Re: [PATCH] mtd: rawnand: marvell: Use correct logic for nand-keep-config

[Boris Brezillon]

On Mon, 3 Oct 2022 21:46:31 +0000
Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx> wrote:

> Hi All,
> 
> On 27/09/22 15:47, Chris Packham wrote:
> > From: Tony O'Brien <tony.obrien@xxxxxxxxxxxxxxxxxxx>
> >
> > Originally the absence of the marvell,nand-keep-config property caused
> > the setup_data_interface function to be provided. However when
> > setup_data_interface was moved into nand_controller_ops the logic was
> > unintentionally inverted. Update the logic so that only if the
> > marvell,nand-keep-config property is present the bootloader NAND config
> > kept.
> >
> > Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
> > Signed-off-by: Tony O'Brien <tony.obrien@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>  
> 
> Just following up on this. I know things have probably been busy with 
> the 6.0 release but it's been a week so I figured I'd give this a bump.

Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>

> 
> > ---
> >
> > Notes:
> >      I think this is a bug that's been lurking for 4 years or so. I'm not
> >      sure that's particularly long in the life of an embedded device but it
> >      does make me wonder if there have been other bug reports about it.
> >      
> >      We noticed this because we had a bootloader that used maxed out NAND
> >      timings which made the time it took the kernel to do anything on the
> >      file system longer than we expected.
> >
> >   drivers/mtd/nand/raw/marvell_nand.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
> > index 2455a581fd70..b248c5f657d5 100644
> > --- a/drivers/mtd/nand/raw/marvell_nand.c
> > +++ b/drivers/mtd/nand/raw/marvell_nand.c
> > @@ -2672,7 +2672,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
> >   	chip->controller = &nfc->controller;
> >   	nand_set_flash_node(chip, np);
> >   
> > -	if (!of_property_read_bool(np, "marvell,nand-keep-config"))
> > +	if (of_property_read_bool(np, "marvell,nand-keep-config"))
> >   		chip->options |= NAND_KEEP_TIMINGS;
> >   
> >   	mtd = nand_to_mtd(chip)