[RFC v1 10/12] arm64: dts: mt7986: add mmc related device nodes
From: Frank Wunderlich
Date: Mon Oct 17 2022 - 06:42:35 EST
From: Sam Shih <sam.shih@xxxxxxxxxxxx>
This patch adds mmc support for MT7986.
Signed-off-by: Sam Shih <sam.shih@xxxxxxxxxxxx>
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 85 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 17 ++++
2 files changed, 102 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 7e339f5ded59..bcc0cdd5c328 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -24,6 +24,15 @@ memory@40000000 {
reg = <0 0x40000000 0 0x40000000>;
};
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -76,6 +85,24 @@ switch: switch@0 {
};
};
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ hs400-ds-delay = <0x14014>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
@@ -87,6 +114,64 @@ &pcie_phy {
};
&pio {
+ mmc0_pins_default: mmc0-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ mediatek,pull-up-adv = <1>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ mediatek,pull-down-adv = <2>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ mediatek,pull-down-adv = <2>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ mediatek,pull-up-adv = <1>; /* pull-up 10K */
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ mediatek,pull-up-adv = <1>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ mediatek,pull-down-adv = <2>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ mediatek,pull-down-adv = <2>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ mediatek,pull-up-adv = <1>; /* pull-up 10K */
+ };
+ };
+
pcie_pins: pcie-pins {
mux {
function = "pcie";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index aac129c6f295..f451788d93f9 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -285,6 +285,23 @@ ssusb: usb@11200000 {
status = "disabled";
};
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt7986-mmc";
+ reg = <0 0x11230000 0 0x1000>,
+ <0 0x11c20000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_INFRA_MSDC_CK>,
+ <&infracfg CLK_INFRA_MSDC_HCK_CK>,
+ <&infracfg CLK_INFRA_MSDC_66M_CK>,
+ <&infracfg CLK_INFRA_MSDC_133M_CK>;
+ clock-names = "source", "hclk", "axi_cg", "ahb_cg";
+ assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+ <&topckgen CLK_TOP_EMMC_250M_SEL>;
+ assigned-clock-parents = <&apmixedsys CLK_APMIXED_MPLL>,
+ <&topckgen CLK_TOP_NET1PLL_D5_D2>;
+ status = "disabled";
+ };
+
pcie: pcie@11280000 {
compatible = "mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
--
2.34.1