Re: [PATCH v8 2/3] mmc: sdhci-tegra: Add support to program MC stream ID
From: Ulf Hansson
Date: Fri Oct 14 2022 - 09:38:58 EST
On Fri, 14 Oct 2022 at 09:25, Prathamesh Shete <pshete@xxxxxxxxxx> wrote:
>
> SMMU clients are supposed to program stream ID from
> their respective address spaces instead of MC override.
> Define NVQUIRK_PROGRAM_STREAMID and use it to program
> SMMU stream ID from the SDMMC client address space.
>
> Signed-off-by: Aniruddha TVS Rao <anrao@xxxxxxxxxx>
> Signed-off-by: Prathamesh Shete <pshete@xxxxxxxxxx>
> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> drivers/mmc/host/sdhci-tegra.c | 42 ++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index a6c5bbae77b4..0cd7c3f7e6f4 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -25,6 +25,10 @@
> #include <linux/mmc/slot-gpio.h>
> #include <linux/gpio/consumer.h>
> #include <linux/ktime.h>
> +#ifdef CONFIG_IOMMU_API
This ifdef can be removed, the compiler should sort this out for us.
> +#include <linux/iommu.h>
> +#include <linux/bitops.h>
> +#endif
>
> #include <soc/tegra/common.h>
>
> @@ -94,6 +98,8 @@
> #define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec
> #define SDHCI_TEGRA_AUTO_CAL_ACTIVE BIT(31)
>
> +#define SDHCI_TEGRA_CIF2AXI_CTRL_0 0x1fc
> +
> #define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0)
> #define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1)
> #define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2)
> @@ -121,6 +127,7 @@
> #define NVQUIRK_HAS_TMCLK BIT(10)
>
> #define NVQUIRK_HAS_ANDROID_GPT_SECTOR BIT(11)
> +#define NVQUIRK_PROGRAM_STREAMID BIT(12)
>
> /* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
> #define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000
> @@ -177,6 +184,9 @@ struct sdhci_tegra {
> bool enable_hwcq;
> unsigned long curr_clk_rate;
> u8 tuned_tap_delay;
> +#ifdef CONFIG_IOMMU_API
> + u32 streamid;
> +#endif
> };
>
> static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
> @@ -1564,6 +1574,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra234 = {
> NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
> NVQUIRK_ENABLE_SDR50 |
> NVQUIRK_ENABLE_SDR104 |
> + NVQUIRK_PROGRAM_STREAMID |
> NVQUIRK_HAS_TMCLK,
> .min_tap_delay = 95,
> .max_tap_delay = 111,
> @@ -1630,6 +1641,33 @@ static int sdhci_tegra_add_host(struct sdhci_host *host)
> return ret;
> }
>
> +/* Program MC streamID for DMA transfers */
> +#ifdef CONFIG_IOMMU_API
> +static void program_stream_id(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
> + struct iommu_fwspec *fwspec;
> +
> + if (tegra_host->soc_data->nvquirks & NVQUIRK_PROGRAM_STREAMID) {
> + fwspec = dev_iommu_fwspec_get(dev);
> + if (!fwspec) {
> + dev_warn(mmc_dev(host->mmc),
> + "iommu fwspec is NULL, continue without stream ID\n");
> + } else {
> + tegra_host->streamid = fwspec->ids[0] & 0xff;
> + tegra_sdhci_writel(host, tegra_host->streamid |
> + FIELD_PREP(GENMASK(15, 8),
> + tegra_host->streamid),
> + SDHCI_TEGRA_CIF2AXI_CTRL_0);
> + }
> + }
> +}
> +#else
> +static void program_stream_id(struct device *dev) { }
> +#endif
> +
> static int sdhci_tegra_probe(struct platform_device *pdev)
> {
> const struct sdhci_tegra_soc_data *soc_data;
> @@ -1775,6 +1813,8 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
> if (rc)
> goto err_add_host;
>
> + program_stream_id(&pdev->dev);
> +
> return 0;
>
> err_add_host:
> @@ -1871,6 +1911,8 @@ static int sdhci_tegra_resume(struct device *dev)
> if (ret)
> return ret;
>
> + program_stream_id(dev);
> +
> ret = sdhci_resume_host(host);
> if (ret)
> goto disable_clk;
> --
> 2.17.1
>
Other than the minor nitpick, this looks good to me!
Kind regards
Uffe