Re: [RESEND PATCH V2 1/9] ACPI: CPPC: Add AMD pstate energy performance preference cppc control

[Huang Rui]

On Tue, Oct 11, 2022 at 12:22:40AM +0800, Yuan, Perry wrote:
> Add the EPP(Energy Performance Preference) support for the
> AMD SoCs without the dedicated CPPC MSR, those SoCs need to add this
> cppc acpi functions to update EPP values and desired perf value.
> 

The energy performance preference register is actually defined by ACPI, so
it's not the AMD specific stuff. It's correct to define a general function
in cppc_acpi lib not only for AMD processors. We won't need to mention "AMD
P-State" energy performance preference whatever it is implemented with MSR
or SystemMemory in the subject and commit message here.

> In order to get EPP worked, cppc_get_epp_caps() will query EPP preference
> value and cppc_set_epp_perf() will set EPP new value.
> Before the EPP works, pstate driver will use cppc_set_auto_epp() to
> enable EPP function from firmware firstly.
> 
> Signed-off-by: Perry Yuan <Perry.Yuan@xxxxxxx>
> ---
>  drivers/acpi/cppc_acpi.c | 128 ++++++++++++++++++++++++++++++++++++++-
>  include/acpi/cppc_acpi.h |  17 ++++++
>  2 files changed, 144 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> index 093675b1a1ff..b0e7817cb97f 100644
> --- a/drivers/acpi/cppc_acpi.c
> +++ b/drivers/acpi/cppc_acpi.c
> @@ -1365,6 +1365,132 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
>  }
>  EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
>  
> +/**
> + * cppc_get_epp_caps - Get the energy preference register value.
> + * @cpunum: CPU from which to get epp preference level.
> + * @perf_caps: Return address.
> + *
> + * Return: 0 for success, -EIO otherwise.
> + */
> +int cppc_get_epp_caps(int cpunum, struct cppc_perf_caps *perf_caps)
> +{
> +	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
> +	struct cpc_register_resource *energy_perf_reg;
> +	u64 energy_perf;
> +
> +	if (!cpc_desc) {
> +		pr_warn("No CPC descriptor for CPU:%d\n", cpunum);
> +		return -ENODEV;
> +	}
> +
> +	energy_perf_reg = &cpc_desc->cpc_regs[ENERGY_PERF];
> +
> +	if (!CPC_SUPPORTED(energy_perf_reg))
> +		pr_warn("energy perf reg update is unsupported!\n");
> +
> +	if (CPC_IN_PCC(energy_perf_reg)) {
> +		int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
> +		struct cppc_pcc_data *pcc_ss_data = NULL;
> +		int ret = 0;
> +
> +		if (pcc_ss_id < 0)
> +			return -EIO;

Should be -ENODEV. That means no subspace.

> +
> +		pcc_ss_data = pcc_data[pcc_ss_id];
> +
> +		down_write(&pcc_ss_data->pcc_lock);
> +
> +		if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0) {
> +			cpc_read(cpunum, energy_perf_reg, &energy_perf);
> +			perf_caps->energy_perf = energy_perf;
> +		} else {
> +			ret = -EIO;
> +		}
> +
> +		up_write(&pcc_ss_data->pcc_lock);
> +
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(cppc_get_epp_caps);
> +
> +int cppc_set_auto_epp(int cpu, bool enable)
> +{
> +	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
> +	struct cpc_register_resource *auto_sel_reg;
> +	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
> +	struct cppc_pcc_data *pcc_ss_data = NULL;
> +	int ret = -EINVAL;
> +
> +	if (!cpc_desc) {
> +		pr_warn("No CPC descriptor for CPU:%d\n", cpu);
> +		return -EINVAL;
> +	}
> +
> +	auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE];
> +
> +	if (CPC_IN_PCC(auto_sel_reg)) {
> +		if (pcc_ss_id < 0)
> +			return -EIO;

The same comment with above, should be -ENODEV.

> +
> +		ret = cpc_write(cpu, auto_sel_reg, enable);
> +		if (ret)
> +			return ret;
> +
> +		pcc_ss_data = pcc_data[pcc_ss_id];
> +
> +		down_write(&pcc_ss_data->pcc_lock);
> +		/* after writing CPC, transfer the ownership of PCC to platform */
> +		ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
> +		up_write(&pcc_ss_data->pcc_lock);
> +		return ret;
> +	}
> +
> +	return cpc_write(cpu, auto_sel_reg, enable);
> +}
> +EXPORT_SYMBOL_GPL(cppc_set_auto_epp);
> +
> +/*
> + * Set Energy Performance Preference Register value through
> + * Performance Controls Interface
> + */
> +int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
> +{
> +	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
> +	struct cpc_register_resource *epp_set_reg;
> +	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
> +	struct cppc_pcc_data *pcc_ss_data = NULL;
> +	int ret = -EINVAL;
> +
> +	if (!cpc_desc) {
> +		pr_warn("No CPC descriptor for CPU:%d\n", cpu);
> +		return -EINVAL;
> +	}
> +
> +	epp_set_reg = &cpc_desc->cpc_regs[ENERGY_PERF];
> +
> +	if (CPC_IN_PCC(epp_set_reg)) {
> +		if (pcc_ss_id < 0)
> +			return -EIO;

The same comment with above, should be -ENODEV.

> +
> +		ret = cpc_write(cpu, epp_set_reg, perf_ctrls->energy_perf);
> +		if (ret)
> +			return ret;
> +
> +		pcc_ss_data = pcc_data[pcc_ss_id];
> +
> +		down_write(&pcc_ss_data->pcc_lock);
> +		/* after writing CPC, transfer the ownership of PCC to platform */
> +		ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
> +		up_write(&pcc_ss_data->pcc_lock);
> +	}
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(cppc_set_epp_perf);
> +

Most of cppc_set_auto_epp and cppc_set_epp_perf implementations are
duplicated. Could you use one general function?

>  /**
>   * cppc_set_enable - Set to enable CPPC on the processor by writing the
>   * Continuous Performance Control package EnableRegister field.
> @@ -1400,7 +1526,7 @@ int cppc_set_enable(int cpu, bool enable)
>  		pcc_ss_data = pcc_data[pcc_ss_id];
>  
>  		down_write(&pcc_ss_data->pcc_lock);
> -		/* after writing CPC, transfer the ownership of PCC to platfrom */
> +		/* after writing CPC, transfer the ownership of PCC to platform */

There is no change with this line.

Thanks,
Ray

>  		ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
>  		up_write(&pcc_ss_data->pcc_lock);
>  		return ret;
> diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
> index c5614444031f..10d91aeedaca 100644
> --- a/include/acpi/cppc_acpi.h
> +++ b/include/acpi/cppc_acpi.h
> @@ -108,12 +108,14 @@ struct cppc_perf_caps {
>  	u32 lowest_nonlinear_perf;
>  	u32 lowest_freq;
>  	u32 nominal_freq;
> +	u32 energy_perf;
>  };
>  
>  struct cppc_perf_ctrls {
>  	u32 max_perf;
>  	u32 min_perf;
>  	u32 desired_perf;
> +	u32 energy_perf;
>  };
>  
>  struct cppc_perf_fb_ctrs {
> @@ -149,6 +151,9 @@ extern bool cpc_ffh_supported(void);
>  extern bool cpc_supported_by_cpu(void);
>  extern int cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val);
>  extern int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val);
> +extern int cppc_set_auto_epp(int cpu, bool enable);
> +extern int cppc_get_epp_caps(int cpunum, struct cppc_perf_caps *perf_caps);
> +extern int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls);
>  #else /* !CONFIG_ACPI_CPPC_LIB */
>  static inline int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
>  {
> @@ -202,6 +207,18 @@ static inline int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
>  {
>  	return -ENOTSUPP;
>  }
> +static inline int cppc_set_auto_epp(int cpu, bool enable)
> +{
> +	return -ENOTSUPP;
> +}
> +static inline int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
> +{
> +	return -ENOTSUPP;
> +}
> +static inline int cppc_get_epp_caps(int cpunum, struct cppc_perf_caps *perf_caps)
> +{
> +	return -ENOTSUPP;
> +}
>  #endif /* !CONFIG_ACPI_CPPC_LIB */
>  
>  #endif /* _CPPC_ACPI_H*/
> -- 
> 2.34.1
>