Re: [PATCH 1/2] arm64: dts: qcom: sm8150: align TLMM pin configuration with DT schema

From: Konrad Dybcio
Date: Fri Oct 07 2022 - 15:43:20 EST

Next message: Corey Minyard: "Re: [PATCH 1/3] ipmi: fix msg stack when IPMI is disconnected"
Previous message: patchwork-bot+bluetooth: "Re: [PATCH v3] Bluetooth: btusb: Introduce generic USB reset"
In reply to: Krzysztof Kozlowski: "Re: [PATCH 1/2] arm64: dts: qcom: sm8150: align TLMM pin configuration with DT schema"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 6.10.2022 16:45, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 60 ++-
> .../dts/qcom/sm8150-microsoft-surface-duo.dts | 2 +-
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 376 ++++++------------
> 3 files changed, 157 insertions(+), 281 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index 87ab0e1ecd16..06d0b6edd48a 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -477,26 +477,26 @@ &pcie1_phy {
> &tlmm {
> gpio-reserved-ranges = <0 4>;
>
> - sdc2_on: sdc2_on {
> - clk {
> + sdc2_on: sdc2-on-state {
> + clk-pins {
> pins = "sdc2_clk";
> bias-disable; /* No pull */
> drive-strength = <16>; /* 16 MA */
I think these comments could go as well? The properties are rather self-explanatory.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
> };
>
> - cmd {
> + cmd-pins {
> pins = "sdc2_cmd";
> bias-pull-up; /* pull up */
> drive-strength = <16>; /* 16 MA */
> };
>
> - data {
> + data-pins {
> pins = "sdc2_data";
> bias-pull-up; /* pull up */
> drive-strength = <16>; /* 16 MA */
> };
>
> - sd-cd {
> + sd-cd-pins {
> pins = "gpio96";
> function = "gpio";
> bias-pull-up; /* pull up */
> @@ -504,26 +504,26 @@ sd-cd {
> };
> };
>
> - sdc2_off: sdc2_off {
> - clk {
> + sdc2_off: sdc2-off-state {
> + clk-pins {
> pins = "sdc2_clk";
> bias-disable; /* No pull */
> drive-strength = <2>; /* 2 MA */
> };
>
> - cmd {
> + cmd-pins {
> pins = "sdc2_cmd";
> bias-pull-up; /* pull up */
> drive-strength = <2>; /* 2 MA */
> };
>
> - data {
> + data-pins {
> pins = "sdc2_data";
> bias-pull-up; /* pull up */
> drive-strength = <2>; /* 2 MA */
> };
>
> - sd-cd {
> + sd-cd-pins {
> pins = "gpio96";
> function = "gpio";
> bias-pull-up; /* pull up */
> @@ -531,66 +531,62 @@ sd-cd {
> };
> };
>
> - usb2phy_ac_en1_default: usb2phy_ac_en1_default {
> - mux {
> - pins = "gpio113";
> - function = "usb2phy_ac";
> - bias-disable;
> - drive-strength = <2>;
> - };
> + usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
> + pins = "gpio113";
> + function = "usb2phy_ac";
> + bias-disable;
> + drive-strength = <2>;
> };
>
> - usb2phy_ac_en2_default: usb2phy_ac_en2_default {
> - mux {
> - pins = "gpio123";
> - function = "usb2phy_ac";
> - bias-disable;
> - drive-strength = <2>;
> - };
> + usb2phy_ac_en2_default: usb2phy-ac-en2-default-state {
> + pins = "gpio123";
> + function = "usb2phy_ac";
> + bias-disable;
> + drive-strength = <2>;
> };
>
> - ethernet_defaults: ethernet-defaults {
> - mdc {
> + ethernet_defaults: ethernet-defaults-state {
> + mdc-pins {
> pins = "gpio7";
> function = "rgmii";
> bias-pull-up;
> };
>
> - mdio {
> + mdio-pins {
> pins = "gpio59";
> function = "rgmii";
> bias-pull-up;
> };
>
> - rgmii-rx {
> + rgmii-rx-pins {
> pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116";
> function = "rgmii";
> bias-disable;
> drive-strength = <2>;
> };
>
> - rgmii-tx {
> + rgmii-tx-pins {
> pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121";
> function = "rgmii";
> bias-pull-up;
> drive-strength = <16>;
> };
>
> - phy-intr {
> + phy-intr-pins {
> pins = "gpio124";
> function = "emac_phy";
> bias-disable;
> drive-strength = <8>;
> };
>
> - pps {
> + pps-pins {
> pins = "gpio81";
> function = "emac_pps";
> bias-disable;
> drive-strength = <8>;
> };
>
> - phy-reset {
> + phy-reset-pins {
> pins = "gpio79";
> function = "gpio";
> bias-pull-up;
> diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
> index bb278ecac3fa..5397fba9417b 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
> @@ -475,7 +475,7 @@ &pon_resin {
> &tlmm {
> gpio-reserved-ranges = <126 4>;
>
> - da7280_intr_default: da7280-intr-default {
> + da7280_intr_default: da7280-intr-default-state {
> pins = "gpio42";
> function = "gpio";
> bias-pull-up;
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index cef8c4f4f0ff..18195ae2d021 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -2276,422 +2276,302 @@ tlmm: pinctrl@3100000 {
> #interrupt-cells = <2>;
> wakeup-parent = <&pdc>;
>
> - qup_i2c0_default: qup-i2c0-default {
> - mux {
> - pins = "gpio0", "gpio1";
> - function = "qup0";
> - };
> -
> - config {
> - pins = "gpio0", "gpio1";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c0_default: qup-i2c0-default-state {
> + pins = "gpio0", "gpio1";
> + function = "qup0";
> + drive-strength = <0x02>;
> + bias-disable;
> };
>
> - qup_spi0_default: qup-spi0-default {
> + qup_spi0_default: qup-spi0-default-state {
> pins = "gpio0", "gpio1", "gpio2", "gpio3";
> function = "qup0";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c1_default: qup-i2c1-default {
> - mux {
> - pins = "gpio114", "gpio115";
> - function = "qup1";
> - };
> -
> - config {
> - pins = "gpio114", "gpio115";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c1_default: qup-i2c1-default-state {
> + pins = "gpio114", "gpio115";
> + function = "qup1";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi1_default: qup-spi1-default {
> + qup_spi1_default: qup-spi1-default-state {
> pins = "gpio114", "gpio115", "gpio116", "gpio117";
> function = "qup1";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c2_default: qup-i2c2-default {
> - mux {
> - pins = "gpio126", "gpio127";
> - function = "qup2";
> - };
> -
> - config {
> - pins = "gpio126", "gpio127";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c2_default: qup-i2c2-default-state {
> + pins = "gpio126", "gpio127";
> + function = "qup2";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi2_default: qup-spi2-default {
> + qup_spi2_default: qup-spi2-default-state {
> pins = "gpio126", "gpio127", "gpio128", "gpio129";
> function = "qup2";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c3_default: qup-i2c3-default {
> - mux {
> - pins = "gpio144", "gpio145";
> - function = "qup3";
> - };
> -
> - config {
> - pins = "gpio144", "gpio145";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c3_default: qup-i2c3-default-state {
> + pins = "gpio144", "gpio145";
> + function = "qup3";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi3_default: qup-spi3-default {
> + qup_spi3_default: qup-spi3-default-state {
> pins = "gpio144", "gpio145", "gpio146", "gpio147";
> function = "qup3";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c4_default: qup-i2c4-default {
> - mux {
> - pins = "gpio51", "gpio52";
> - function = "qup4";
> - };
> -
> - config {
> - pins = "gpio51", "gpio52";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c4_default: qup-i2c4-default-state {
> + pins = "gpio51", "gpio52";
> + function = "qup4";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi4_default: qup-spi4-default {
> + qup_spi4_default: qup-spi4-default-state {
> pins = "gpio51", "gpio52", "gpio53", "gpio54";
> function = "qup4";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c5_default: qup-i2c5-default {
> - mux {
> - pins = "gpio121", "gpio122";
> - function = "qup5";
> - };
> -
> - config {
> - pins = "gpio121", "gpio122";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c5_default: qup-i2c5-default-state {
> + pins = "gpio121", "gpio122";
> + function = "qup5";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi5_default: qup-spi5-default {
> + qup_spi5_default: qup-spi5-default-state {
> pins = "gpio119", "gpio120", "gpio121", "gpio122";
> function = "qup5";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c6_default: qup-i2c6-default {
> - mux {
> - pins = "gpio6", "gpio7";
> - function = "qup6";
> - };
> -
> - config {
> - pins = "gpio6", "gpio7";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c6_default: qup-i2c6-default-state {
> + pins = "gpio6", "gpio7";
> + function = "qup6";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi6_default: qup-spi6_default {
> + qup_spi6_default: qup-spi6_default-state {
> pins = "gpio4", "gpio5", "gpio6", "gpio7";
> function = "qup6";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c7_default: qup-i2c7-default {
> - mux {
> - pins = "gpio98", "gpio99";
> - function = "qup7";
> - };
> -
> - config {
> - pins = "gpio98", "gpio99";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c7_default: qup-i2c7-default-state {
> + pins = "gpio98", "gpio99";
> + function = "qup7";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi7_default: qup-spi7_default {
> + qup_spi7_default: qup-spi7_default-state {
> pins = "gpio98", "gpio99", "gpio100", "gpio101";
> function = "qup7";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c8_default: qup-i2c8-default {
> - mux {
> - pins = "gpio88", "gpio89";
> - function = "qup8";
> - };
> -
> - config {
> - pins = "gpio88", "gpio89";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c8_default: qup-i2c8-default-state {
> + pins = "gpio88", "gpio89";
> + function = "qup8";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi8_default: qup-spi8-default {
> + qup_spi8_default: qup-spi8-default-state {
> pins = "gpio88", "gpio89", "gpio90", "gpio91";
> function = "qup8";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c9_default: qup-i2c9-default {
> - mux {
> - pins = "gpio39", "gpio40";
> - function = "qup9";
> - };
> -
> - config {
> - pins = "gpio39", "gpio40";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c9_default: qup-i2c9-default-state {
> + pins = "gpio39", "gpio40";
> + function = "qup9";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi9_default: qup-spi9-default {
> + qup_spi9_default: qup-spi9-default-state {
> pins = "gpio39", "gpio40", "gpio41", "gpio42";
> function = "qup9";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c10_default: qup-i2c10-default {
> - mux {
> - pins = "gpio9", "gpio10";
> - function = "qup10";
> - };
> -
> - config {
> - pins = "gpio9", "gpio10";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c10_default: qup-i2c10-default-state {
> + pins = "gpio9", "gpio10";
> + function = "qup10";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi10_default: qup-spi10-default {
> + qup_spi10_default: qup-spi10-default-state {
> pins = "gpio9", "gpio10", "gpio11", "gpio12";
> function = "qup10";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c11_default: qup-i2c11-default {
> - mux {
> - pins = "gpio94", "gpio95";
> - function = "qup11";
> - };
> -
> - config {
> - pins = "gpio94", "gpio95";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c11_default: qup-i2c11-default-state {
> + pins = "gpio94", "gpio95";
> + function = "qup11";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi11_default: qup-spi11-default {
> + qup_spi11_default: qup-spi11-default-state {
> pins = "gpio92", "gpio93", "gpio94", "gpio95";
> function = "qup11";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c12_default: qup-i2c12-default {
> - mux {
> - pins = "gpio83", "gpio84";
> - function = "qup12";
> - };
> -
> - config {
> - pins = "gpio83", "gpio84";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c12_default: qup-i2c12-default-state {
> + pins = "gpio83", "gpio84";
> + function = "qup12";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi12_default: qup-spi12-default {
> + qup_spi12_default: qup-spi12-default-state {
> pins = "gpio83", "gpio84", "gpio85", "gpio86";
> function = "qup12";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c13_default: qup-i2c13-default {
> - mux {
> - pins = "gpio43", "gpio44";
> - function = "qup13";
> - };
> -
> - config {
> - pins = "gpio43", "gpio44";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c13_default: qup-i2c13-default-state {
> + pins = "gpio43", "gpio44";
> + function = "qup13";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi13_default: qup-spi13-default {
> + qup_spi13_default: qup-spi13-default-state {
> pins = "gpio43", "gpio44", "gpio45", "gpio46";
> function = "qup13";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c14_default: qup-i2c14-default {
> - mux {
> - pins = "gpio47", "gpio48";
> - function = "qup14";
> - };
> -
> - config {
> - pins = "gpio47", "gpio48";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c14_default: qup-i2c14-default-state {
> + pins = "gpio47", "gpio48";
> + function = "qup14";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi14_default: qup-spi14-default {
> + qup_spi14_default: qup-spi14-default-state {
> pins = "gpio47", "gpio48", "gpio49", "gpio50";
> function = "qup14";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c15_default: qup-i2c15-default {
> - mux {
> - pins = "gpio27", "gpio28";
> - function = "qup15";
> - };
> -
> - config {
> - pins = "gpio27", "gpio28";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c15_default: qup-i2c15-default-state {
> + pins = "gpio27", "gpio28";
> + function = "qup15";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi15_default: qup-spi15-default {
> + qup_spi15_default: qup-spi15-default-state {
> pins = "gpio27", "gpio28", "gpio29", "gpio30";
> function = "qup15";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c16_default: qup-i2c16-default {
> - mux {
> - pins = "gpio86", "gpio85";
> - function = "qup16";
> - };
> -
> - config {
> - pins = "gpio86", "gpio85";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c16_default: qup-i2c16-default-state {
> + pins = "gpio86", "gpio85";
> + function = "qup16";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi16_default: qup-spi16-default {
> + qup_spi16_default: qup-spi16-default-state {
> pins = "gpio83", "gpio84", "gpio85", "gpio86";
> function = "qup16";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c17_default: qup-i2c17-default {
> - mux {
> - pins = "gpio55", "gpio56";
> - function = "qup17";
> - };
> -
> - config {
> - pins = "gpio55", "gpio56";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c17_default: qup-i2c17-default-state {
> + pins = "gpio55", "gpio56";
> + function = "qup17";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi17_default: qup-spi17-default {
> + qup_spi17_default: qup-spi17-default-state {
> pins = "gpio55", "gpio56", "gpio57", "gpio58";
> function = "qup17";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c18_default: qup-i2c18-default {
> - mux {
> - pins = "gpio23", "gpio24";
> - function = "qup18";
> - };
> -
> - config {
> - pins = "gpio23", "gpio24";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c18_default: qup-i2c18-default-state {
> + pins = "gpio23", "gpio24";
> + function = "qup18";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi18_default: qup-spi18-default {
> + qup_spi18_default: qup-spi18-default-state {
> pins = "gpio23", "gpio24", "gpio25", "gpio26";
> function = "qup18";
> drive-strength = <6>;
> bias-disable;
> };
>
> - qup_i2c19_default: qup-i2c19-default {
> - mux {
> - pins = "gpio57", "gpio58";
> - function = "qup19";
> - };
> -
> - config {
> - pins = "gpio57", "gpio58";
> - drive-strength = <0x02>;
> - bias-disable;
> - };
> + qup_i2c19_default: qup-i2c19-default-state {
> + pins = "gpio57", "gpio58";
> + function = "qup19";
> + drive-strength = <2>;
> + bias-disable;
> };
>
> - qup_spi19_default: qup-spi19-default {
> + qup_spi19_default: qup-spi19-default-state {
> pins = "gpio55", "gpio56", "gpio57", "gpio58";
> function = "qup19";
> drive-strength = <6>;
> bias-disable;
> };
>
> - pcie0_default_state: pcie0-default {
> - perst {
> + pcie0_default_state: pcie0-default-state {
> + perst-pins {
> pins = "gpio35";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-down;
> };
>
> - clkreq {
> + clkreq-pins {
> pins = "gpio36";
> function = "pci_e0";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - wake {
> + wake-pins {
> pins = "gpio37";
> function = "gpio";
> drive-strength = <2>;
> @@ -2699,22 +2579,22 @@ wake {
> };
> };
>
> - pcie1_default_state: pcie1-default {
> - perst {
> + pcie1_default_state: pcie1-default-state {
> + perst-pins {
> pins = "gpio102";
> function = "gpio";
> drive-strength = <2>;
> bias-pull-down;
> };
>
> - clkreq {
> + clkreq-pins {
> pins = "gpio103";
> function = "pci_e1";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> - wake {
> + wake-pins {
> pins = "gpio104";
> function = "gpio";
> drive-strength = <2>;

Next message: Corey Minyard: "Re: [PATCH 1/3] ipmi: fix msg stack when IPMI is disconnected"
Previous message: patchwork-bot+bluetooth: "Re: [PATCH v3] Bluetooth: btusb: Introduce generic USB reset"
In reply to: Krzysztof Kozlowski: "Re: [PATCH 1/2] arm64: dts: qcom: sm8150: align TLMM pin configuration with DT schema"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]