Re: [PATCH 5/6] dt-bindings: regulators: convert non-smd RPM Regulators bindings to dt-schema

[Rob Herring]

On Thu, 06 Oct 2022 09:58:02 +0000, Neil Armstrong wrote:
> Convert the non-SMD Regulators  bindings to dt-schema and remove the
> old text based bindings now we have migrated all the content.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 246 ---------------------
>  .../bindings/regulator/qcom,ipc-rpm-regulator.yaml | 127 +++++++++++
>  2 files changed, 127 insertions(+), 246 deletions(-)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


pm8058-regulators: vdd_ncp-supply: [[30]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8060-dragonboard.dtb

pm8901-regulators: lvs0_in-supply: [[8]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8060-dragonboard.dtb

pm8901-regulators: lvs1_in-supply: [[29]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8060-dragonboard.dtb

pm8901-regulators: lvs2_in-supply: [[10]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8060-dragonboard.dtb

pm8901-regulators: lvs3_in-supply: [[31]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8060-dragonboard.dtb

pm8901-regulators: mvs_in-supply: [[8]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8060-dragonboard.dtb

regulators: vdd_ncp-supply: [[10]] is not of type 'object'
	arch/arm/boot/dts/qcom-msm8960-cdp.dtb

regulators: vdd_ncp-supply: [[50]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dtb

regulators: vin_ncp-supply: [[48]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dtb