[PATCH v5 27/34] dt-bindings: pinctrl: qcom,qcm2290: use common TLMM schema

[Krzysztof Kozlowski]

Reference common Qualcomm TLMM pin controller schema, to bring common
properties, other pinctrl schemas and additional checks, like function
required only for GPIOs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

---

Changes since v4:
1. Drop drive-strength (included by common TLMM node).

Changes since v3:
1. Drop properties and required items which are already provided by
   common TLMM schema.
---
 .../pinctrl/qcom,qcm2290-pinctrl.yaml         | 43 +++----------------
 1 file changed, 6 insertions(+), 37 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
index 5324b61eb4f7..ae73e3d45bbe 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
@@ -20,28 +20,12 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
+  "#gpio-cells": true
+  gpio-ranges: true
   wakeup-parent: true
 
 #PIN CONFIGURATION NODES
@@ -97,20 +81,11 @@ patternProperties:
                 uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
                 vsense_trigger, wlan1_adc0, wlan1_adc1 ]
 
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      drive-strength: true
       output-high: true
-
       output-low: true
 
     required:
@@ -119,17 +94,11 @@ patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
-- 
2.34.1