Re: [RFC PATCH] x86/sev-es: Include XSS value in GHCB CPUID request

From: Sean Christopherson
Date: Fri Oct 14 2022 - 16:27:29 EST


On Wed, Oct 12, 2022, John Allen wrote:
> When a guest issues a cpuid instruction for Fn0000000D_x0B
> (CetUserOffset), KVM will intercept and need to access the guest

s/KVM will/the hypervisor may

> XSS value.

Heh, "need" is debatable.

> For SEV-ES, this is encrypted and needs to be
> included in the GHCB to be visible to the hypervisor. The rdmsr
> instruction needs to be called directly as the code may be used in early
> boot in which case the rdmsr wrappers should be avoided as they are
> incompatible with the decompression boot phase.
>
> Signed-off-by: John Allen <john.allen@xxxxxxx>
> ---
> This patch is logically part of the SVM guest shadow stack support series seen
> here:
> https://lore.kernel.org/all/20221012203910.204793-1-john.allen@xxxxxxx/
>
> Sending this patch separately from the main series as it should apply to the
> tip tree as opposed to the kvm tree as this patch is related to guest kernel
> support.
> ---
> arch/x86/kernel/sev-shared.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/x86/kernel/sev-shared.c b/arch/x86/kernel/sev-shared.c
> index 3a5b0c9c4fcc..34469fac03f0 100644
> --- a/arch/x86/kernel/sev-shared.c
> +++ b/arch/x86/kernel/sev-shared.c
> @@ -887,6 +887,21 @@ static enum es_result vc_handle_cpuid(struct ghcb *ghcb,
> /* xgetbv will cause #GP - use reset value for xcr0 */
> ghcb_set_xcr0(ghcb, 1);
>
> + if (has_cpuflag(X86_FEATURE_SHSTK) && regs->ax == 0xd) {

IIRC, XCR0 and XSS are only needed for sub-leafs 0 and 1, i.e. this and the code
above don't need to expose XCR0/XSS to the host for ECX > 1.

FWIW, I think it's ridiculous that the guest willingly exposes state to the host,
it's not _that_ difficult to do the math in the guest.

> + unsigned long lo, hi;
> + u64 xss;
> +
> + /*
> + * Since vc_handle_cpuid may be used during early boot, the
> + * rdmsr wrappers are incompatible and should not be used.
> + * Invoke the instruction directly.
> + */
> + asm volatile("rdmsr" : "=a" (lo), "=d" (hi)
> + : "c" (MSR_IA32_XSS));

Doesn't __rdmsr() do what you want? But even that seems unnecessary, isn't the
current XSS available in xfeatures_mask_supervisor()?

> + xss = (hi << 32) | lo;
> + ghcb_set_xss(ghcb, xss);
> + }
> +
> ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_CPUID, 0, 0);
> if (ret != ES_OK)
> return ret;
> --
> 2.34.3
>