[PATCH v3 0/4] Modify MxL's CGU clk driver to make it secure boot compatible

[Rahul Tanwar]

MxL's CGU driver was found to be lacking below required features. Add these
required lacking features:

1. Since it is a core driver, it has to conform to secure boot & secure
   access architecture. In order for the register accesses to be secure
   access compliant, it needs regmap support as per our security architecture.
   Hence, replace direct read/writel with regmap based IO. Also remove
   redundant spinlocks from the driver as they are no longer necessary
   because regmap uses its own lock.

2. In MxL's LGM SoC, gate clocks can be controlled either from CGU clk driver
   i.e. this driver or directly from power management driver/daemon. It is
   dependent on the power policy/profile requirements of the end product.

   To support such use cases, provide option to override gate clks enable/disable
   by adding a flag GATE_CLK_HW which controls if these gate clks are controlled
   by HW i.e. this driver or overridden in order to allow it to be controlled
   by power profiles instead.

3. Fix a bug related to missing flags in one 'dcl' clk entry.

This patch series is based on below git tree (linux-v6.0-rc1):
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git


Rahul Tanwar (4):
  clk: mxl: Switch from direct readl/writel based IO to regmap based IO
  clk: mxl: Remove redundant spinlocks
  clk: mxl: Add option to override gate clks enable/disable
  clk: mxl: Fix a clk entry by adding relevant flags

 drivers/clk/x86/Kconfig       |   5 +-
 drivers/clk/x86/clk-cgu-pll.c |  23 ++-----
 drivers/clk/x86/clk-cgu.c     | 122 +++++++++++-----------------------
 drivers/clk/x86/clk-cgu.h     |  46 ++++++-------
 drivers/clk/x86/clk-lgm.c     |  18 +++--
 5 files changed, 82 insertions(+), 132 deletions(-)

-- 
2.17.1