Re: [EXTERNAL] Re: [PATCH v6 1/5] dt-bindings: remoteproc: Add PRU consumer bindings

[Md Danish Anwar]

Hi Krzysztof,


On 12/10/22 20:54, Krzysztof Kozlowski wrote:
> On 12/10/2022 07:44, MD Danish Anwar wrote:
>> From: Suman Anna <s-anna@xxxxxx>
>>
>> Add a YAML binding document for PRU consumers. The binding includes
> 
> Add a DT schema binding for ...
> 

Sure I'll change it to that.

> Second thing: where is a user of this common binding? How do you apply
> this schema to anything?
> 

This dt binding will be included in 'ti,icssg-prueth.yaml' which is introduced
in the series [1].

in 'ti,icssg-prueth.yaml' file --
allOf:
  - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#

The consumer can apply the dt schema 'ti,icssg-prueth.yaml' and this schema
will be applied with that as this schema is included in 'ti,icssg-prueth.yaml'.

>> all the common properties that can be used by different PRU consumer
>> or application nodes and supported by the PRU remoteproc driver.
>> These are used to configure the PRU hardware for specific user
>> applications.
>>
>> The application nodes themselves should define their own bindings.
>>
>> Co-developed-by: Tero Kristo <t-kristo@xxxxxx>
>> Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
>> Signed-off-by: Suman Anna <s-anna@xxxxxx>
>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
>> Signed-off-by: Puranjay Mohan <p-mohan@xxxxxx>
>> Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx>
>> ---
>>  .../bindings/remoteproc/ti,pru-consumer.yaml  | 132 ++++++++++++++++++
>>  1 file changed, 132 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
>> new file mode 100644
>> index 000000000000..16be98b7d600
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
>> @@ -0,0 +1,132 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Common TI PRU Consumer Binding
>> +
>> +maintainers:
>> +  - Suman Anna <s-anna@xxxxxx>
>> +
>> +description: |
>> +  A PRU application/consumer/user node typically uses one or more PRU device
>> +  nodes to implement a PRU application/functionality. Each application/client
>> +  node would need a reference to at least a PRU node, and optionally define
>> +  some properties needed for hardware/firmware configuration. The below
>> +  properties are a list of common properties supported by the PRU remoteproc
>> +  infrastructure.
>> +
>> +  The application nodes shall define their own bindings like regular platform
>> +  devices, so below are in addition to each node's bindings.
>> +
>> +properties:
>> +  ti,prus:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>> +    description: phandles to the PRU, RTU or Tx_PRU nodes used
>> +    minItems: 1
>> +    maxItems: 6
>> +    items:
>> +      maxItems: 1
>> +
>> +  firmware-name:
>> +    $ref: /schemas/types.yaml#/definitions/string-array
>> +    minItems: 1
>> +    maxItems: 6
>> +    description: |
>> +      firmwares for the PRU cores, the default firmware for the core from
>> +      the PRU node will be used if not provided. The firmware names should
>> +      correspond to the PRU cores listed in the 'ti,prus' property
>> +
>> +  ti,pruss-gp-mux-sel:
>> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>> +    minItems: 1
>> +    maxItems: 6
>> +    items:
>> +      enum: [0, 1, 2, 3, 4]
>> +    description: |
>> +      array of values for the GP_MUX_SEL under PRUSS_GPCFG register for a PRU.
>> +      This selects the internal muxing scheme for the PRU instance. Values
>> +      should correspond to the PRU cores listed in the 'ti,prus' property. The
>> +      GP_MUX_SEL setting is a per-slice setting (one setting for PRU0, RTU0,
>> +      and Tx_PRU0 on K3 SoCs). Use the same value for all cores within the
>> +      same slice in the associative array. If the array size is smaller than
>> +      the size of 'ti,prus' property, the default out-of-reset value (0) for the
>> +      PRU core is used.
>> +
>> +required:
>> +  - ti,prus
>> +
>> +additionalProperties: true
>> +
>> +examples:
>> +  - |
>> +    /* PRU application node full example */
>> +    icssg2_eth: icssg2-eth {
>> +      compatible = "ti,am654-icssg-prueth";
>> +      pinctrl-names = "default";
>> +      pinctrl-0 = <&icssg2_rgmii_pins_default>;
>> +      sram = <&msmc_ram>;
>> +      ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
>> +        <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
> 
> Fix alignment. In other places as well.
> 

Sure, I'll work on this.

>> +      firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
>> +          "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
>> +          "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
>> +          "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
>> +          "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
>> +          "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
>> +
> 
> Best regards,
> Krzysztof
> 

[1] https://lore.kernel.org/all/20220531095108.21757-2-p-mohan@xxxxxx/

Thanks and Regards,
Danish.