[PATCH v2] can: mcan: Add support for handling DLEC error on CAN FD

[Vivek Yadav]

When a frame in CAN FD format has reached the data phase, the next
CAN event (error or valid frame) will be shown in DLEC.

Utilizes the dedicated flag (Data Phase Last Error Code: DLEC flag) to
determine the type of last error that occurred in the data phase
of a CAN FD frame and handle the bus errors.

Signed-off-by: Vivek Yadav <vivek.2311@xxxxxxxxxxx>
---
This patch is dependent on following patch from Marc:
[1]: https://lore.kernel.org/all/20221012074205.691384-1-mkl@xxxxxxxxxxxxxx/

 drivers/net/can/m_can/m_can.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 18a138fdfa66..8cff1f274aab 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -156,6 +156,7 @@ enum m_can_reg {
 #define PSR_EW		BIT(6)
 #define PSR_EP		BIT(5)
 #define PSR_LEC_MASK	GENMASK(2, 0)
+#define PSR_DLEC_MASK   GENMASK(8, 10)
 
 /* Interrupt Register (IR) */
 #define IR_ALL_INT	0xffffffff
@@ -876,8 +877,16 @@ static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,
 	if (cdev->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) {
 		u8 lec = FIELD_GET(PSR_LEC_MASK, psr);
 
-		if (is_lec_err(lec))
+		if (is_lec_err(lec)) {
 			work_done += m_can_handle_lec_err(dev, lec);
+		} else {
+			u8 dlec = FIELD_GET(PSR_DLEC_MASK, psr);
+
+			if (is_lec_err(dlec)) {
+				netdev_dbg(dev, "Data phase error detected\n");
+				work_done += m_can_handle_lec_err(dev, dlec);
+			}
+		}
 	}
 
 	/* handle protocol errors in arbitration phase */
-- 
2.17.1