[PATCH AUTOSEL 4.19 20/25] wifi: rt2x00: set SoC wmac clock register
From: Sasha Levin
Date: Sun Oct 09 2022 - 18:57:23 EST
From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ]
Instead of using the default value 33 (pci), set US_CYC_CNT init based
on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.
Reported-by: Serge Vasilugin <vasilugin@xxxxxxxxx>
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Acked-by: Stanislaw Gruszka <stf_xl@xxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxx>
Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@xxxxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../net/wireless/ralink/rt2x00/rt2800lib.c | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index b8224b215532..9469517ac65f 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -5570,6 +5570,27 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125);
rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
+ } else if (rt2x00_is_soc(rt2x00dev)) {
+ struct clk *clk = clk_get_sys("bus", NULL);
+ int rate;
+
+ if (IS_ERR(clk)) {
+ clk = clk_get_sys("cpu", NULL);
+
+ if (IS_ERR(clk)) {
+ rate = 125;
+ } else {
+ rate = clk_get_rate(clk) / 3000000;
+ clk_put(clk);
+ }
+ } else {
+ rate = clk_get_rate(clk) / 1000000;
+ clk_put(clk);
+ }
+
+ reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
+ rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate);
+ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
}
reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);
--
2.35.1