Re: [PATCH v2 1/3] dt-bindings: hwmon: fan: Add fan binding to schema

[Naresh Solanki]

Hi Guenter,

fan-common is intended for fan properties. i.e., those derived from
fan datasheets.
For min-rpm, some fans have minimum non zero rpm like 1900rpm below which
the fan cannot run.

But not sure what the best approach is but for chip specific setting
it should be in
chip specific DT schema. Suggestion?

Regards,
Naresh Solanki



9elements GmbH, Kortumstraße 19-21, 44787 Bochum, Germany
Email:  naresh.solanki@xxxxxxxxxxxxx
Mobile:  +91 9538631477

Sitz der Gesellschaft: Bochum
Handelsregister: Amtsgericht Bochum, HRB 17519
Geschäftsführung: Sebastian Deutsch, Eray Basar

Datenschutzhinweise nach Art. 13 DSGVO

On Tue, 11 Oct 2022 at 20:30, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On 10/11/22 03:47, Naresh Solanki wrote:
> > Add common fan properties bindings to a schema.
> >
> > Bindings for fan controllers can reference the common schema for the
> > fan
> >
> > child nodes:
> >
> >    patternProperties:
> >      "^fan@[0-2]":
> >        type: object
> >        allOf:
> >          - $ref: fan-common.yaml#
> >
> > Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
> > ---
> >   .../devicetree/bindings/hwmon/fan-common.yaml | 80 +++++++++++++++++++
> >   1 file changed, 80 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/hwmon/fan-common.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/fan-common.yaml b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
> > new file mode 100644
> > index 000000000000..abc8375da646
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
> > @@ -0,0 +1,80 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Common fan properties
> > +
> > +maintainers:
> > +  - Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
> > +
> > +properties:
> > +  max-rpm:
> > +    description:
> > +      Max RPM supported by fan
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +  pulse-per-revolution:
> > +    description:
> > +      The number of pulse from fan sensor per revolution.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +  target-rpm:
> > +    description:
> > +      Target RPM the fan should be configured during driver probe.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +  pwm-frequency:
> > +    description:
> > +      PWM frequency for fan.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +  pwm-polarity-inverse:
> > +    description:
> > +      PWM polarity for fan.
> > +    type: boolean
> > +
> > +  label:
> > +    description:
> > +      Optional fan label
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +
>
> Same question as before:
>
> How are additional common bindings, such as min-rpm or fan-divider
> (also sometimes called fan-prescale) supposed to be handled ?
> As additions to this schema, or individually in each driver needing/
> using them ?
>
> Thanks,
> Guenter