RE: [EXT] [PATCH v12 5/6] PCI: endpoint: pci-epf-vntb: Clean up

[Frank Li]

> -----Original Message-----
> From: Frank Li <Frank.Li@xxxxxxx>
> Sent: Friday, October 7, 2022 2:13 PM
> To: imx@xxxxxxxxxxxxxxx; Jon Mason <jdmason@xxxxxxxx>; Dave Jiang
> <dave.jiang@xxxxxxxxx>; Allen Hubbe <allenbh@xxxxxxxxx>; Kishon Vijay
> Abraham I <kishon@xxxxxx>; Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>;
> Krzysztof Wilczyński <kw@xxxxxxxxx>; Manivannan Sadhasivam
> <mani@xxxxxxxxxx>; Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; open list:NTB
> DRIVER CORE <ntb@xxxxxxxxxxxxxxx>; open list:PCI ENDPOINT SUBSYSTEM
> <linux-pci@xxxxxxxxxxxxxxx>; open list <linux-kernel@xxxxxxxxxxxxxxx>
> Subject: [EXT] [PATCH v12 5/6] PCI: endpoint: pci-epf-vntb: Clean up

[Frank Li] sorry! Please forget this patch, which below old series. 
Please check v13's patches.
 
> 
> Caution: EXT Email
> 
> Remove unused field: epf_db_phy.
> Remove __iomem before epf_db.
> Change epf_db to u32* from void *
> Remove duplicate check if (readl(ntb->epf_db + i * 4)).
> Using sizeof(u32) instead of number 4 at all place.
> 
> Clean up sparse build warning:
>   Using  epf_db[i] instead of readl() because epf_db is located in local
>   memory and allocated by dma_alloc_coherent(). Sparse build warning
> when
>   there are not __iomem at readl().
>   Added __iomem force type convert in vntb_epf_peer_spad_read\write()
> and
>   vntb_epf_spad_read\write(). This require strong order at read and write.
> 
> Replace pci_epc_mem_free_addr() with pci_epf_free_space() at error handle
> path to match pci_epf_alloc_space().
> 
> Cleanup warning found by scripts/kernel-doc
> Fix indentation of the struct epf_ntb_ctrl
> Consolidate term
>   host, host1 to HOST
>   vhost, vHost, Vhost, VHOST2 to VHOST
> 
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
>  drivers/pci/endpoint/functions/pci-epf-vntb.c | 157 ++++++++++--------
>  1 file changed, 90 insertions(+), 67 deletions(-)
> 
> diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c
> b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> index 1466dd1904175..acea753af29ed 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> @@ -11,7 +11,7 @@
>   * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
>   */
> 
> -/**
> +/*
>   * +------------+         +---------------------------------------+
>   * |            |         |                                       |
>   * +------------+         |                        +--------------+
> @@ -99,20 +99,20 @@ enum epf_ntb_bar {
>   *       NTB Driver               NTB Driver
>   */
>  struct epf_ntb_ctrl {
> -       u32     command;
> -       u32     argument;
> -       u16     command_status;
> -       u16     link_status;
> -       u32     topology;
> -       u64     addr;
> -       u64     size;
> -       u32     num_mws;
> -       u32     reserved;
> -       u32     spad_offset;
> -       u32     spad_count;
> -       u32     db_entry_size;
> -       u32     db_data[MAX_DB_COUNT];
> -       u32     db_offset[MAX_DB_COUNT];
> +       u32 command;
> +       u32 argument;
> +       u16 command_status;
> +       u16 link_status;
> +       u32 topology;
> +       u64 addr;
> +       u64 size;
> +       u32 num_mws;
> +       u32 reserved;
> +       u32 spad_offset;
> +       u32 spad_count;
> +       u32 db_entry_size;
> +       u32 db_data[MAX_DB_COUNT];
> +       u32 db_offset[MAX_DB_COUNT];
>  } __packed;
> 
>  struct epf_ntb {
> @@ -136,8 +136,7 @@ struct epf_ntb {
> 
>         struct epf_ntb_ctrl *reg;
> 
> -       phys_addr_t epf_db_phy;
> -       void __iomem *epf_db;
> +       u32 *epf_db;
> 
>         phys_addr_t vpci_mw_phy[MAX_MW];
>         void __iomem *vpci_mw_addr[MAX_MW];
> @@ -156,12 +155,14 @@ static struct pci_epf_header epf_ntb_header = {
>  };
> 
>  /**
> - * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host
> + * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host (VHOST)
>   * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   * @link_up: true or false indicating Link is UP or Down
>   *
>   * Once NTB function in HOST invoke ntb_link_enable(),
> - * this NTB function driver will trigger a link event to vhost.
> + * this NTB function driver will trigger a link event to VHOST.
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
>  {
> @@ -175,9 +176,9 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool
> link_up)
>  }
> 
>  /**
> - * epf_ntb_configure_mw() - Configure the Outbound Address Space for
> vhost
> - *   to access the memory window of host
> - * @ntb: NTB device that facilitates communication between host and vhost
> + * epf_ntb_configure_mw() - Configure the Outbound Address Space for
> VHOST
> + *   to access the memory window of HOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   * @mw: Index of the memory window (either 0, 1, 2 or 3)
>   *
>   *                          EP Outbound Window
> @@ -194,7 +195,9 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool
> link_up)
>   * |        |              |           |
>   * |        |              |           |
>   * +--------+              +-----------+
> - *  VHost                   PCI EP
> + *  VHOST                   PCI EP
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_configure_mw(struct epf_ntb *ntb, u32 mw)
>  {
> @@ -219,7 +222,7 @@ static int epf_ntb_configure_mw(struct epf_ntb *ntb,
> u32 mw)
> 
>  /**
>   * epf_ntb_teardown_mw() - Teardown the configured OB ATU
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   * @mw: Index of the memory window (either 0, 1, 2 or 3)
>   *
>   * Teardown the configured OB ATU configured in epf_ntb_configure_mw()
> using
> @@ -234,12 +237,12 @@ static void epf_ntb_teardown_mw(struct epf_ntb
> *ntb, u32 mw)
>  }
> 
>  /**
> - * epf_ntb_cmd_handler() - Handle commands provided by the NTB Host
> + * epf_ntb_cmd_handler() - Handle commands provided by the NTB HOST
>   * @work: work_struct for the epf_ntb_epc
>   *
>   * Workqueue function that gets invoked for the two epf_ntb_epc
>   * periodically (once every 5ms) to see if it has received any commands
> - * from NTB host. The host can send commands to configure doorbell or
> + * from NTB HOST. The HOST can send commands to configure doorbell or
>   * configure memory window or to update link status.
>   */
>  static void epf_ntb_cmd_handler(struct work_struct *work)
> @@ -254,12 +257,9 @@ static void epf_ntb_cmd_handler(struct work_struct
> *work)
>         ntb = container_of(work, struct epf_ntb, cmd_handler.work);
> 
>         for (i = 1; i < ntb->db_count; i++) {
> -               if (readl(ntb->epf_db + i * 4)) {
> -                       if (readl(ntb->epf_db + i * 4))
> -                               ntb->db |= 1 << (i - 1);
> -
> +               if (ntb->epf_db[i]) {
>                         ntb_db_event(&ntb->ntb, i);
> -                       writel(0, ntb->epf_db + i * 4);
> +                       ntb->epf_db[i] = 0;
>                 }
>         }
> 
> @@ -321,8 +321,8 @@ static void epf_ntb_cmd_handler(struct work_struct
> *work)
> 
>  /**
>   * epf_ntb_config_sspad_bar_clear() - Clear Config + Self scratchpad BAR
> - * @ntb_epc: EPC associated with one of the HOST which holds peer's
> outbound
> - *          address.
> + * @ntb: EPC associated with one of the HOST which holds peer's outbound
> + *      address.
>   *
>   * Clear BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
>   * self scratchpad region (removes inbound ATU configuration). While BAR0
> is
> @@ -331,8 +331,10 @@ static void epf_ntb_cmd_handler(struct work_struct
> *work)
>   * used for self scratchpad from epf_ntb_bar[BAR_CONFIG].
>   *
>   * Please note the self scratchpad region and config region is combined to
> - * a single region and mapped using the same BAR. Also note HOST2's peer
> - * scratchpad is HOST1's self scratchpad.
> + * a single region and mapped using the same BAR. Also note VHOST's peer
> + * scratchpad is HOST's self scratchpad.
> + *
> + * Returns: void
>   */
>  static void epf_ntb_config_sspad_bar_clear(struct epf_ntb *ntb)
>  {
> @@ -347,13 +349,15 @@ static void epf_ntb_config_sspad_bar_clear(struct
> epf_ntb *ntb)
> 
>  /**
>   * epf_ntb_config_sspad_bar_set() - Set Config + Self scratchpad BAR
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   *
> - * Map BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
> + * Map BAR0 of EP CONTROLLER which contains the VHOST's config and
>   * self scratchpad region.
>   *
>   * Please note the self scratchpad region and config region is combined to
>   * a single region and mapped using the same BAR.
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_config_sspad_bar_set(struct epf_ntb *ntb)
>  {
> @@ -380,7 +384,7 @@ static int epf_ntb_config_sspad_bar_set(struct
> epf_ntb *ntb)
>  /**
>   * epf_ntb_config_spad_bar_free() - Free the physical memory associated
> with
>   *   config + scratchpad region
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   */
>  static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
>  {
> @@ -393,11 +397,13 @@ static void epf_ntb_config_spad_bar_free(struct
> epf_ntb *ntb)
>  /**
>   * epf_ntb_config_spad_bar_alloc() - Allocate memory for config +
> scratchpad
>   *   region
> - * @ntb: NTB device that facilitates communication between HOST1 and
> HOST2
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   *
>   * Allocate the Local Memory mentioned in the above diagram. The size of
>   * CONFIG REGION is sizeof(struct epf_ntb_ctrl) and size of SCRATCHPAD
> REGION
>   * is obtained from "spad-count" configfs entry.
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
>  {
> @@ -424,7 +430,7 @@ static int epf_ntb_config_spad_bar_alloc(struct
> epf_ntb *ntb)
>         spad_count = ntb->spad_count;
> 
>         ctrl_size = sizeof(struct epf_ntb_ctrl);
> -       spad_size = 2 * spad_count * 4;
> +       spad_size = 2 * spad_count * sizeof(u32);
> 
>         if (!align) {
>                 ctrl_size = roundup_pow_of_two(ctrl_size);
> @@ -454,7 +460,7 @@ static int epf_ntb_config_spad_bar_alloc(struct
> epf_ntb *ntb)
>         ctrl->num_mws = ntb->num_mws;
>         ntb->spad_size = spad_size;
> 
> -       ctrl->db_entry_size = 4;
> +       ctrl->db_entry_size = sizeof(u32);
> 
>         for (i = 0; i < ntb->db_count; i++) {
>                 ntb->reg->db_data[i] = 1 + i;
> @@ -465,11 +471,13 @@ static int epf_ntb_config_spad_bar_alloc(struct
> epf_ntb *ntb)
>  }
> 
>  /**
> - * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   *
>   * Configure MSI/MSI-X capability for each interface with number of
>   * interrupts equal to "db_count" configfs entry.
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
>  {
> @@ -511,18 +519,22 @@ static int epf_ntb_configure_interrupt(struct
> epf_ntb *ntb)
> 
>  /**
>   * epf_ntb_db_bar_init() - Configure Doorbell window BARs
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_db_bar_init(struct epf_ntb *ntb)
>  {
>         const struct pci_epc_features *epc_features;
> -       u32 align;
>         struct device *dev = &ntb->epf->dev;
> -       int ret;
>         struct pci_epf_bar *epf_bar;
> -       void __iomem *mw_addr;
>         enum pci_barno barno;
> -       size_t size = 4 * ntb->db_count;
> +       void *mw_addr;
> +       size_t size;
> +       u32 align;
> +       int ret;
> +
> +       size = sizeof(u32) * ntb->db_count;
> 
>         epc_features = pci_epc_get_features(ntb->epf->epc,
>                                             ntb->epf->func_no,
> @@ -557,14 +569,14 @@ static int epf_ntb_db_bar_init(struct epf_ntb *ntb)
>         return ret;
> 
>  err_alloc_peer_mem:
> -       pci_epc_mem_free_addr(ntb->epf->epc, epf_bar->phys_addr, mw_addr,
> epf_bar->size);
> +       pci_epf_free_space(ntb->epf, mw_addr, barno, 0);
>         return -1;
>  }
> 
>  /**
>   * epf_ntb_db_bar_clear() - Clear doorbell BAR and free memory
>   *   allocated in peer's outbound address space
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   */
>  static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
>  {
> @@ -580,8 +592,9 @@ static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
> 
>  /**
>   * epf_ntb_mw_bar_init() - Configure Memory window BARs
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
>  {
> @@ -629,7 +642,7 @@ static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
> 
>  /**
>   * epf_ntb_mw_bar_clear() - Clear Memory window BARs
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   */
>  static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb)
>  {
> @@ -652,7 +665,7 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb
> *ntb)
> 
>  /**
>   * epf_ntb_epc_destroy() - Cleanup NTB EPC interface
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   *
>   * Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB
> interfaces
>   */
> @@ -665,7 +678,9 @@ static void epf_ntb_epc_destroy(struct epf_ntb *ntb)
>  /**
>   * epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB
>   * constructs (scratchpad region, doorbell, memorywindow)
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
>  {
> @@ -706,11 +721,13 @@ static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
> 
>  /**
>   * epf_ntb_epc_init() - Initialize NTB interface
> - * @ntb: NTB device that facilitates communication between HOST and
> vHOST2
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   *
>   * Wrapper to initialize a particular EPC interface and start the workqueue
> - * to check for commands from host. This function will write to the
> + * to check for commands from HOST. This function will write to the
>   * EP controller HW for configuring it.
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_epc_init(struct epf_ntb *ntb)
>  {
> @@ -777,7 +794,7 @@ static int epf_ntb_epc_init(struct epf_ntb *ntb)
> 
>  /**
>   * epf_ntb_epc_cleanup() - Cleanup all NTB interfaces
> - * @ntb: NTB device that facilitates communication between HOST1 and
> HOST2
> + * @ntb: NTB device that facilitates communication between HOST and
> VHOST
>   *
>   * Wrapper to cleanup all NTB interfaces.
>   */
> @@ -934,6 +951,8 @@ static const struct config_item_type ntb_group_type
> = {
>   *
>   * Add configfs directory specific to NTB. This directory will hold
>   * NTB specific properties like db_count, spad_count, num_mws etc.,
> + *
> + * Returns: Pointer to config_group
>   */
>  static struct config_group *epf_ntb_add_cfs(struct pci_epf *epf,
>                                             struct config_group *group)
> @@ -1084,11 +1103,11 @@ static int vntb_epf_link_enable(struct ntb_dev
> *ntb,
>  static u32 vntb_epf_spad_read(struct ntb_dev *ndev, int idx)
>  {
>         struct epf_ntb *ntb = ntb_ndev(ndev);
> -       int off = ntb->reg->spad_offset, ct = ntb->reg->spad_count * 4;
> +       int off = ntb->reg->spad_offset, ct = ntb->reg->spad_count * sizeof(u32);
>         u32 val;
> -       void __iomem *base = ntb->reg;
> +       void __iomem *base = (void __iomem *)ntb->reg;
> 
> -       val = readl(base + off + ct + idx * 4);
> +       val = readl(base + off + ct + idx * sizeof(u32));
>         return val;
>  }
> 
> @@ -1096,10 +1115,10 @@ static int vntb_epf_spad_write(struct ntb_dev
> *ndev, int idx, u32 val)
>  {
>         struct epf_ntb *ntb = ntb_ndev(ndev);
>         struct epf_ntb_ctrl *ctrl = ntb->reg;
> -       int off = ctrl->spad_offset, ct = ctrl->spad_count * 4;
> -       void __iomem *base = ntb->reg;
> +       int off = ctrl->spad_offset, ct = ctrl->spad_count * sizeof(u32);
> +       void __iomem *base = (void __iomem *)ntb->reg;
> 
> -       writel(val, base + off + ct + idx * 4);
> +       writel(val, base + off + ct + idx * sizeof(u32));
>         return 0;
>  }
> 
> @@ -1108,10 +1127,10 @@ static u32 vntb_epf_peer_spad_read(struct
> ntb_dev *ndev, int pidx, int idx)
>         struct epf_ntb *ntb = ntb_ndev(ndev);
>         struct epf_ntb_ctrl *ctrl = ntb->reg;
>         int off = ctrl->spad_offset;
> -       void __iomem *base = ntb->reg;
> +       void __iomem *base = (void __iomem *)ntb->reg;
>         u32 val;
> 
> -       val = readl(base + off + idx * 4);
> +       val = readl(base + off + idx * sizeof(u32));
>         return val;
>  }
> 
> @@ -1120,9 +1139,9 @@ static int vntb_epf_peer_spad_write(struct
> ntb_dev *ndev, int pidx, int idx, u32
>         struct epf_ntb *ntb = ntb_ndev(ndev);
>         struct epf_ntb_ctrl *ctrl = ntb->reg;
>         int off = ctrl->spad_offset;
> -       void __iomem *base = ntb->reg;
> +       void __iomem *base = (void __iomem *)ntb->reg;
> 
> -       writel(val, base + off + idx * 4);
> +       writel(val, base + off + idx * sizeof(u32));
>         return 0;
>  }
> 
> @@ -1275,6 +1294,8 @@ static struct pci_driver vntb_pci_driver = {
>   * Invoked when a primary interface or secondary interface is bound to EPC
>   * device. This function will succeed only when EPC is bound to both the
>   * interfaces.
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_bind(struct pci_epf *epf)
>  {
> @@ -1359,6 +1380,8 @@ static struct pci_epf_ops epf_ntb_ops = {
>   *
>   * Probe NTB function driver when endpoint function bus detects a NTB
>   * endpoint function.
> + *
> + * Returns: Zero for success, or an error code in case of failure
>   */
>  static int epf_ntb_probe(struct pci_epf *epf)
>  {
> --
> 2.35.1