Re: [PATCH v4 1/3] dt-bindings: net: marvell,pp2: convert to json-schema

From: Rob Herring
Date: Thu Oct 13 2022 - 16:52:13 EST


On Thu, Oct 13, 2022 at 06:51:32PM +0200, Michał Grzelak wrote:
> Convert the marvell,pp2 bindings from text to proper schema.
>
> Move 'marvell,system-controller' and 'dma-coherent' properties from
> port up to the controller node, to match what is actually done in DT.
>
> Rename all subnodes to match "^(ethernet-)?port@[0-9]+$" and deprecate
> port-id in favour of 'reg'.
>
> Signed-off-by: Michał Grzelak <mig@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/net/marvell,pp2.yaml | 288 ++++++++++++++++++
> .../devicetree/bindings/net/marvell-pp2.txt | 141 ---------
> MAINTAINERS | 2 +-
> 3 files changed, 289 insertions(+), 142 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/marvell,pp2.yaml
> delete mode 100644 Documentation/devicetree/bindings/net/marvell-pp2.txt
>
> diff --git a/Documentation/devicetree/bindings/net/marvell,pp2.yaml b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
> new file mode 100644
> index 000000000000..c4b27338d740
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
> @@ -0,0 +1,288 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/marvell,pp2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller
> +
> +maintainers:
> + - Marcin Wojtas <mw@xxxxxxxxxxxx>
> + - Russell King <linux@xxxxxxxxxxxx>
> +
> +description: |
> + Marvell Armada 375 Ethernet Controller (PPv2.1)
> + Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
> + Marvell CN913X Ethernet Controller (PPv2.3)
> +
> +properties:
> + compatible:
> + enum:
> + - marvell,armada-375-pp2
> + - marvell,armada-7k-pp22
> +
> + reg:
> + minItems: 3
> + maxItems: 4
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + clocks:
> + minItems: 2
> + items:
> + - description: main controller clock
> + - description: GOP clock
> + - description: MG clock
> + - description: MG Core clock
> + - description: AXI clock
> +
> + clock-names:
> + minItems: 2
> + items:
> + - const: pp_clk
> + - const: gop_clk
> + - const: mg_clk
> + - const: mg_core_clk
> + - const: axi_clk
> +
> + dma-coherent: true
> +
> + marvell,system-controller:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: a phandle to the system controller.
> +
> +patternProperties:
> + '^(ethernet-)?port@[0-9]+$':

unit-addresses are hex. Though if there are 10 ports, then drop the '+'.

> + type: object
> + description: subnode for each ethernet port.
> + $ref: ethernet-controller.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + reg:
> + $ref: /schemas/types.yaml#/definitions/uint32

'reg' is standard property and already has a type, so drop. But you
should add:

maximum: 9

(assuming the range is 0-9)

> + description: ID of the port from the MAC point of view.
> +
> + interrupts:
> + minItems: 1
> + maxItems: 10
> + description: interrupt(s) for the port
> +
> + interrupt-names:
> + minItems: 1
> + items:
> + - const: hif0
> + - const: hif1
> + - const: hif2
> + - const: hif3
> + - const: hif4
> + - const: hif5
> + - const: hif6
> + - const: hif7
> + - const: hif8
> + - const: link
> +
> + description: >
> + if more than a single interrupt for is given, must be the
> + name associated to the interrupts listed. Valid names are:
> + "hifX", with X in [0..8], and "link". The names "tx-cpu0",
> + "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
> + for backward compatibility but shouldn't be used for new
> + additions.
> +
> + phys:
> + $ref: /schemas/phy/phy-consumer.yaml#/properties/phys

Don't need a type. Need to define how many entries and what each one is
if more than 1. For 1, just 'maxItems: 1'.

> + description: Generic PHY, providing serdes lanes.
> +
> + port-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + deprecated: true
> + description: >
> + ID of the port from the MAC point of view.
> + Legacy binding for backward compatibility.
> +
> + marvell,loopback:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: port is loopback mode.
> +
> + gop-port-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: >
> + only for marvell,armada-7k-pp22, ID of the port from the
> + GOP (Group Of Ports) point of view. This ID is used to index the
> + per-port registers in the second register area.
> +
> + required:
> + - reg
> + - interrupts
> + - port-id
> + - phy-mode

Presumably the h/w doesn't support every possible mode listed in
ethernet-controller.yaml, so you should limit it in this binding.

> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + const: marvell,armada-7k-pp22
> + then:
> + properties:
> + reg:
> + items:
> + - description: Packet Processor registers
> + - description: Networking interfaces registers
> + - description: CM3 address space used for TX Flow Control
> +
> + clocks:
> + minItems: 5
> +
> + clock-names:
> + minItems: 5
> +
> + patternProperties:
> + '^(ethernet-)?port@[0-9]+$':
> + required:
> + - gop-port-id
> +
> + required:
> + - marvell,system-controller
> + else:
> + properties:
> + reg:
> + items:
> + - description: Packet Processor registers
> + - description: LMS registers
> + - description: Register area per eth0
> + - description: Register area per eth1
> +
> + clocks:
> + maxItems: 2
> +
> + clock-names:
> + maxItems: 2
> +
> + patternProperties:
> + '^(ethernet-)?port@[0-9]+$':
> + properties:
> + gop-port-id: false
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + // For Armada 375 variant
> + #include <dt-bindings/interrupt-controller/mvebu-icu.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + ethernet@f0000 {
> + #address-cells = <1>;

Use 4 space indentation for examples.

> + #size-cells = <0>;
> + compatible = "marvell,armada-375-pp2";
> + reg = <0xf0000 0xa000>,
> + <0xc0000 0x3060>,
> + <0xc4000 0x100>,
> + <0xc5000 0x100>;
> + clocks = <&gateclk 3>, <&gateclk 19>;
> + clock-names = "pp_clk", "gop_clk";
> +
> + ethernet-port@0 {
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0>;
> + port-id = <0>; /* For backward compatibility. */
> + phy = <&phy0>;
> + phy-mode = "rgmii-id";
> + };
> +
> + ethernet-port@1 {
> + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <1>;
> + port-id = <1>; /* For backward compatibility. */
> + phy = <&phy3>;
> + phy-mode = "gmii";
> + };
> + };
> +
> + - |
> + // For Armada 7k/8k and Cn913x variants
> + #include <dt-bindings/interrupt-controller/mvebu-icu.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + ethernet@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "marvell,armada-7k-pp22";
> + reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
> + clocks = <&cp0_clk 1 3>, <&cp0_clk 1 9>,
> + <&cp0_clk 1 5>, <&cp0_clk 1 6>, <&cp0_clk 1 18>;
> + clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
> + marvell,system-controller = <&cp0_syscon0>;
> +
> + ethernet-port@0 {
> + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
> + "hif5", "hif6", "hif7", "hif8", "link";
> + phy-mode = "10gbase-r";
> + phys = <&cp0_comphy4 0>;
> + reg = <0>;
> + port-id = <0>; /* For backward compatibility. */
> + gop-port-id = <0>;
> + };
> +
> + ethernet-port@1 {
> + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
> + "hif5", "hif6", "hif7", "hif8", "link";
> + phy-mode = "rgmii-id";
> + reg = <1>;
> + port-id = <1>; /* For backward compatibility. */
> + gop-port-id = <2>;
> + };
> +
> + ethernet-port@2 {
> + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
> + "hif5", "hif6", "hif7", "hif8", "link";
> + phy-mode = "2500base-x";
> + managed = "in-band-status";
> + phys = <&cp0_comphy5 2>;
> + sfp = <&sfp_eth3>;
> + reg = <2>;
> + port-id = <2>; /* For backward compatibility. */
> + gop-port-id = <3>;
> + };
> + };