[PATCH] thermal/governors: Fix cooling device setting cooling state failure

[Qibo Huang]

Because the __thermal_cdev_update function traverses the
cooling_device->thermal_instances list to obtain the maximum
target state, and then the cooling device sets the maximum
cooling state. However, the power_actor_set_power function
only updates the target value of thermal_zone->thermal_instances
to the target state, and does not update the target value of
cooling_device->thermal_instances, resulting in the target
being 0 all the time.

Signed-off-by: Qibo Huang <huangqibo.tech@xxxxxxxxx>
---
 drivers/thermal/gov_power_allocator.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 2d1aeaba38a8..8a6a08906dd4 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -293,6 +293,7 @@ power_actor_set_power(struct thermal_cooling_device *cdev,
 		      struct thermal_instance *instance, u32 power)
 {
 	unsigned long state;
+	struct thermal_instance *cdev_instance;
 	int ret;
 
 	ret = cdev->ops->power2state(cdev, power, &state);
@@ -300,6 +301,10 @@ power_actor_set_power(struct thermal_cooling_device *cdev,
 		return ret;
 
 	instance->target = clamp_val(state, instance->lower, instance->upper);
+	list_for_each_entry(cdev_instance, &cdev->thermal_instances, cdev_node) {
+		if (cdev_instance->tz->id == instance->tz->id)
+			cdev_instance->target = state;
+	}
 	mutex_lock(&cdev->lock);
 	__thermal_cdev_update(cdev);
 	mutex_unlock(&cdev->lock);
-- 
2.37.1