[PATCH 1/3] ipmi: fix msg stack when IPMI is disconnected
From: Zhang Yuchen
Date: Fri Oct 07 2022 - 05:26:58 EST
If you continue to access and send messages at a high frequency (once
every 55s) when the IPMI is disconnected, messages will accumulate in
intf->[hp_]xmit_msg. If it lasts long enough, it takes up a lot of
memory.
The reason is that if IPMI is disconnected, each message will be set to
IDLE after it returns to HOSED through IDLE->ERROR0->HOSED. The next
message goes through the same process when it comes in. This process
needs to wait for IBF_TIMEOUT * (MAX_ERROR_RETRIES + 1) = 55s.
Each message takes 55S to destroy. This results in a continuous increase
in memory.
I find that if I wait 5 seconds after the first message fails, the
status changes to ERROR0 in smi_timeout(). The next message will return
the error code IPMI_NOT_IN_MY_STATE_ERR directly without wait.
This is more in line with our needs.
So instead of setting each message state to IDLE after it reaches the
state HOSED, set state to ERROR0.
After testing, the problem has been solved, no matter how many
consecutive sends, will not cause continuous memory growth. It also
returns to normal immediately after the IPMI is restored.
The verification operations are as follows:
1. Use BPF to record the ipmi_alloc/free_smi_msg().
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
2. Exec `date; time for x in $(seq 1 2); do ipmitool mc info; done`.
3. Record the output of `time` and when free all msgs.
Before:
`time` takes 120s, This is because `ipmitool mc info` send 4 msgs and
waits only 15 seconds for each message. Last msg is free after 440s.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
Oct 05 11:40:55 Attaching 2 probes...
Oct 05 11:41:12 alloc 0xffff9558a05f0c00
Oct 05 11:41:27 alloc 0xffff9558a05f1a00
Oct 05 11:41:42 alloc 0xffff9558a05f0000
Oct 05 11:41:57 alloc 0xffff9558a05f1400
Oct 05 11:42:07 free 0xffff9558a05f0c00
Oct 05 11:42:07 alloc 0xffff9558a05f7000
Oct 05 11:42:22 alloc 0xffff9558a05f2a00
Oct 05 11:42:37 alloc 0xffff9558a05f5a00
Oct 05 11:42:52 alloc 0xffff9558a05f3a00
Oct 05 11:43:02 free 0xffff9558a05f1a00
Oct 05 11:43:57 free 0xffff9558a05f0000
Oct 05 11:44:52 free 0xffff9558a05f1400
Oct 05 11:45:47 free 0xffff9558a05f7000
Oct 05 11:46:42 free 0xffff9558a05f2a00
Oct 05 11:47:37 free 0xffff9558a05f5a00
Oct 05 11:48:32 free 0xffff9558a05f3a00
$ root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do
ipmitool mc info; done
Wed Oct 5 11:41:12 CST 2022
No data available
Get Device ID command failed
No data available
No data available
No valid response received
Get Device ID command failed: Unspecified error
No data available
Get Device ID command failed
No data available
No data available
No valid response received
No data available
Get Device ID command failed
real 1m55.052s
user 0m0.001s
sys 0m0.001s
After:
`time` takes 55s, all msgs is returned and free after 55s.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc
%p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}'
Oct 07 16:30:35 Attaching 2 probes...
Oct 07 16:30:45 alloc 0xffff955943aa9800
Oct 07 16:31:00 alloc 0xffff955943aacc00
Oct 07 16:31:15 alloc 0xffff955943aa8c00
Oct 07 16:31:30 alloc 0xffff955943aaf600
Oct 07 16:31:40 free 0xffff955943aa9800
Oct 07 16:31:40 free 0xffff955943aacc00
Oct 07 16:31:40 free 0xffff955943aa8c00
Oct 07 16:31:40 free 0xffff955943aaf600
Oct 07 16:31:40 alloc 0xffff9558ec8f7e00
Oct 07 16:31:40 free 0xffff9558ec8f7e00
Oct 07 16:31:40 alloc 0xffff9558ec8f7800
Oct 07 16:31:40 free 0xffff9558ec8f7800
Oct 07 16:31:40 alloc 0xffff9558ec8f7e00
Oct 07 16:31:40 free 0xffff9558ec8f7e00
Oct 07 16:31:40 alloc 0xffff9558ec8f7800
Oct 07 16:31:40 free 0xffff9558ec8f7800
root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do
ipmitool mc info; done
Fri Oct 7 16:30:45 CST 2022
No data available
Get Device ID command failed
No data available
No data available
No valid response received
Get Device ID command failed: Unspecified error
Get Device ID command failed: 0xd5 Command not supported in present state
Get Device ID command failed: Command not supported in present state
real 0m55.038s
user 0m0.001s
sys 0m0.001s
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@xxxxxxxxxxxxx>
---
drivers/char/ipmi/ipmi_kcs_sm.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index efda90dcf5b3..e7f2cd10e5a6 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -122,10 +122,10 @@ struct si_sm_data {
unsigned long error0_timeout;
};
-static unsigned int init_kcs_data(struct si_sm_data *kcs,
- struct si_sm_io *io)
+static unsigned int init_kcs_data_with_state(struct si_sm_data *kcs,
+ struct si_sm_io *io, enum kcs_states state)
{
- kcs->state = KCS_IDLE;
+ kcs->state = state;
kcs->io = io;
kcs->write_pos = 0;
kcs->write_count = 0;
@@ -140,6 +140,12 @@ static unsigned int init_kcs_data(struct si_sm_data *kcs,
return 2;
}
+static unsigned int init_kcs_data(struct si_sm_data *kcs,
+ struct si_sm_io *io)
+{
+ return init_kcs_data_with_state(kcs, io, KCS_IDLE);
+}
+
static inline unsigned char read_status(struct si_sm_data *kcs)
{
return kcs->io->inputb(kcs->io, 1);
@@ -495,7 +501,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time)
}
if (kcs->state == KCS_HOSED) {
- init_kcs_data(kcs, kcs->io);
+ init_kcs_data_with_state(kcs, kcs->io, KCS_ERROR0);
return SI_SM_HOSED;
}
--
2.30.2