[PATCH 4/4] ARM: dts: motorola-mapphone: fix LCD reset line polarity

[Dmitry Torokhov]

The LCD driver (panel-dsi-cm), when performing reset, starts with line
set high, then drives it low, holds it there for a moment, and releases
it back to high.  This means that the reset line should be described
as "active low" in DTS. This will be important when the driver is
converted to gpiod API which respects the polarity declared in DTS.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
 arch/arm/boot/dts/motorola-mapphone-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index c7a1f3ffc48c..beffa1cf08b2 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -212,7 +212,7 @@ lcd0: panel@0 {
 		reg = <0>;
 		label = "lcd0";
 		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;	/* gpio101 */
 
 		backlight = <&backlight>;
 
-- 
2.38.0.rc1.362.ged0d419d3c-goog