acquire credits, it will then attempt to use credits from the VN0 pool.  Note that a single packet may require multiple flit buffers (i.e. when data is being transferred).  Therefore, this event will increment by the number of credits acquired in each cycle.  Filtering based on message class is not provided.  One can count the number of packets transferred in a given message class using an qfclk event.; Filter for the Home (HOM) message class.  HOM is generally used to send requests, request responses, and snoop responses.",
         "UMask": "0x1",
         "Unit": "R3QPI"
     },
@@ -2116,7 +2116,7 @@
         "EventCode": "0x33",
         "EventName": "UNC_R3_VNA_CREDITS_ACQUIRED.BL",
         "PerPkg": "1",
-        "PublicDescription": "Number of QPI VNA Credit acquisitions.  This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average lifetime of a credit holder.  VNA credits are used by all message classes in order to communicate across QPI.  If a packet is unable to acquire credits, it will then attempt to use credts from the VN0 pool.  Note that a single packet may require multiple flit buffers (i.e. when data is being transfered).  Therefore, this event will increment by the number of credits acquired in each cycle.  Filtering based on message class is not provided.  One can count the number of packets transfered in a given message class using an qfclk event.; Filter for the Home (HOM) message class.  HOM is generally used to send requests, request responses, and snoop responses.",
+        "PublicDescription": "Number of QPI VNA Credit acquisitions.  This event can be used in conjunction with the VNA In-Use Accumulator to calculate the average lifetime of a credit holder.  VNA credits are used by all message classes in order to communicate across QPI.  If a packet is unable to acquire credits, it will then attempt to use credits from the VN0 pool.  Note that a single packet may require multiple flit buffers (i.e. when data is being transferred).  Therefore, this event will increment by the number of credits acquired in each cycle.  Filtering based on message class is not provided.  One can count the number of packets transferred in a given message class using an qfclk event.; Filter for the Home (HOM) message class.  HOM is generally used to send requests, request responses, and snoop responses.",
         "UMask": "0x4",
         "Unit": "R3QPI"
     },
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
index 0ba63a97ddfa..74c87217d75c 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-power.json
@@ -601,7 +601,7 @@
         "EventCode": "0x80",
         "EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C0",
         "PerPkg": "1",
-        "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State.  It can be used by itself to get the average number of cores in that C-state with threshholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
+        "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State.  It can be used by itself to get the average number of cores in that C-state with thresholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
         "Unit": "PCU"
     },
     {
@@ -610,7 +610,7 @@
         "EventCode": "0x80",
         "EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C3",
         "PerPkg": "1",
-        "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State.  It can be used by itself to get the average number of cores in that C-state with threshholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
+        "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State.  It can be used by itself to get the average number of cores in that C-state with thresholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
         "Unit": "PCU"
     },
     {
@@ -619,7 +619,7 @@
         "EventCode": "0x80",
         "EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C6",
         "PerPkg": "1",
-        "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State.  It can be used by itself to get the average number of cores in that C-state with threshholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
+        "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State.  It can be used by itself to get the average number of cores in that C-state with thresholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
         "Unit": "PCU"
     },
     {
@@ -637,7 +637,7 @@
         "EventCode": "0x9",
         "EventName": "UNC_P_PROCHOT_INTERNAL_CYCLES",
         "PerPkg": "1",
-        "PublicDescription": "Counts the number of cycles that we are in Interal PROCHOT mode.  This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
+        "PublicDescription": "Counts the number of cycles that we are in Internal PROCHOT mode.  This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
         "Unit": "PCU"
     },
     {
diff --git a/tools/perf/pmu-events/arch/x86/mapfile.csv b/tools/perf/pmu-events/arch/x86/mapfile.csv
index 84535179d128..81bd6f5d5354 100644
--- a/tools/perf/pmu-events/arch/x86/mapfile.csv
+++ b/tools/perf/pmu-events/arch/x86/mapfile.csv
@@ -13,7 +13,7 @@ GenuineIntel-6-3F,v26,haswellx,core
 GenuineIntel-6-(7D|7E|A7),v1.15,icelake,core
 GenuineIntel-6-6[AC],v1.16,icelakex,core
 GenuineIntel-6-3A,v22,ivybridge,core
-GenuineIntel-6-3E,v21,ivytown,core
+GenuineIntel-6-3E,v22,ivytown,core
 GenuineIntel-6-2D,v21,jaketown,core
 GenuineIntel-6-(57|85),v9,knightslanding,core
 GenuineIntel-6-AA,v1.00,meteorlake,core
-- 
2.38.0.rc1.362.ged0d419d3c-goog