[PATCH v2 3/5] arm: dts: qcom: mdm9615: wp8548-mangoh-green: fix sx150xq node names and probe-reset property
From: Neil Armstrong
Date: Mon Oct 17 2022 - 06:23:51 EST
Fix the sx150xq node names to pinctrl and use the right probe-reset property.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 30a110984597..a8304769b509 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -116,7 +116,7 @@ i2c@4 {
#size-cells = <0>;
reg = <4>;
- gpioext0: gpio@3e {
+ gpioext0: pinctrl@3e {
/* GPIO Expander 0 Mapping :
* - 0: ARDUINO_RESET_Level shift
* - 1: BattChrgr_PG_N
@@ -142,7 +142,7 @@ gpioext0: gpio@3e {
interrupt-parent = <&gpioext1>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- probe-reset;
+ semtech,probe-reset;
gpio-controller;
interrupt-controller;
@@ -154,7 +154,7 @@ i2c@5 {
#size-cells = <0>;
reg = <5>;
- gpioext1: gpio@3f {
+ gpioext1: pinctrl@3f {
/* GPIO Expander 1 Mapping :
* - 0: GPIOEXP_INT1
* - 1: Battery detect
@@ -183,7 +183,7 @@ gpioext1: gpio@3f {
interrupt-parent = <&msmgpio>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- probe-reset;
+ semtech,probe-reset;
gpio-controller;
interrupt-controller;
@@ -195,7 +195,7 @@ i2c@6 {
#size-cells = <0>;
reg = <6>;
- gpioext2: gpio@70 {
+ gpioext2: pinctrl@70 {
/* GPIO Expander 2 Mapping :
* - 0: USB_HUB_INTn
* - 1: HUB_CONNECT
@@ -221,7 +221,7 @@ gpioext2: gpio@70 {
interrupt-parent = <&gpioext1>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
- probe-reset;
+ semtech,probe-reset;
gpio-controller;
interrupt-controller;
--
b4 0.10.1