dsi_populate_dsc_params() is called prior to dsi_update_dsc_timing() andReviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
already computes a value for slice_chunk_size, whose value doesn't need
to be recomputed and re-set here.
Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/dsi/dsi_host.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 48c966375ffa..f42794cdd4c1 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -845,7 +845,6 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
u32 reg, reg_ctrl, reg_ctrl2;
u32 slice_per_intf, total_bytes_per_intf;
u32 pkt_per_line;
- u32 bytes_in_slice;
u32 eol_byte_num;
/* first calculate dsc parameters and then program
@@ -860,11 +859,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
if (slice_per_intf > dsc->slice_count)
dsc->slice_count = 1;
- bytes_in_slice = DIV_ROUND_UP(dsc->slice_width * dsc->bits_per_pixel, 8);
-
- dsc->slice_chunk_size = bytes_in_slice;
-
- total_bytes_per_intf = bytes_in_slice * slice_per_intf;
+ total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
eol_byte_num = total_bytes_per_intf % 3;
pkt_per_line = slice_per_intf / dsc->slice_count;
@@ -890,7 +885,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
reg_ctrl |= reg;
reg_ctrl2 &= ~DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH__MASK;
- reg_ctrl2 |= DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH(bytes_in_slice);
+ reg_ctrl2 |= DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH(dsc->slice_chunk_size);
dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg_ctrl);
dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);