[PATCH] arm64: dts: rockchip: rk356x: Fix PCIe register map and ranges

From: Ondrej Jirman
Date: Tue Oct 04 2022 - 10:43:22 EST

I have two Realtek PCIe wifi cards connected over the 4 port
PCIe bridge to Quartz64-A. The cards fail to work, when nvme
SSD is connected at the same time to the bridge. Without nvme
connected, cards work fine. The issue seems to be related
to mixed use of devices which make use of I/O ranges and memory

This mapping is designed to be more straightforward, inspired by
dt-bindings docs for sample pcie3x2 node:

reg = <0x3 0xc0800000 0x0 0x390000>,
<0x0 0xfe280000 0x0 0x10000>,
<0x3 0x80000000 0x0 0x100000>;
ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
<0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;

I noticed that this is crafted so that there doesn't need to be
any translation other than dropping the high dword bits, and I
modified the ranges for pcie2x1 to follow the same principle.

This change to the regs/ranges makes the issue go away and both
nvme and wifi cards work when connected at the same time to the

Signed-off-by: Ondrej Jirman <megi@xxxxxx>
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 319981c3e9f7..e88e8c4fe25b 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -855,7 +855,8 @@ pcie2x1: pcie@fe260000 {
compatible = "rockchip,rk3568-pcie";
reg = <0x3 0xc0000000 0x0 0x00400000>,
<0x0 0xfe260000 0x0 0x00010000>,
- <0x3 0x3f000000 0x0 0x01000000>;
+ <0x3 0x00000000 0x0 0x01000000>;
reg-names = "dbi", "apb", "config";
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
@@ -884,8 +885,8 @@ pcie2x1: pcie@fe260000 {
phys = <&combphy2 PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
power-domains = <&power RK3568_PD_PIPE>;
- ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000
- 0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>;
+ ranges = <0x01000000 0x0 0x01000000 0x3 0x01000000 0x0 0x00100000
+ 0x02000000 0x0 0x02000000 0x3 0x02000000 0x0 0x3e000000>;
resets = <&cru SRST_PCIE20_POWERUP>;
reset-names = "pipe";
#address-cells = <3>;