Re: [PATCH 5.4 00/30] 5.4.216-rc1 review

[Greg Kroah-Hartman]

On Mon, Oct 03, 2022 at 05:49:21PM -0600, Shuah Khan wrote:
> On 10/3/22 01:11, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.216 release.
> > There are 30 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 05 Oct 2022 07:07:06 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.216-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> > -------------
> > Pseudo-Shortlog of commits:
> > 
> > Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> >      Linux 5.4.216-rc1
> > 
> > Florian Fainelli <f.fainelli@xxxxxxxxx>
> >      clk: iproc: Do not rely on node name for correct PLL setup
> > 
> > Han Xu <han.xu@xxxxxxx>
> >      clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks
> > 
> > Wang Yufen <wangyufen@xxxxxxxxxx>
> >      selftests: Fix the if conditions of in test_extra_filter()
> > 
> > Michael Kelley <mikelley@xxxxxxxxxxxxx>
> >      nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
> > 
> > Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
> >      nvme: add new line after variable declatation
> > 
> > Peilin Ye <peilin.ye@xxxxxxxxxxxxx>
> >      usbnet: Fix memory leak in usbnet_disconnect()
> > 
> > Yang Yingliang <yangyingliang@xxxxxxxxxx>
> >      Input: melfas_mip4 - fix return value check in mip4_probe()
> > 
> > Brian Norris <briannorris@xxxxxxxxxxxx>
> >      Revert "drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time"
> > 
> > Samuel Holland <samuel@xxxxxxxxxxxx>
> >      soc: sunxi: sram: Fix debugfs info for A64 SRAM C
> > 
> > Samuel Holland <samuel@xxxxxxxxxxxx>
> >      soc: sunxi: sram: Fix probe function ordering issues
> > 
> > Cai Huoqing <caihuoqing@xxxxxxxxx>
> >      soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()
> > 
> > Samuel Holland <samuel@xxxxxxxxxxxx>
> >      soc: sunxi: sram: Prevent the driver from being unbound
> > 
> > Samuel Holland <samuel@xxxxxxxxxxxx>
> >      soc: sunxi: sram: Actually claim SRAM regions
> > 
> > YuTong Chang <mtwget@xxxxxxxxx>
> >      ARM: dts: am33xx: Fix MMCHS0 dma properties
> > 
> > Faiz Abbas <faiz_abbas@xxxxxx>
> >      ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver
> > 
> > Hangyu Hua <hbh25y@xxxxxxxxx>
> >      media: dvb_vb2: fix possible out of bound access
> > 
> > Minchan Kim <minchan@xxxxxxxxxx>
> >      mm: fix madivse_pageout mishandling on non-LRU page
> > 
> > Alistair Popple <apopple@xxxxxxxxxx>
> >      mm/migrate_device.c: flush TLB while holding PTL
> > 
> > Maurizio Lombardi <mlombard@xxxxxxxxxx>
> >      mm: prevent page_frag_alloc() from corrupting the memory
> > 
> > Mel Gorman <mgorman@xxxxxxxxxxxxxxxxxxx>
> >      mm/page_alloc: fix race condition between build_all_zonelists and page allocation
> > 
> > Sergei Antonov <saproj@xxxxxxxxx>
> >      mmc: moxart: fix 4-bit bus width and remove 8-bit bus width
> > 
> > Niklas Cassel <niklas.cassel@xxxxxxx>
> >      libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
> > 
> > Sasha Levin <sashal@xxxxxxxxxx>
> >      Revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()"
> > 
> > ChenXiaoSong <chenxiaosong2@xxxxxxxxxx>
> >      ntfs: fix BUG_ON in ntfs_lookup_inode_by_name()
> > 
> > Linus Walleij <linus.walleij@xxxxxxxxxx>
> >      ARM: dts: integrator: Tag PCI host with device_type
> > 
> > Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
> >      clk: ingenic-tcu: Properly enable registers before accessing timers
> > 
> > Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> >      net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
> > 
> > Hongling Zeng <zenghongling@xxxxxxxxxx>
> >      uas: ignore UAS for Thinkplus chips
> > 
> > Hongling Zeng <zenghongling@xxxxxxxxxx>
> >      usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
> > 
> > Hongling Zeng <zenghongling@xxxxxxxxxx>
> >      uas: add no-uas quirk for Hiksemi usb_disk
> > 
> > 
> > -------------
> > 
> > Diffstat:
> > 
> >   Makefile                                           |  4 +-
> >   arch/arm/boot/dts/am335x-baltos.dtsi               |  2 +-
> >   arch/arm/boot/dts/am335x-boneblack-common.dtsi     |  1 +
> >   arch/arm/boot/dts/am335x-boneblack-wireless.dts    |  1 -
> >   arch/arm/boot/dts/am335x-boneblue.dts              |  1 -
> >   arch/arm/boot/dts/am335x-bonegreen-wireless.dts    |  1 -
> >   arch/arm/boot/dts/am335x-evm.dts                   |  3 +-
> >   arch/arm/boot/dts/am335x-evmsk.dts                 |  2 +-
> >   arch/arm/boot/dts/am335x-lxm.dts                   |  2 +-
> >   arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi  |  2 +-
> >   arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts     |  2 +-
> >   arch/arm/boot/dts/am335x-pepper.dts                |  4 +-
> >   arch/arm/boot/dts/am335x-phycore-som.dtsi          |  2 +-
> >   arch/arm/boot/dts/am33xx-l4.dtsi                   |  9 +--
> >   arch/arm/boot/dts/am33xx.dtsi                      |  3 +-
> >   arch/arm/boot/dts/am4372.dtsi                      |  3 +-
> >   arch/arm/boot/dts/am437x-cm-t43.dts                |  2 +-
> >   arch/arm/boot/dts/am437x-gp-evm.dts                |  4 +-
> >   arch/arm/boot/dts/am437x-l4.dtsi                   |  5 +-
> >   arch/arm/boot/dts/am437x-sk-evm.dts                |  2 +-
> >   arch/arm/boot/dts/integratorap.dts                 |  1 +
> >   drivers/ata/libata-core.c                          |  4 ++
> >   drivers/clk/bcm/clk-iproc-pll.c                    | 12 ++--
> >   drivers/clk/imx/clk-imx6sx.c                       |  4 +-
> >   drivers/clk/ingenic/tcu.c                          | 15 ++---
> >   drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 -----
> >   drivers/input/touchscreen/melfas_mip4.c            |  2 +-
> >   drivers/media/dvb-core/dvb_vb2.c                   | 11 ++++
> >   drivers/mmc/host/moxart-mmc.c                      | 17 +-----
> >   drivers/net/ethernet/marvell/mvpp2/mvpp2_debugfs.c |  4 +-
> >   drivers/net/usb/qmi_wwan.c                         |  1 +
> >   drivers/net/usb/usbnet.c                           |  7 ++-
> >   drivers/nvme/host/core.c                           |  9 ++-
> >   drivers/soc/sunxi/sunxi_sram.c                     | 27 ++++-----
> >   drivers/usb/storage/unusual_uas.h                  | 21 +++++++
> >   fs/ntfs/super.c                                    |  3 +-
> >   mm/madvise.c                                       |  7 ++-
> >   mm/migrate.c                                       |  5 +-
> >   mm/page_alloc.c                                    | 65 ++++++++++++++++++----
> >   tools/testing/selftests/net/reuseport_bpf.c        |  2 +-
> >   40 files changed, 173 insertions(+), 112 deletions(-)
> > 
> > 
> > 
> 
> Compiled and failed to boot. Reverting the following patch fixes
> the problem.
> 
> commit 4b453403a945b13ea8aa9e8628bec1eaffeb7257 (HEAD -> linux-5.4.y)
> Author: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
> Date:   Mon Oct 3 15:45:57 2022 -0600
> 
>     Revert "drm/amdgpu: use dirty framebuffer helper"
> 
> thanks,
> -- Shuah
>     This reverts commit c89849ecfd2e10838b31c519c2a6607266b58f02.

As that commit is in 5.4.215, it's not part of this -rc series.  Do you
want to submit a patch for the revert, or want me to make one up after
5.4.216 is out?

thanks,

greg k-h