[PATCH v3 04/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6797
From: Yassine Oudjana
Date: Fri Oct 07 2022 - 08:59:59 EST
From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
Combine MT6797 pin controller document into MT6779 one. reg and
reg-names property constraints are set using conditionals.
A conditional is also used to make interrupt-related properties
required on the MT6779 pin controller only, since the MT6797
controller doesn't support interrupts (or not yet, at least).
drive-strength and slew-rate properties which weren't described
in the MT6779 document before are brought in from the MT6797 one.
Both pin controllers share a common driver core so they should
both support these properties.
Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../pinctrl/mediatek,mt6779-pinctrl.yaml | 87 ++++++---
.../pinctrl/mediatek,mt6797-pinctrl.yaml | 176 ------------------
MAINTAINERS | 2 +-
3 files changed, 67 insertions(+), 198 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index d45f0e75a698..a2141eb0854e 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller
maintainers:
- Andy Teng <andy.teng@xxxxxxxxxxxx>
+ - Sean Wang <sean.wang@xxxxxxxxxx>
description:
The MediaTek pin controller on MT6779 is used to control pin
@@ -15,23 +16,14 @@ description:
properties:
compatible:
- const: mediatek,mt6779-pinctrl
+ enum:
+ - mediatek,mt6779-pinctrl
+ - mediatek,mt6797-pinctrl
reg:
- minItems: 9
- maxItems: 9
-
- reg-names:
- items:
- - const: "gpio"
- - const: "iocfg_rm"
- - const: "iocfg_br"
- - const: "iocfg_lm"
- - const: "iocfg_lb"
- - const: "iocfg_rt"
- - const: "iocfg_lt"
- - const: "iocfg_tl"
- - const: "eint"
+ description: Physical addresses for GPIO base(s) and EINT registers.
+
+ reg-names: true
gpio-controller: true
@@ -58,18 +50,65 @@ properties:
"#interrupt-cells":
const: 2
-allOf:
- - $ref: "pinctrl.yaml#"
-
required:
- compatible
- reg
- reg-names
- gpio-controller
- "#gpio-cells"
- - interrupt-controller
- - interrupts
- - "#interrupt-cells"
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6779-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 9
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg_rm
+ - const: iocfg_br
+ - const: iocfg_lm
+ - const: iocfg_lb
+ - const: iocfg_rt
+ - const: iocfg_lt
+ - const: iocfg_tl
+ - const: eint
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6797-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 5
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfgl
+ - const: iocfgb
+ - const: iocfgr
+ - const: iocfgt
+ - if:
+ properties:
+ reg-names:
+ contains:
+ const: eint
+ then:
+ required:
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
patternProperties:
'-[0-9]*$':
@@ -111,6 +150,12 @@ patternProperties:
input-schmitt-disable: true
+ drive-strength:
+ enum: [2, 4, 8, 12, 16]
+
+ slew-rate:
+ enum: [0, 1]
+
mediatek,pull-up-adv:
description: |
Pull up setings for 2 pull resistors, R0 and R1. User can
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
deleted file mode 100644
index 637a8386e23e..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+++ /dev/null
@@ -1,176 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek MT6797 Pin Controller
-
-maintainers:
- - Sean Wang <sean.wang@xxxxxxxxxx>
-
-description: |+
- The MediaTek's MT6797 Pin controller is used to control SoC pins.
-
-properties:
- compatible:
- const: mediatek,mt6797-pinctrl
-
- reg:
- minItems: 5
- maxItems: 5
-
- reg-names:
- items:
- - const: gpio
- - const: iocfgl
- - const: iocfgb
- - const: iocfgr
- - const: iocfgt
-
- gpio-controller: true
-
- "#gpio-cells":
- const: 2
- description: |
- Number of cells in GPIO specifier. Since the generic GPIO
- binding is used, the amount of cells must be specified as 2. See the below
- mentioned gpio binding representation for description of particular cells.
-
- interrupt-controller: true
-
- interrupts:
- maxItems: 1
-
- "#interrupt-cells":
- const: 2
-
-allOf:
- - $ref: "pinctrl.yaml#"
-
-required:
- - compatible
- - reg
- - reg-names
- - gpio-controller
- - "#gpio-cells"
-
-patternProperties:
- '-[0-9]+$':
- type: object
- additionalProperties: false
- patternProperties:
- 'pins':
- type: object
- additionalProperties: false
- description: |
- A pinctrl node should contain at least one subnodes representing the
- pinctrl groups available on the machine. Each subnode will list the
- pins it needs, and how they should be configured, with regard to muxer
- configuration, pullups, drive strength, input enable/disable and input
- schmitt.
- $ref: "/schemas/pinctrl/pincfg-node.yaml"
-
- properties:
- pinmux:
- description:
- integer array, represents gpio pin number and mux setting.
- Supported pin number and mux varies for different SoCs, and are
- defined as macros in <soc>-pinfunc.h directly.
-
- bias-disable: true
-
- bias-pull-up: true
-
- bias-pull-down: true
-
- input-enable: true
-
- input-disable: true
-
- output-enable: true
-
- output-low: true
-
- output-high: true
-
- input-schmitt-enable: true
-
- input-schmitt-disable: true
-
- drive-strength:
- enum: [2, 4, 8, 12, 16]
-
- slew-rate:
- enum: [0, 1]
-
- mediatek,pull-up-adv:
- description: |
- Pull up setings for 2 pull resistors, R0 and R1. User can
- configure those special pins. Valid arguments are described as below:
- 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
- 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
- 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
- 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
-
- mediatek,pull-down-adv:
- description: |
- Pull down settings for 2 pull resistors, R0 and R1. User can
- configure those special pins. Valid arguments are described as below:
- 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
- 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
- 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
- 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
-
- mediatek,tdsel:
- description: |
- An integer describing the steps for output level shifter duty
- cycle when asserted (high pulse width adjustment). Valid arguments
- are from 0 to 15.
- $ref: /schemas/types.yaml#/definitions/uint32
-
- mediatek,rdsel:
- description: |
- An integer describing the steps for input level shifter duty cycle
- when asserted (high pulse width adjustment). Valid arguments are
- from 0 to 63.
- $ref: /schemas/types.yaml#/definitions/uint32
-
- required:
- - pinmux
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/pinctrl/mt6797-pinfunc.h>
-
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- pio: pinctrl@10005000 {
- compatible = "mediatek,mt6797-pinctrl";
- reg = <0 0x10005000 0 0x1000>,
- <0 0x10002000 0 0x400>,
- <0 0x10002400 0 0x400>,
- <0 0x10002800 0 0x400>,
- <0 0x10002C00 0 0x400>;
- reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt";
- gpio-controller;
- #gpio-cells = <2>;
-
- uart_pins_a: uart-0 {
- pins1 {
- pinmux = <MT6797_GPIO232__FUNC_URXD1>,
- <MT6797_GPIO233__FUNC_UTXD1>;
- };
- };
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 99330a7e4ab2..184519342e45 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16282,7 +16282,7 @@ M: Sean Wang <sean.wang@xxxxxxxxxx>
L: linux-mediatek@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
-F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
F: drivers/pinctrl/mediatek/
--
2.38.0