Re: [PATCH] mtd: rawnand: marvell: Use correct logic for nand-keep-config

[Chris Packham]

On 4/10/22 23:02, Miquel Raynal wrote:
> Hi Chris,
>
> Chris.Packham@xxxxxxxxxxxxxxxxxxx wrote on Tue, 27 Sep 2022 02:54:40
> +0000:
>
>> On 27/09/22 15:47, Chris Packham wrote:
>>> From: Tony O'Brien <tony.obrien@xxxxxxxxxxxxxxxxxxx>
>>>
>>> Originally the absence of the marvell,nand-keep-config property caused
>>> the setup_data_interface function to be provided. However when
>>> setup_data_interface was moved into nand_controller_ops the logic was
>>> unintentionally inverted. Update the logic so that only if the
>>> marvell,nand-keep-config property is present the bootloader NAND config
>>> kept.
>>>
>>> Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
>>> Signed-off-by: Tony O'Brien <tony.obrien@xxxxxxxxxxxxxxxxxxx>
>>> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
>>> ---
>>>
>>> Notes:
>>>       I think this is a bug that's been lurking for 4 years or so. I'm not
>>>       sure that's particularly long in the life of an embedded device but it
>>>       does make me wonder if there have been other bug reports about it.
>>>       
>>>       We noticed this because we had a bootloader that used maxed out NAND
>>>       timings which made the time it took the kernel to do anything on the
>>>       file system longer than we expected.
>> I think there might be a similar logic inversion bug in
>> drivers/mtd/nand/raw/denali.c but I lack the ability to test for that
>> platform.
> Agreed, the denali driver has the same issue. Could you please send a
> patch?
Sure although it'll be compile tested only.
>>>    drivers/mtd/nand/raw/marvell_nand.c | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
>>> index 2455a581fd70..b248c5f657d5 100644
>>> --- a/drivers/mtd/nand/raw/marvell_nand.c
>>> +++ b/drivers/mtd/nand/raw/marvell_nand.c
>>> @@ -2672,7 +2672,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
>>>    	chip->controller = &nfc->controller;
>>>    	nand_set_flash_node(chip, np);
>>>    
>>> -	if (!of_property_read_bool(np, "marvell,nand-keep-config"))
>>> +	if (of_property_read_bool(np, "marvell,nand-keep-config"))
>>>    		chip->options |= NAND_KEEP_TIMINGS;
>>>    
>>>    	mtd = nand_to_mtd(chip)
>
> Thanks,
> Miquèl