[PATCH 3/6] arm: dts: qcom: mdm9615: wp8548-mangoh-green: fix sx150xq node names and probe-reset property

[Neil Armstrong]

Fix the sx150xq node names to pinctrl and use the right probe-reset property.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 30a110984597..a8304769b509 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -116,7 +116,7 @@ i2c@4 {
 			#size-cells = <0>;
 			reg = <4>;
 
-			gpioext0: gpio@3e {
+			gpioext0: pinctrl@3e {
 				/* GPIO Expander 0 Mapping :
 				 * - 0: ARDUINO_RESET_Level shift
 				 * - 1: BattChrgr_PG_N
@@ -142,7 +142,7 @@ gpioext0: gpio@3e {
 				interrupt-parent = <&gpioext1>;
 				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
@@ -154,7 +154,7 @@ i2c@5 {
 			#size-cells = <0>;
 			reg = <5>;
 
-			gpioext1: gpio@3f {
+			gpioext1: pinctrl@3f {
 				/* GPIO Expander 1 Mapping :
 				 * - 0: GPIOEXP_INT1
 				 * - 1: Battery detect
@@ -183,7 +183,7 @@ gpioext1: gpio@3f {
 				interrupt-parent = <&msmgpio>;
 				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
@@ -195,7 +195,7 @@ i2c@6 {
 			#size-cells = <0>;
 			reg = <6>;
 
-			gpioext2: gpio@70 {
+			gpioext2: pinctrl@70 {
 				/* GPIO Expander 2 Mapping :
 				 * - 0: USB_HUB_INTn
 				 * - 1: HUB_CONNECT
@@ -221,7 +221,7 @@ gpioext2: gpio@70 {
 				interrupt-parent = <&gpioext1>;
 				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;

-- 
b4 0.10.1