Re: [PATCH V2 2/3] dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml

[Chunyan Zhang]

On Fri, 30 Sept 2022 at 19:09, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 30/09/2022 10:24, Chunyan Zhang wrote:
> > From: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
> >
> > Convert the Unisoc EIC controller binding to DT schema format.
> > Update the maxItems of 'reg' property, since the current gpio-eic-sprd
> > driver supports 3 reg items. Also remove three redundant examples.
> >
> > Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
> > ---
> >  .../bindings/gpio/gpio-eic-sprd.txt           |  97 --------------
> >  .../bindings/gpio/sprd,gpio-eic.yaml          | 119 ++++++++++++++++++
> >  2 files changed, 119 insertions(+), 97 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
> >  create mode 100644 Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml

[snip]

> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        eic_debounce: gpio@40210000 {
> > +            compatible = "sprd,sc9860-eic-debounce";
> > +            reg = <0 0x40210000 0 0x80>;
> > +            gpio-controller;
> > +            #gpio-cells = <2>;
> > +            interrupt-controller;
> > +            #interrupt-cells = <2>;
> > +            interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> > +        };
> > +    };
> > +
> > +    sc2730_pmic {
>
> If you insisted to keep it, at least should be correct, so just pmic.
>
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        pmic_eic: gpio@300 {
>
> It's exactly the same example as above - all same properties. Drop it or
> bring some differences.

The differences are on #address-cells and #size-cells.

Thanks for the review,
Chunyan