[PATCH] net: remove smc911x driver

[Arnd Bergmann]

From: Arnd Bergmann <arnd@xxxxxxxx>

This driver was used on Arm and SH machines until 2009, when the
last platforms moved to the smsc911x driver for the same hardware.

Time to retire this version.

Link: https://lore.kernel.org/netdev/1232010482-3744-1-git-send-email-steve.glendinning@xxxxxxxx/
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/net/ethernet/smsc/Kconfig   |   14 -
 drivers/net/ethernet/smsc/Makefile  |    1 -
 drivers/net/ethernet/smsc/smc911x.c | 2198 ---------------------------
 drivers/net/ethernet/smsc/smc911x.h |  901 -----------
 include/linux/smc911x.h             |   14 -
 5 files changed, 3128 deletions(-)
 delete mode 100644 drivers/net/ethernet/smsc/smc911x.c
 delete mode 100644 drivers/net/ethernet/smsc/smc911x.h
 delete mode 100644 include/linux/smc911x.h

diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 2524c907f386..5f22a8a4d27b 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -75,20 +75,6 @@ config EPIC100
 	  More specific information and updates are available from
 	  <http://www.scyld.com/network/epic100.html>.
 
-config SMC911X
-	tristate "SMSC LAN911[5678] support"
-	select CRC32
-	select MII
-	depends on (ARM || SUPERH || COMPILE_TEST)
-	help
-	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
-	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
-	  Say Y here if you want it compiled into the kernel.
-
-	  This driver is also available as a module. The module will be
-	  called smc911x.  If you want to compile it as a module, say M
-	  here and read <file:Documentation/kbuild/modules.rst>
-
 config SMSC911X
 	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
 	depends on HAS_IOMEM
diff --git a/drivers/net/ethernet/smsc/Makefile b/drivers/net/ethernet/smsc/Makefile
index 4105912b1629..1501fa364c13 100644
--- a/drivers/net/ethernet/smsc/Makefile
+++ b/drivers/net/ethernet/smsc/Makefile
@@ -8,5 +8,4 @@ obj-$(CONFIG_SMC91X) += smc91x.o
 obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
 obj-$(CONFIG_EPIC100) += epic100.o
 obj-$(CONFIG_SMSC9420) += smsc9420.o
-obj-$(CONFIG_SMC911X) += smc911x.o
 obj-$(CONFIG_SMSC911X) += smsc911x.o
diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
deleted file mode 100644
index 52ecfb461c41..000000000000
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ /dev/null
@@ -1,2198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * smc911x.c
- * This is a driver for SMSC's LAN911{5,6,7,8} single-chip Ethernet devices.
- *
- * Copyright (C) 2005 Sensoria Corp
- *	   Derived from the unified SMC91x driver by Nicolas Pitre
- *	   and the smsc911x.c reference driver by SMSC
- *
- * Arguments:
- *	 watchdog  = TX watchdog timeout
- *	 tx_fifo_kb = Size of TX FIFO in KB
- *
- * History:
- *	  04/16/05	Dustin McIntire		 Initial version
- */
-static const char version[] =
-	 "smc911x.c: v1.0 04-16-2005 by Dustin McIntire <dustin@xxxxxxxxxxxx>\n";
-
-/* Debugging options */
-#define ENABLE_SMC_DEBUG_RX		0
-#define ENABLE_SMC_DEBUG_TX		0
-#define ENABLE_SMC_DEBUG_DMA		0
-#define ENABLE_SMC_DEBUG_PKTS		0
-#define ENABLE_SMC_DEBUG_MISC		0
-#define ENABLE_SMC_DEBUG_FUNC		0
-
-#define SMC_DEBUG_RX		((ENABLE_SMC_DEBUG_RX	? 1 : 0) << 0)
-#define SMC_DEBUG_TX		((ENABLE_SMC_DEBUG_TX	? 1 : 0) << 1)
-#define SMC_DEBUG_DMA		((ENABLE_SMC_DEBUG_DMA	? 1 : 0) << 2)
-#define SMC_DEBUG_PKTS		((ENABLE_SMC_DEBUG_PKTS ? 1 : 0) << 3)
-#define SMC_DEBUG_MISC		((ENABLE_SMC_DEBUG_MISC ? 1 : 0) << 4)
-#define SMC_DEBUG_FUNC		((ENABLE_SMC_DEBUG_FUNC ? 1 : 0) << 5)
-
-#ifndef SMC_DEBUG
-#define SMC_DEBUG	 ( SMC_DEBUG_RX	  | \
-			   SMC_DEBUG_TX	  | \
-			   SMC_DEBUG_DMA  | \
-			   SMC_DEBUG_PKTS | \
-			   SMC_DEBUG_MISC | \
-			   SMC_DEBUG_FUNC   \
-			 )
-#endif
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/crc32.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/workqueue.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <linux/dmaengine.h>
-
-#include <asm/io.h>
-
-#include "smc911x.h"
-
-/*
- * Transmit timeout, default 5 seconds.
- */
-static int watchdog = 5000;
-module_param(watchdog, int, 0400);
-MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
-
-static int tx_fifo_kb=8;
-module_param(tx_fifo_kb, int, 0400);
-MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)");
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:smc911x");
-
-/*
- * The internal workings of the driver.  If you are changing anything
- * here with the SMC stuff, you should have the datasheet and know
- * what you are doing.
- */
-#define CARDNAME "smc911x"
-
-/*
- * Use power-down feature of the chip
- */
-#define POWER_DOWN		 1
-
-#if SMC_DEBUG > 0
-#define DBG(n, dev, args...)			 \
-	do {					 \
-		if (SMC_DEBUG & (n))		 \
-			netdev_dbg(dev, args);	 \
-	} while (0)
-
-#define PRINTK(dev, args...)   netdev_info(dev, args)
-#else
-#define DBG(n, dev, args...)			 \
-	while (0) {				 \
-		netdev_dbg(dev, args);		 \
-	}
-#define PRINTK(dev, args...)   netdev_dbg(dev, args)
-#endif
-
-#if SMC_DEBUG_PKTS > 0
-static void PRINT_PKT(u_char *buf, int length)
-{
-	int i;
-	int remainder;
-	int lines;
-
-	lines = length / 16;
-	remainder = length % 16;
-
-	for (i = 0; i < lines ; i ++) {
-		int cur;
-		printk(KERN_DEBUG);
-		for (cur = 0; cur < 8; cur++) {
-			u_char a, b;
-			a = *buf++;
-			b = *buf++;
-			pr_cont("%02x%02x ", a, b);
-		}
-		pr_cont("\n");
-	}
-	printk(KERN_DEBUG);
-	for (i = 0; i < remainder/2 ; i++) {
-		u_char a, b;
-		a = *buf++;
-		b = *buf++;
-		pr_cont("%02x%02x ", a, b);
-	}
-	pr_cont("\n");
-}
-#else
-static inline void PRINT_PKT(u_char *buf, int length) { }
-#endif
-
-
-/* this enables an interrupt in the interrupt mask register */
-#define SMC_ENABLE_INT(lp, x) do {			\
-	unsigned int  __mask;				\
-	__mask = SMC_GET_INT_EN((lp));			\
-	__mask |= (x);					\
-	SMC_SET_INT_EN((lp), __mask);			\
-} while (0)
-
-/* this disables an interrupt from the interrupt mask register */
-#define SMC_DISABLE_INT(lp, x) do {			\
-	unsigned int  __mask;				\
-	__mask = SMC_GET_INT_EN((lp));			\
-	__mask &= ~(x);					\
-	SMC_SET_INT_EN((lp), __mask);			\
-} while (0)
-
-/*
- * this does a soft reset on the device
- */
-static void smc911x_reset(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int reg, timeout=0, resets=1, irq_cfg;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	/*	 Take out of PM setting first */
-	if ((SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_) == 0) {
-		/* Write to the bytetest will take out of powerdown */
-		SMC_SET_BYTE_TEST(lp, 0);
-		timeout=10;
-		do {
-			udelay(10);
-			reg = SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_;
-		} while (--timeout && !reg);
-		if (timeout == 0) {
-			PRINTK(dev, "smc911x_reset timeout waiting for PM restore\n");
-			return;
-		}
-	}
-
-	/* Disable all interrupts */
-	spin_lock_irqsave(&lp->lock, flags);
-	SMC_SET_INT_EN(lp, 0);
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	while (resets--) {
-		SMC_SET_HW_CFG(lp, HW_CFG_SRST_);
-		timeout=10;
-		do {
-			udelay(10);
-			reg = SMC_GET_HW_CFG(lp);
-			/* If chip indicates reset timeout then try again */
-			if (reg & HW_CFG_SRST_TO_) {
-				PRINTK(dev, "chip reset timeout, retrying...\n");
-				resets++;
-				break;
-			}
-		} while (--timeout && (reg & HW_CFG_SRST_));
-	}
-	if (timeout == 0) {
-		PRINTK(dev, "smc911x_reset timeout waiting for reset\n");
-		return;
-	}
-
-	/* make sure EEPROM has finished loading before setting GPIO_CFG */
-	timeout=1000;
-	while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_))
-		udelay(10);
-
-	if (timeout == 0){
-		PRINTK(dev, "smc911x_reset timeout waiting for EEPROM busy\n");
-		return;
-	}
-
-	/* Initialize interrupts */
-	SMC_SET_INT_EN(lp, 0);
-	SMC_ACK_INT(lp, -1);
-
-	/* Reset the FIFO level and flow control settings */
-	SMC_SET_HW_CFG(lp, (lp->tx_fifo_kb & 0xF) << 16);
-//TODO: Figure out what appropriate pause time is
-	SMC_SET_FLOW(lp, FLOW_FCPT_ | FLOW_FCEN_);
-	SMC_SET_AFC_CFG(lp, lp->afc_cfg);
-
-
-	/* Set to LED outputs */
-	SMC_SET_GPIO_CFG(lp, 0x70070000);
-
-	/*
-	 * Deassert IRQ for 1*10us for edge type interrupts
-	 * and drive IRQ pin push-pull
-	 */
-	irq_cfg = (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_;
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-	if (lp->cfg.irq_polarity)
-		irq_cfg |= INT_CFG_IRQ_POL_;
-#endif
-	SMC_SET_IRQ_CFG(lp, irq_cfg);
-
-	/* clear anything saved */
-	if (lp->pending_tx_skb != NULL) {
-		dev_kfree_skb (lp->pending_tx_skb);
-		lp->pending_tx_skb = NULL;
-		dev->stats.tx_errors++;
-		dev->stats.tx_aborted_errors++;
-	}
-}
-
-/*
- * Enable Interrupts, Receive, and Transmit
- */
-static void smc911x_enable(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned mask, cfg, cr;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	spin_lock_irqsave(&lp->lock, flags);
-
-	SMC_SET_MAC_ADDR(lp, dev->dev_addr);
-
-	/* Enable TX */
-	cfg = SMC_GET_HW_CFG(lp);
-	cfg &= HW_CFG_TX_FIF_SZ_ | 0xFFF;
-	cfg |= HW_CFG_SF_;
-	SMC_SET_HW_CFG(lp, cfg);
-	SMC_SET_FIFO_TDA(lp, 0xFF);
-	/* Update TX stats on every 64 packets received or every 1 sec */
-	SMC_SET_FIFO_TSL(lp, 64);
-	SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
-
-	SMC_GET_MAC_CR(lp, cr);
-	cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_;
-	SMC_SET_MAC_CR(lp, cr);
-	SMC_SET_TX_CFG(lp, TX_CFG_TX_ON_);
-
-	/* Add 2 byte padding to start of packets */
-	SMC_SET_RX_CFG(lp, (2<<8) & RX_CFG_RXDOFF_);
-
-	/* Turn on receiver and enable RX */
-	if (cr & MAC_CR_RXEN_)
-		DBG(SMC_DEBUG_RX, dev, "Receiver already enabled\n");
-
-	SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_);
-
-	/* Interrupt on every received packet */
-	SMC_SET_FIFO_RSA(lp, 0x01);
-	SMC_SET_FIFO_RSL(lp, 0x00);
-
-	/* now, enable interrupts */
-	mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ |
-		INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ |
-		INT_EN_PHY_INT_EN_;
-	if (IS_REV_A(lp->revision))
-		mask|=INT_EN_RDFL_EN_;
-	else {
-		mask|=INT_EN_RDFO_EN_;
-	}
-	SMC_ENABLE_INT(lp, mask);
-
-	spin_unlock_irqrestore(&lp->lock, flags);
-}
-
-/*
- * this puts the device in an inactive state
- */
-static void smc911x_shutdown(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned cr;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC, dev, "%s: --> %s\n", CARDNAME, __func__);
-
-	/* Disable IRQ's */
-	SMC_SET_INT_EN(lp, 0);
-
-	/* Turn of Rx and TX */
-	spin_lock_irqsave(&lp->lock, flags);
-	SMC_GET_MAC_CR(lp, cr);
-	cr &= ~(MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_);
-	SMC_SET_MAC_CR(lp, cr);
-	SMC_SET_TX_CFG(lp, TX_CFG_STOP_TX_);
-	spin_unlock_irqrestore(&lp->lock, flags);
-}
-
-static inline void smc911x_drop_pkt(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int fifo_count, timeout, reg;
-
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "%s: --> %s\n",
-	    CARDNAME, __func__);
-	fifo_count = SMC_GET_RX_FIFO_INF(lp) & 0xFFFF;
-	if (fifo_count <= 4) {
-		/* Manually dump the packet data */
-		while (fifo_count--)
-			SMC_GET_RX_FIFO(lp);
-	} else	 {
-		/* Fast forward through the bad packet */
-		SMC_SET_RX_DP_CTRL(lp, RX_DP_CTRL_FFWD_BUSY_);
-		timeout=50;
-		do {
-			udelay(10);
-			reg = SMC_GET_RX_DP_CTRL(lp) & RX_DP_CTRL_FFWD_BUSY_;
-		} while (--timeout && reg);
-		if (timeout == 0) {
-			PRINTK(dev, "timeout waiting for RX fast forward\n");
-		}
-	}
-}
-
-/*
- * This is the procedure to handle the receipt of a packet.
- * It should be called after checking for packet presence in
- * the RX status FIFO.	 It must be called with the spin lock
- * already held.
- */
-static inline void	 smc911x_rcv(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int pkt_len, status;
-	struct sk_buff *skb;
-	unsigned char *data;
-
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "--> %s\n",
-	    __func__);
-	status = SMC_GET_RX_STS_FIFO(lp);
-	DBG(SMC_DEBUG_RX, dev, "Rx pkt len %d status 0x%08x\n",
-	    (status & 0x3fff0000) >> 16, status & 0xc000ffff);
-	pkt_len = (status & RX_STS_PKT_LEN_) >> 16;
-	if (status & RX_STS_ES_) {
-		/* Deal with a bad packet */
-		dev->stats.rx_errors++;
-		if (status & RX_STS_CRC_ERR_)
-			dev->stats.rx_crc_errors++;
-		else {
-			if (status & RX_STS_LEN_ERR_)
-				dev->stats.rx_length_errors++;
-			if (status & RX_STS_MCAST_)
-				dev->stats.multicast++;
-		}
-		/* Remove the bad packet data from the RX FIFO */
-		smc911x_drop_pkt(dev);
-	} else {
-		/* Receive a valid packet */
-		/* Alloc a buffer with extra room for DMA alignment */
-		skb = netdev_alloc_skb(dev, pkt_len+32);
-		if (unlikely(skb == NULL)) {
-			PRINTK(dev, "Low memory, rcvd packet dropped.\n");
-			dev->stats.rx_dropped++;
-			smc911x_drop_pkt(dev);
-			return;
-		}
-		/* Align IP header to 32 bits
-		 * Note that the device is configured to add a 2
-		 * byte padding to the packet start, so we really
-		 * want to write to the orignal data pointer */
-		data = skb->data;
-		skb_reserve(skb, 2);
-		skb_put(skb,pkt_len-4);
-#ifdef SMC_USE_DMA
-		{
-		unsigned int fifo;
-		/* Lower the FIFO threshold if possible */
-		fifo = SMC_GET_FIFO_INT(lp);
-		if (fifo & 0xFF) fifo--;
-		DBG(SMC_DEBUG_RX, dev, "Setting RX stat FIFO threshold to %d\n",
-		    fifo & 0xff);
-		SMC_SET_FIFO_INT(lp, fifo);
-		/* Setup RX DMA */
-		SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_));
-		lp->rxdma_active = 1;
-		lp->current_rx_skb = skb;
-		SMC_PULL_DATA(lp, data, (pkt_len+2+15) & ~15);
-		/* Packet processing deferred to DMA RX interrupt */
-		}
-#else
-		SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_));
-		SMC_PULL_DATA(lp, data, pkt_len+2+3);
-
-		DBG(SMC_DEBUG_PKTS, dev, "Received packet\n");
-		PRINT_PKT(data, min(pkt_len - 4, 64U));
-		skb->protocol = eth_type_trans(skb, dev);
-		netif_rx(skb);
-		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += pkt_len-4;
-#endif
-	}
-}
-
-/*
- * This is called to actually send a packet to the chip.
- */
-static void smc911x_hardware_send_pkt(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	struct sk_buff *skb;
-	unsigned int cmdA, cmdB, len;
-	unsigned char *buf;
-
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", __func__);
-	BUG_ON(lp->pending_tx_skb == NULL);
-
-	skb = lp->pending_tx_skb;
-	lp->pending_tx_skb = NULL;
-
-	/* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */
-	/* cmdB {31:16] pkt tag [10:0] length */
-#ifdef SMC_USE_DMA
-	/* 16 byte buffer alignment mode */
-	buf = (char*)((u32)(skb->data) & ~0xF);
-	len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF;
-	cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) |
-			TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
-			skb->len;
-#else
-	buf = (char *)((uintptr_t)skb->data & ~0x3);
-	len = (skb->len + 3 + ((uintptr_t)skb->data & 3)) & ~0x3;
-	cmdA = (((uintptr_t)skb->data & 0x3) << 16) |
-			TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
-			skb->len;
-#endif
-	/* tag is packet length so we can use this in stats update later */
-	cmdB = (skb->len  << 16) | (skb->len & 0x7FF);
-
-	DBG(SMC_DEBUG_TX, dev, "TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
-	    len, len, buf, cmdA, cmdB);
-	SMC_SET_TX_FIFO(lp, cmdA);
-	SMC_SET_TX_FIFO(lp, cmdB);
-
-	DBG(SMC_DEBUG_PKTS, dev, "Transmitted packet\n");
-	PRINT_PKT(buf, min(len, 64U));
-
-	/* Send pkt via PIO or DMA */
-#ifdef SMC_USE_DMA
-	lp->current_tx_skb = skb;
-	SMC_PUSH_DATA(lp, buf, len);
-	/* DMA complete IRQ will free buffer and set jiffies */
-#else
-	SMC_PUSH_DATA(lp, buf, len);
-	netif_trans_update(dev);
-	dev_kfree_skb_irq(skb);
-#endif
-	if (!lp->tx_throttle) {
-		netif_wake_queue(dev);
-	}
-	SMC_ENABLE_INT(lp, INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_);
-}
-
-/*
- * Since I am not sure if I will have enough room in the chip's ram
- * to store the packet, I call this routine which either sends it
- * now, or set the card to generates an interrupt when ready
- * for the packet.
- */
-static netdev_tx_t
-smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int free;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n",
-	    __func__);
-
-	spin_lock_irqsave(&lp->lock, flags);
-
-	BUG_ON(lp->pending_tx_skb != NULL);
-
-	free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_;
-	DBG(SMC_DEBUG_TX, dev, "TX free space %d\n", free);
-
-	/* Turn off the flow when running out of space in FIFO */
-	if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) {
-		DBG(SMC_DEBUG_TX, dev, "Disabling data flow due to low FIFO space (%d)\n",
-		    free);
-		/* Reenable when at least 1 packet of size MTU present */
-		SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64);
-		lp->tx_throttle = 1;
-		netif_stop_queue(dev);
-	}
-
-	/* Drop packets when we run out of space in TX FIFO
-	 * Account for overhead required for:
-	 *
-	 *	  Tx command words			 8 bytes
-	 *	  Start offset				 15 bytes
-	 *	  End padding				 15 bytes
-	 */
-	if (unlikely(free < (skb->len + 8 + 15 + 15))) {
-		netdev_warn(dev, "No Tx free space %d < %d\n",
-			    free, skb->len);
-		lp->pending_tx_skb = NULL;
-		dev->stats.tx_errors++;
-		dev->stats.tx_dropped++;
-		spin_unlock_irqrestore(&lp->lock, flags);
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
-
-#ifdef SMC_USE_DMA
-	{
-		/* If the DMA is already running then defer this packet Tx until
-		 * the DMA IRQ starts it
-		 */
-		if (lp->txdma_active) {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Tx DMA running, deferring packet\n");
-			lp->pending_tx_skb = skb;
-			netif_stop_queue(dev);
-			spin_unlock_irqrestore(&lp->lock, flags);
-			return NETDEV_TX_OK;
-		} else {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Activating Tx DMA\n");
-			lp->txdma_active = 1;
-		}
-	}
-#endif
-	lp->pending_tx_skb = skb;
-	smc911x_hardware_send_pkt(dev);
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	return NETDEV_TX_OK;
-}
-
-/*
- * This handles a TX status interrupt, which is only called when:
- * - a TX error occurred, or
- * - TX of a packet completed.
- */
-static void smc911x_tx(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int tx_status;
-
-	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n",
-	    __func__);
-
-	/* Collect the TX status */
-	while (((SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16) != 0) {
-		DBG(SMC_DEBUG_TX, dev, "Tx stat FIFO used 0x%04x\n",
-		    (SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16);
-		tx_status = SMC_GET_TX_STS_FIFO(lp);
-		dev->stats.tx_packets++;
-		dev->stats.tx_bytes+=tx_status>>16;
-		DBG(SMC_DEBUG_TX, dev, "Tx FIFO tag 0x%04x status 0x%04x\n",
-		    (tx_status & 0xffff0000) >> 16,
-		    tx_status & 0x0000ffff);
-		/* count Tx errors, but ignore lost carrier errors when in
-		 * full-duplex mode */
-		if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx &&
-		    !(tx_status & 0x00000306))) {
-			dev->stats.tx_errors++;
-		}
-		if (tx_status & TX_STS_MANY_COLL_) {
-			dev->stats.collisions+=16;
-			dev->stats.tx_aborted_errors++;
-		} else {
-			dev->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3;
-		}
-		/* carrier error only has meaning for half-duplex communication */
-		if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) &&
-		    !lp->ctl_rfduplx) {
-			dev->stats.tx_carrier_errors++;
-		}
-		if (tx_status & TX_STS_LATE_COLL_) {
-			dev->stats.collisions++;
-			dev->stats.tx_aborted_errors++;
-		}
-	}
-}
-
-
-/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
-/*
- * Reads a register from the MII Management serial interface
- */
-
-static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int phydata;
-
-	SMC_GET_MII(lp, phyreg, phyaddr, phydata);
-
-	DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n",
-	    __func__, phyaddr, phyreg, phydata);
-	return phydata;
-}
-
-
-/*
- * Writes a register to the MII Management serial interface
- */
-static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg,
-			int phydata)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-
-	DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-	    __func__, phyaddr, phyreg, phydata);
-
-	SMC_SET_MII(lp, phyreg, phyaddr, phydata);
-}
-
-/*
- * Finds and reports the PHY address (115 and 117 have external
- * PHY interface 118 has internal only
- */
-static void smc911x_phy_detect(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int phyaddr;
-	unsigned int cfg, id1, id2;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	lp->phy_type = 0;
-
-	/*
-	 * Scan all 32 PHY addresses if necessary, starting at
-	 * PHY#1 to PHY#31, and then PHY#0 last.
-	 */
-	switch(lp->version) {
-		case CHIP_9115:
-		case CHIP_9117:
-		case CHIP_9215:
-		case CHIP_9217:
-			cfg = SMC_GET_HW_CFG(lp);
-			if (cfg & HW_CFG_EXT_PHY_DET_) {
-				cfg &= ~HW_CFG_PHY_CLK_SEL_;
-				cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
-				SMC_SET_HW_CFG(lp, cfg);
-				udelay(10); /* Wait for clocks to stop */
-
-				cfg |= HW_CFG_EXT_PHY_EN_;
-				SMC_SET_HW_CFG(lp, cfg);
-				udelay(10); /* Wait for clocks to stop */
-
-				cfg &= ~HW_CFG_PHY_CLK_SEL_;
-				cfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
-				SMC_SET_HW_CFG(lp, cfg);
-				udelay(10); /* Wait for clocks to stop */
-
-				cfg |= HW_CFG_SMI_SEL_;
-				SMC_SET_HW_CFG(lp, cfg);
-
-				for (phyaddr = 1; phyaddr < 32; ++phyaddr) {
-
-					/* Read the PHY identifiers */
-					SMC_GET_PHY_ID1(lp, phyaddr & 31, id1);
-					SMC_GET_PHY_ID2(lp, phyaddr & 31, id2);
-
-					/* Make sure it is a valid identifier */
-					if (id1 != 0x0000 && id1 != 0xffff &&
-					    id1 != 0x8000 && id2 != 0x0000 &&
-					    id2 != 0xffff && id2 != 0x8000) {
-						/* Save the PHY's address */
-						lp->mii.phy_id = phyaddr & 31;
-						lp->phy_type = id1 << 16 | id2;
-						break;
-					}
-				}
-				if (phyaddr < 32)
-					/* Found an external PHY */
-					break;
-			}
-			fallthrough;
-		default:
-			/* Internal media only */
-			SMC_GET_PHY_ID1(lp, 1, id1);
-			SMC_GET_PHY_ID2(lp, 1, id2);
-			/* Save the PHY's address */
-			lp->mii.phy_id = 1;
-			lp->phy_type = id1 << 16 | id2;
-	}
-
-	DBG(SMC_DEBUG_MISC, dev, "phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%x\n",
-	    id1, id2, lp->mii.phy_id);
-}
-
-/*
- * Sets the PHY to a configuration as determined by the user.
- * Called with spin_lock held.
- */
-static int smc911x_phy_fixed(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int phyaddr = lp->mii.phy_id;
-	int bmcr;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	/* Enter Link Disable state */
-	SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
-	bmcr |= BMCR_PDOWN;
-	SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
-
-	/*
-	 * Set our fixed capabilities
-	 * Disable auto-negotiation
-	 */
-	bmcr &= ~BMCR_ANENABLE;
-	if (lp->ctl_rfduplx)
-		bmcr |= BMCR_FULLDPLX;
-
-	if (lp->ctl_rspeed == 100)
-		bmcr |= BMCR_SPEED100;
-
-	/* Write our capabilities to the phy control register */
-	SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
-
-	/* Re-Configure the Receive/Phy Control register */
-	bmcr &= ~BMCR_PDOWN;
-	SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
-
-	return 1;
-}
-
-/**
- * smc911x_phy_reset - reset the phy
- * @dev: net device
- * @phy: phy address
- *
- * Issue a software reset for the specified PHY and
- * wait up to 100ms for the reset to complete.	 We should
- * not access the PHY for 50ms after issuing the reset.
- *
- * The time to wait appears to be dependent on the PHY.
- *
- */
-static int smc911x_phy_reset(struct net_device *dev, int phy)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int timeout;
-	unsigned long flags;
-	unsigned int reg;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__);
-
-	spin_lock_irqsave(&lp->lock, flags);
-	reg = SMC_GET_PMT_CTRL(lp);
-	reg &= ~0xfffff030;
-	reg |= PMT_CTRL_PHY_RST_;
-	SMC_SET_PMT_CTRL(lp, reg);
-	spin_unlock_irqrestore(&lp->lock, flags);
-	for (timeout = 2; timeout; timeout--) {
-		msleep(50);
-		spin_lock_irqsave(&lp->lock, flags);
-		reg = SMC_GET_PMT_CTRL(lp);
-		spin_unlock_irqrestore(&lp->lock, flags);
-		if (!(reg & PMT_CTRL_PHY_RST_)) {
-			/* extra delay required because the phy may
-			 * not be completed with its reset
-			 * when PHY_BCR_RESET_ is cleared. 256us
-			 * should suffice, but use 500us to be safe
-			 */
-			udelay(500);
-		break;
-		}
-	}
-
-	return reg & PMT_CTRL_PHY_RST_;
-}
-
-/**
- * smc911x_phy_powerdown - powerdown phy
- * @dev: net device
- * @phy: phy address
- *
- * Power down the specified PHY
- */
-static void smc911x_phy_powerdown(struct net_device *dev, int phy)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int bmcr;
-
-	/* Enter Link Disable state */
-	SMC_GET_PHY_BMCR(lp, phy, bmcr);
-	bmcr |= BMCR_PDOWN;
-	SMC_SET_PHY_BMCR(lp, phy, bmcr);
-}
-
-/**
- * smc911x_phy_check_media - check the media status and adjust BMCR
- * @dev: net device
- * @init: set true for initialisation
- *
- * Select duplex mode depending on negotiation state.	This
- * also updates our carrier state.
- */
-static void smc911x_phy_check_media(struct net_device *dev, int init)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int phyaddr = lp->mii.phy_id;
-	unsigned int bmcr, cr;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
-		/* duplex state has changed */
-		SMC_GET_PHY_BMCR(lp, phyaddr, bmcr);
-		SMC_GET_MAC_CR(lp, cr);
-		if (lp->mii.full_duplex) {
-			DBG(SMC_DEBUG_MISC, dev, "Configuring for full-duplex mode\n");
-			bmcr |= BMCR_FULLDPLX;
-			cr |= MAC_CR_RCVOWN_;
-		} else {
-			DBG(SMC_DEBUG_MISC, dev, "Configuring for half-duplex mode\n");
-			bmcr &= ~BMCR_FULLDPLX;
-			cr &= ~MAC_CR_RCVOWN_;
-		}
-		SMC_SET_PHY_BMCR(lp, phyaddr, bmcr);
-		SMC_SET_MAC_CR(lp, cr);
-	}
-}
-
-/*
- * Configures the specified PHY through the MII management interface
- * using Autonegotiation.
- * Calls smc911x_phy_fixed() if the user has requested a certain config.
- * If RPC ANEG bit is set, the media selection is dependent purely on
- * the selection by the MII (either in the MII BMCR reg or the result
- * of autonegotiation.)  If the RPC ANEG bit is cleared, the selection
- * is controlled by the RPC SPEED and RPC DPLX bits.
- */
-static void smc911x_phy_configure(struct work_struct *work)
-{
-	struct smc911x_local *lp = container_of(work, struct smc911x_local,
-						phy_configure);
-	struct net_device *dev = lp->netdev;
-	int phyaddr = lp->mii.phy_id;
-	int my_phy_caps; /* My PHY capabilities */
-	int my_ad_caps; /* My Advertised capabilities */
-	int status __always_unused;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__);
-
-	/*
-	 * We should not be called if phy_type is zero.
-	 */
-	if (lp->phy_type == 0)
-		return;
-
-	if (smc911x_phy_reset(dev, phyaddr)) {
-		netdev_info(dev, "PHY reset timed out\n");
-		return;
-	}
-	spin_lock_irqsave(&lp->lock, flags);
-
-	/*
-	 * Enable PHY Interrupts (for register 18)
-	 * Interrupts listed here are enabled
-	 */
-	SMC_SET_PHY_INT_MASK(lp, phyaddr, PHY_INT_MASK_ENERGY_ON_ |
-		 PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_REMOTE_FAULT_ |
-		 PHY_INT_MASK_LINK_DOWN_);
-
-	/* If the user requested no auto neg, then go set his request */
-	if (lp->mii.force_media) {
-		smc911x_phy_fixed(dev);
-		goto smc911x_phy_configure_exit;
-	}
-
-	/* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
-	SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps);
-	if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
-		netdev_info(dev, "Auto negotiation NOT supported\n");
-		smc911x_phy_fixed(dev);
-		goto smc911x_phy_configure_exit;
-	}
-
-	/* CSMA capable w/ both pauses */
-	my_ad_caps = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-
-	if (my_phy_caps & BMSR_100BASE4)
-		my_ad_caps |= ADVERTISE_100BASE4;
-	if (my_phy_caps & BMSR_100FULL)
-		my_ad_caps |= ADVERTISE_100FULL;
-	if (my_phy_caps & BMSR_100HALF)
-		my_ad_caps |= ADVERTISE_100HALF;
-	if (my_phy_caps & BMSR_10FULL)
-		my_ad_caps |= ADVERTISE_10FULL;
-	if (my_phy_caps & BMSR_10HALF)
-		my_ad_caps |= ADVERTISE_10HALF;
-
-	/* Disable capabilities not selected by our user */
-	if (lp->ctl_rspeed != 100)
-		my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF);
-
-	if (!lp->ctl_rfduplx)
-		my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL);
-
-	/* Update our Auto-Neg Advertisement Register */
-	SMC_SET_PHY_MII_ADV(lp, phyaddr, my_ad_caps);
-	lp->mii.advertising = my_ad_caps;
-
-	/*
-	 * Read the register back.	 Without this, it appears that when
-	 * auto-negotiation is restarted, sometimes it isn't ready and
-	 * the link does not come up.
-	 */
-	udelay(10);
-	SMC_GET_PHY_MII_ADV(lp, phyaddr, status);
-
-	DBG(SMC_DEBUG_MISC, dev, "phy caps=0x%04x\n", my_phy_caps);
-	DBG(SMC_DEBUG_MISC, dev, "phy advertised caps=0x%04x\n", my_ad_caps);
-
-	/* Restart auto-negotiation process in order to advertise my caps */
-	SMC_SET_PHY_BMCR(lp, phyaddr, BMCR_ANENABLE | BMCR_ANRESTART);
-
-	smc911x_phy_check_media(dev, 1);
-
-smc911x_phy_configure_exit:
-	spin_unlock_irqrestore(&lp->lock, flags);
-}
-
-/*
- * smc911x_phy_interrupt
- *
- * Purpose:  Handle interrupts relating to PHY register 18. This is
- *	 called from the "hard" interrupt handler under our private spinlock.
- */
-static void smc911x_phy_interrupt(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int phyaddr = lp->mii.phy_id;
-	int status __always_unused;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	if (lp->phy_type == 0)
-		return;
-
-	smc911x_phy_check_media(dev, 0);
-	/* read to clear status bits */
-	SMC_GET_PHY_INT_SRC(lp, phyaddr,status);
-	DBG(SMC_DEBUG_MISC, dev, "PHY interrupt status 0x%04x\n",
-	    status & 0xffff);
-	DBG(SMC_DEBUG_MISC, dev, "AFC_CFG 0x%08x\n",
-	    SMC_GET_AFC_CFG(lp));
-}
-
-/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
-
-/*
- * This is the main routine of the driver, to handle the device when
- * it needs some attention.
- */
-static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int status, mask, timeout;
-	unsigned int rx_overrun=0, cr, pkts;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	spin_lock_irqsave(&lp->lock, flags);
-
-	/* Spurious interrupt check */
-	if ((SMC_GET_IRQ_CFG(lp) & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) !=
-		(INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) {
-		spin_unlock_irqrestore(&lp->lock, flags);
-		return IRQ_NONE;
-	}
-
-	mask = SMC_GET_INT_EN(lp);
-	SMC_SET_INT_EN(lp, 0);
-
-	/* set a timeout value, so I don't stay here forever */
-	timeout = 8;
-
-
-	do {
-		status = SMC_GET_INT(lp);
-
-		DBG(SMC_DEBUG_MISC, dev, "INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n",
-		    status, mask, status & ~mask);
-
-		status &= mask;
-		if (!status)
-			break;
-
-		/* Handle SW interrupt condition */
-		if (status & INT_STS_SW_INT_) {
-			SMC_ACK_INT(lp, INT_STS_SW_INT_);
-			mask &= ~INT_EN_SW_INT_EN_;
-		}
-		/* Handle various error conditions */
-		if (status & INT_STS_RXE_) {
-			SMC_ACK_INT(lp, INT_STS_RXE_);
-			dev->stats.rx_errors++;
-		}
-		if (status & INT_STS_RXDFH_INT_) {
-			SMC_ACK_INT(lp, INT_STS_RXDFH_INT_);
-			dev->stats.rx_dropped+=SMC_GET_RX_DROP(lp);
-		 }
-		/* Undocumented interrupt-what is the right thing to do here? */
-		if (status & INT_STS_RXDF_INT_) {
-			SMC_ACK_INT(lp, INT_STS_RXDF_INT_);
-		}
-
-		/* Rx Data FIFO exceeds set level */
-		if (status & INT_STS_RDFL_) {
-			if (IS_REV_A(lp->revision)) {
-				rx_overrun=1;
-				SMC_GET_MAC_CR(lp, cr);
-				cr &= ~MAC_CR_RXEN_;
-				SMC_SET_MAC_CR(lp, cr);
-				DBG(SMC_DEBUG_RX, dev, "RX overrun\n");
-				dev->stats.rx_errors++;
-				dev->stats.rx_fifo_errors++;
-			}
-			SMC_ACK_INT(lp, INT_STS_RDFL_);
-		}
-		if (status & INT_STS_RDFO_) {
-			if (!IS_REV_A(lp->revision)) {
-				SMC_GET_MAC_CR(lp, cr);
-				cr &= ~MAC_CR_RXEN_;
-				SMC_SET_MAC_CR(lp, cr);
-				rx_overrun=1;
-				DBG(SMC_DEBUG_RX, dev, "RX overrun\n");
-				dev->stats.rx_errors++;
-				dev->stats.rx_fifo_errors++;
-			}
-			SMC_ACK_INT(lp, INT_STS_RDFO_);
-		}
-		/* Handle receive condition */
-		if ((status & INT_STS_RSFL_) || rx_overrun) {
-			unsigned int fifo;
-			DBG(SMC_DEBUG_RX, dev, "RX irq\n");
-			fifo = SMC_GET_RX_FIFO_INF(lp);
-			pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16;
-			DBG(SMC_DEBUG_RX, dev, "Rx FIFO pkts %d, bytes %d\n",
-			    pkts, fifo & 0xFFFF);
-			if (pkts != 0) {
-#ifdef SMC_USE_DMA
-				unsigned int fifo;
-				if (lp->rxdma_active){
-					DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev,
-					    "RX DMA active\n");
-					/* The DMA is already running so up the IRQ threshold */
-					fifo = SMC_GET_FIFO_INT(lp) & ~0xFF;
-					fifo |= pkts & 0xFF;
-					DBG(SMC_DEBUG_RX, dev,
-					    "Setting RX stat FIFO threshold to %d\n",
-					    fifo & 0xff);
-					SMC_SET_FIFO_INT(lp, fifo);
-				} else
-#endif
-				smc911x_rcv(dev);
-			}
-			SMC_ACK_INT(lp, INT_STS_RSFL_);
-		}
-		/* Handle transmit FIFO available */
-		if (status & INT_STS_TDFA_) {
-			DBG(SMC_DEBUG_TX, dev, "TX data FIFO space available irq\n");
-			SMC_SET_FIFO_TDA(lp, 0xFF);
-			lp->tx_throttle = 0;
-#ifdef SMC_USE_DMA
-			if (!lp->txdma_active)
-#endif
-				netif_wake_queue(dev);
-			SMC_ACK_INT(lp, INT_STS_TDFA_);
-		}
-		/* Handle transmit done condition */
-#if 1
-		if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) {
-			DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, dev,
-			    "Tx stat FIFO limit (%d) /GPT irq\n",
-			    (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16);
-			smc911x_tx(dev);
-			SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
-			SMC_ACK_INT(lp, INT_STS_TSFL_);
-			SMC_ACK_INT(lp, INT_STS_TSFL_ | INT_STS_GPT_INT_);
-		}
-#else
-		if (status & INT_STS_TSFL_) {
-			DBG(SMC_DEBUG_TX, dev, "TX status FIFO limit (%d) irq\n", ?);
-			smc911x_tx(dev);
-			SMC_ACK_INT(lp, INT_STS_TSFL_);
-		}
-
-		if (status & INT_STS_GPT_INT_) {
-			DBG(SMC_DEBUG_RX, dev, "IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
-			    SMC_GET_IRQ_CFG(lp),
-			    SMC_GET_FIFO_INT(lp),
-			    SMC_GET_RX_CFG(lp));
-			DBG(SMC_DEBUG_RX, dev, "Rx Stat FIFO Used 0x%02x Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
-			    (SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16,
-			    SMC_GET_RX_FIFO_INF(lp) & 0xffff,
-			    SMC_GET_RX_STS_FIFO_PEEK(lp));
-			SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
-			SMC_ACK_INT(lp, INT_STS_GPT_INT_);
-		}
-#endif
-
-		/* Handle PHY interrupt condition */
-		if (status & INT_STS_PHY_INT_) {
-			DBG(SMC_DEBUG_MISC, dev, "PHY irq\n");
-			smc911x_phy_interrupt(dev);
-			SMC_ACK_INT(lp, INT_STS_PHY_INT_);
-		}
-	} while (--timeout);
-
-	/* restore mask state */
-	SMC_SET_INT_EN(lp, mask);
-
-	DBG(SMC_DEBUG_MISC, dev, "Interrupt done (%d loops)\n",
-	    8-timeout);
-
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-#ifdef SMC_USE_DMA
-static void
-smc911x_tx_dma_irq(void *data)
-{
-	struct smc911x_local *lp = data;
-	struct net_device *dev = lp->netdev;
-	struct sk_buff *skb = lp->current_tx_skb;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "TX DMA irq handler\n");
-	BUG_ON(skb == NULL);
-	dma_unmap_single(lp->dev, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE);
-	netif_trans_update(dev);
-	dev_kfree_skb_irq(skb);
-	lp->current_tx_skb = NULL;
-	if (lp->pending_tx_skb != NULL)
-		smc911x_hardware_send_pkt(dev);
-	else {
-		DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev,
-		    "No pending Tx packets. DMA disabled\n");
-		spin_lock_irqsave(&lp->lock, flags);
-		lp->txdma_active = 0;
-		if (!lp->tx_throttle) {
-			netif_wake_queue(dev);
-		}
-		spin_unlock_irqrestore(&lp->lock, flags);
-	}
-
-	DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev,
-	    "TX DMA irq completed\n");
-}
-static void
-smc911x_rx_dma_irq(void *data)
-{
-	struct smc911x_local *lp = data;
-	struct net_device *dev = lp->netdev;
-	struct sk_buff *skb = lp->current_rx_skb;
-	unsigned long flags;
-	unsigned int pkts;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, "RX DMA irq handler\n");
-	dma_unmap_single(lp->dev, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE);
-	BUG_ON(skb == NULL);
-	lp->current_rx_skb = NULL;
-	PRINT_PKT(skb->data, skb->len);
-	skb->protocol = eth_type_trans(skb, dev);
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += skb->len;
-	netif_rx(skb);
-
-	spin_lock_irqsave(&lp->lock, flags);
-	pkts = (SMC_GET_RX_FIFO_INF(lp) & RX_FIFO_INF_RXSUSED_) >> 16;
-	if (pkts != 0) {
-		smc911x_rcv(dev);
-	}else {
-		lp->rxdma_active = 0;
-	}
-	spin_unlock_irqrestore(&lp->lock, flags);
-	DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev,
-	    "RX DMA irq completed. DMA RX FIFO PKTS %d\n",
-	    pkts);
-}
-#endif	 /* SMC_USE_DMA */
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling receive - used by netconsole and other diagnostic tools
- * to allow network i/o with interrupts disabled.
- */
-static void smc911x_poll_controller(struct net_device *dev)
-{
-	disable_irq(dev->irq);
-	smc911x_interrupt(dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-/* Our watchdog timed out. Called by the networking layer */
-static void smc911x_timeout(struct net_device *dev, unsigned int txqueue)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int status, mask;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	spin_lock_irqsave(&lp->lock, flags);
-	status = SMC_GET_INT(lp);
-	mask = SMC_GET_INT_EN(lp);
-	spin_unlock_irqrestore(&lp->lock, flags);
-	DBG(SMC_DEBUG_MISC, dev, "INT 0x%02x MASK 0x%02x\n",
-	    status, mask);
-
-	/* Dump the current TX FIFO contents and restart */
-	mask = SMC_GET_TX_CFG(lp);
-	SMC_SET_TX_CFG(lp, mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_);
-	/*
-	 * Reconfiguring the PHY doesn't seem like a bad idea here, but
-	 * smc911x_phy_configure() calls msleep() which calls schedule_timeout()
-	 * which calls schedule().	 Hence we use a work queue.
-	 */
-	if (lp->phy_type != 0)
-		schedule_work(&lp->phy_configure);
-
-	/* We can accept TX packets again */
-	netif_trans_update(dev); /* prevent tx timeout */
-	netif_wake_queue(dev);
-}
-
-/*
- * This routine will, depending on the values passed to it,
- * either make it accept multicast packets, go into
- * promiscuous mode (for TCPDUMP and cousins) or accept
- * a select set of multicast packets
- */
-static void smc911x_set_multicast_list(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int multicast_table[2];
-	unsigned int mcr, update_multicast = 0;
-	unsigned long flags;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	spin_lock_irqsave(&lp->lock, flags);
-	SMC_GET_MAC_CR(lp, mcr);
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	if (dev->flags & IFF_PROMISC) {
-
-		DBG(SMC_DEBUG_MISC, dev, "RCR_PRMS\n");
-		mcr |= MAC_CR_PRMS_;
-	}
-	/*
-	 * Here, I am setting this to accept all multicast packets.
-	 * I don't need to zero the multicast table, because the flag is
-	 * checked before the table is
-	 */
-	else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
-		DBG(SMC_DEBUG_MISC, dev, "RCR_ALMUL\n");
-		mcr |= MAC_CR_MCPAS_;
-	}
-
-	/*
-	 * This sets the internal hardware table to filter out unwanted
-	 * multicast packets before they take up memory.
-	 *
-	 * The SMC chip uses a hash table where the high 6 bits of the CRC of
-	 * address are the offset into the table.	If that bit is 1, then the
-	 * multicast packet is accepted.  Otherwise, it's dropped silently.
-	 *
-	 * To use the 6 bits as an offset into the table, the high 1 bit is
-	 * the number of the 32 bit register, while the low 5 bits are the bit
-	 * within that register.
-	 */
-	else if (!netdev_mc_empty(dev)) {
-		struct netdev_hw_addr *ha;
-
-		/* Set the Hash perfec mode */
-		mcr |= MAC_CR_HPFILT_;
-
-		/* start with a table of all zeros: reject all */
-		memset(multicast_table, 0, sizeof(multicast_table));
-
-		netdev_for_each_mc_addr(ha, dev) {
-			u32 position;
-
-			/* upper 6 bits are used as hash index */
-			position = ether_crc(ETH_ALEN, ha->addr)>>26;
-
-			multicast_table[position>>5] |= 1 << (position&0x1f);
-		}
-
-		/* be sure I get rid of flags I might have set */
-		mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
-
-		/* now, the table can be loaded into the chipset */
-		update_multicast = 1;
-	} else	 {
-		DBG(SMC_DEBUG_MISC, dev, "~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n");
-		mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
-
-		/*
-		 * since I'm disabling all multicast entirely, I need to
-		 * clear the multicast list
-		 */
-		memset(multicast_table, 0, sizeof(multicast_table));
-		update_multicast = 1;
-	}
-
-	spin_lock_irqsave(&lp->lock, flags);
-	SMC_SET_MAC_CR(lp, mcr);
-	if (update_multicast) {
-		DBG(SMC_DEBUG_MISC, dev,
-		    "update mcast hash table 0x%08x 0x%08x\n",
-		    multicast_table[0], multicast_table[1]);
-		SMC_SET_HASHL(lp, multicast_table[0]);
-		SMC_SET_HASHH(lp, multicast_table[1]);
-	}
-	spin_unlock_irqrestore(&lp->lock, flags);
-}
-
-
-/*
- * Open and Initialize the board
- *
- * Set up everything, reset the card, etc..
- */
-static int
-smc911x_open(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	/* reset the hardware */
-	smc911x_reset(dev);
-
-	/* Configure the PHY, initialize the link state */
-	smc911x_phy_configure(&lp->phy_configure);
-
-	/* Turn on Tx + Rx */
-	smc911x_enable(dev);
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-/*
- * smc911x_close
- *
- * this makes the board clean up everything that it can
- * and not talk to the outside world.	 Caused by
- * an 'ifconfig ethX down'
- */
-static int smc911x_close(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	netif_stop_queue(dev);
-	netif_carrier_off(dev);
-
-	/* clear everything */
-	smc911x_shutdown(dev);
-
-	if (lp->phy_type != 0) {
-		/* We need to ensure that no calls to
-		 * smc911x_phy_configure are pending.
-		 */
-		cancel_work_sync(&lp->phy_configure);
-		smc911x_phy_powerdown(dev, lp->mii.phy_id);
-	}
-
-	if (lp->pending_tx_skb) {
-		dev_kfree_skb(lp->pending_tx_skb);
-		lp->pending_tx_skb = NULL;
-	}
-
-	return 0;
-}
-
-/*
- * Ethtool support
- */
-static int
-smc911x_ethtool_get_link_ksettings(struct net_device *dev,
-				   struct ethtool_link_ksettings *cmd)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int status;
-	unsigned long flags;
-	u32 supported;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	if (lp->phy_type != 0) {
-		spin_lock_irqsave(&lp->lock, flags);
-		mii_ethtool_get_link_ksettings(&lp->mii, cmd);
-		spin_unlock_irqrestore(&lp->lock, flags);
-	} else {
-		supported = SUPPORTED_10baseT_Half |
-				SUPPORTED_10baseT_Full |
-				SUPPORTED_TP | SUPPORTED_AUI;
-
-		if (lp->ctl_rspeed == 10)
-			cmd->base.speed = SPEED_10;
-		else if (lp->ctl_rspeed == 100)
-			cmd->base.speed = SPEED_100;
-
-		cmd->base.autoneg = AUTONEG_DISABLE;
-		cmd->base.port = 0;
-		SMC_GET_PHY_SPECIAL(lp, lp->mii.phy_id, status);
-		cmd->base.duplex =
-			(status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ?
-				DUPLEX_FULL : DUPLEX_HALF;
-
-		ethtool_convert_legacy_u32_to_link_mode(
-			cmd->link_modes.supported, supported);
-
-	}
-
-	return 0;
-}
-
-static int
-smc911x_ethtool_set_link_ksettings(struct net_device *dev,
-				   const struct ethtool_link_ksettings *cmd)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int ret;
-	unsigned long flags;
-
-	if (lp->phy_type != 0) {
-		spin_lock_irqsave(&lp->lock, flags);
-		ret = mii_ethtool_set_link_ksettings(&lp->mii, cmd);
-		spin_unlock_irqrestore(&lp->lock, flags);
-	} else {
-		if (cmd->base.autoneg != AUTONEG_DISABLE ||
-		    cmd->base.speed != SPEED_10 ||
-		    (cmd->base.duplex != DUPLEX_HALF &&
-		     cmd->base.duplex != DUPLEX_FULL) ||
-		    (cmd->base.port != PORT_TP &&
-		     cmd->base.port != PORT_AUI))
-			return -EINVAL;
-
-		lp->ctl_rfduplx = cmd->base.duplex == DUPLEX_FULL;
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-static void
-smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	strscpy(info->driver, CARDNAME, sizeof(info->driver));
-	strscpy(info->version, version, sizeof(info->version));
-	strscpy(info->bus_info, dev_name(dev->dev.parent),
-		sizeof(info->bus_info));
-}
-
-static int smc911x_ethtool_nwayreset(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int ret = -EINVAL;
-	unsigned long flags;
-
-	if (lp->phy_type != 0) {
-		spin_lock_irqsave(&lp->lock, flags);
-		ret = mii_nway_restart(&lp->mii);
-		spin_unlock_irqrestore(&lp->lock, flags);
-	}
-
-	return ret;
-}
-
-static u32 smc911x_ethtool_getmsglevel(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	return lp->msg_enable;
-}
-
-static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	lp->msg_enable = level;
-}
-
-static int smc911x_ethtool_getregslen(struct net_device *dev)
-{
-	/* System regs + MAC regs + PHY regs */
-	return (((E2P_CMD - ID_REV)/4 + 1) +
-			(WUCSR - MAC_CR)+1 + 32) * sizeof(u32);
-}
-
-static void smc911x_ethtool_getregs(struct net_device *dev,
-				    struct ethtool_regs *regs, void *buf)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	u32 reg,i,j=0;
-	u32 *data = (u32*)buf;
-
-	regs->version = lp->version;
-	for(i=ID_REV;i<=E2P_CMD;i+=4) {
-		data[j++] = SMC_inl(lp, i);
-	}
-	for(i=MAC_CR;i<=WUCSR;i++) {
-		spin_lock_irqsave(&lp->lock, flags);
-		SMC_GET_MAC_CSR(lp, i, reg);
-		spin_unlock_irqrestore(&lp->lock, flags);
-		data[j++] = reg;
-	}
-	for(i=0;i<=31;i++) {
-		spin_lock_irqsave(&lp->lock, flags);
-		SMC_GET_MII(lp, i, lp->mii.phy_id, reg);
-		spin_unlock_irqrestore(&lp->lock, flags);
-		data[j++] = reg & 0xFFFF;
-	}
-}
-
-static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int timeout;
-	int e2p_cmd;
-
-	e2p_cmd = SMC_GET_E2P_CMD(lp);
-	for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) {
-		if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) {
-			PRINTK(dev, "%s timeout waiting for EEPROM to respond\n",
-			       __func__);
-			return -EFAULT;
-		}
-		mdelay(1);
-		e2p_cmd = SMC_GET_E2P_CMD(lp);
-	}
-	if (timeout == 0) {
-		PRINTK(dev, "%s timeout waiting for EEPROM CMD not busy\n",
-		       __func__);
-		return -ETIMEDOUT;
-	}
-	return 0;
-}
-
-static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev,
-						   int cmd, int addr)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int ret;
-
-	if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
-		return ret;
-	SMC_SET_E2P_CMD(lp, E2P_CMD_EPC_BUSY_ |
-		((cmd) & (0x7<<28)) |
-		((addr) & 0xFF));
-	return 0;
-}
-
-static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev,
-						   u8 *data)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int ret;
-
-	if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
-		return ret;
-	*data = SMC_GET_E2P_DATA(lp);
-	return 0;
-}
-
-static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev,
-						    u8 data)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int ret;
-
-	if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
-		return ret;
-	SMC_SET_E2P_DATA(lp, data);
-	return 0;
-}
-
-static int smc911x_ethtool_geteeprom(struct net_device *dev,
-				     struct ethtool_eeprom *eeprom, u8 *data)
-{
-	u8 eebuf[SMC911X_EEPROM_LEN];
-	int i, ret;
-
-	for(i=0;i<SMC911X_EEPROM_LEN;i++) {
-		if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ_, i ))!=0)
-			return ret;
-		if ((ret=smc911x_ethtool_read_eeprom_byte(dev, &eebuf[i]))!=0)
-			return ret;
-	}
-	memcpy(data, eebuf+eeprom->offset, eeprom->len);
-	return 0;
-}
-
-static int smc911x_ethtool_seteeprom(struct net_device *dev,
-				     struct ethtool_eeprom *eeprom, u8 *data)
-{
-	int i, ret;
-
-	/* Enable erase */
-	if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN_, 0 ))!=0)
-		return ret;
-	for(i=eeprom->offset;i<(eeprom->offset+eeprom->len);i++) {
-		/* erase byte */
-		if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE_, i ))!=0)
-			return ret;
-		/* write byte */
-		if ((ret=smc911x_ethtool_write_eeprom_byte(dev, *data))!=0)
-			return ret;
-		if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE_, i ))!=0)
-			return ret;
-	}
-	return 0;
-}
-
-static int smc911x_ethtool_geteeprom_len(struct net_device *dev)
-{
-	 return SMC911X_EEPROM_LEN;
-}
-
-static const struct ethtool_ops smc911x_ethtool_ops = {
-	.get_drvinfo	 = smc911x_ethtool_getdrvinfo,
-	.get_msglevel	 = smc911x_ethtool_getmsglevel,
-	.set_msglevel	 = smc911x_ethtool_setmsglevel,
-	.nway_reset = smc911x_ethtool_nwayreset,
-	.get_link	 = ethtool_op_get_link,
-	.get_regs_len	 = smc911x_ethtool_getregslen,
-	.get_regs	 = smc911x_ethtool_getregs,
-	.get_eeprom_len = smc911x_ethtool_geteeprom_len,
-	.get_eeprom = smc911x_ethtool_geteeprom,
-	.set_eeprom = smc911x_ethtool_seteeprom,
-	.get_link_ksettings	 = smc911x_ethtool_get_link_ksettings,
-	.set_link_ksettings	 = smc911x_ethtool_set_link_ksettings,
-};
-
-/*
- * smc911x_findirq
- *
- * This routine has a simple purpose -- make the SMC chip generate an
- * interrupt, so an auto-detect routine can detect it, and find the IRQ,
- */
-static int smc911x_findirq(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int timeout = 20;
-	unsigned long cookie;
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	cookie = probe_irq_on();
-
-	/*
-	 * Force a SW interrupt
-	 */
-
-	SMC_SET_INT_EN(lp, INT_EN_SW_INT_EN_);
-
-	/*
-	 * Wait until positive that the interrupt has been generated
-	 */
-	do {
-		int int_status;
-		udelay(10);
-		int_status = SMC_GET_INT_EN(lp);
-		if (int_status & INT_EN_SW_INT_EN_)
-			 break;		/* got the interrupt */
-	} while (--timeout);
-
-	/*
-	 * there is really nothing that I can do here if timeout fails,
-	 * as autoirq_report will return a 0 anyway, which is what I
-	 * want in this case.	 Plus, the clean up is needed in both
-	 * cases.
-	 */
-
-	/* and disable all interrupts again */
-	SMC_SET_INT_EN(lp, 0);
-
-	/* and return what I found */
-	return probe_irq_off(cookie);
-}
-
-static const struct net_device_ops smc911x_netdev_ops = {
-	.ndo_open		= smc911x_open,
-	.ndo_stop		= smc911x_close,
-	.ndo_start_xmit		= smc911x_hard_start_xmit,
-	.ndo_tx_timeout		= smc911x_timeout,
-	.ndo_set_rx_mode	= smc911x_set_multicast_list,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= smc911x_poll_controller,
-#endif
-};
-
-/*
- * Function: smc911x_probe(unsigned long ioaddr)
- *
- * Purpose:
- *	 Tests to see if a given ioaddr points to an SMC911x chip.
- *	 Returns a 0 on success
- *
- * Algorithm:
- *	 (1) see if the endian word is OK
- *	 (1) see if I recognize the chip ID in the appropriate register
- *
- * Here I do typical initialization tasks.
- *
- * o  Initialize the structure if needed
- * o  print out my vanity message if not done so already
- * o  print out what type of hardware is detected
- * o  print out the ethernet address
- * o  find the IRQ
- * o  set up my private data
- * o  configure the dev structure with my subroutines
- * o  actually GRAB the irq.
- * o  GRAB the region
- */
-static int smc911x_probe(struct net_device *dev)
-{
-	struct smc911x_local *lp = netdev_priv(dev);
-	int i, retval;
-	unsigned int val, chip_id, revision;
-	const char *version_string;
-	unsigned long irq_flags;
-#ifdef SMC_USE_DMA
-	struct dma_slave_config	config;
-	dma_cap_mask_t mask;
-#endif
-	u8 addr[ETH_ALEN];
-
-	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
-
-	/* First, see if the endian word is recognized */
-	val = SMC_GET_BYTE_TEST(lp);
-	DBG(SMC_DEBUG_MISC, dev, "%s: endian probe returned 0x%04x\n",
-	    CARDNAME, val);
-	if (val != 0x87654321) {
-		netdev_err(dev, "Invalid chip endian 0x%08x\n", val);
-		retval = -ENODEV;
-		goto err_out;
-	}
-
-	/*
-	 * check if the revision register is something that I
-	 * recognize.	These might need to be added to later,
-	 * as future revisions could be added.
-	 */
-	chip_id = SMC_GET_PN(lp);
-	DBG(SMC_DEBUG_MISC, dev, "%s: id probe returned 0x%04x\n",
-	    CARDNAME, chip_id);
-	for(i=0;chip_ids[i].id != 0; i++) {
-		if (chip_ids[i].id == chip_id) break;
-	}
-	if (!chip_ids[i].id) {
-		netdev_err(dev, "Unknown chip ID %04x\n", chip_id);
-		retval = -ENODEV;
-		goto err_out;
-	}
-	version_string = chip_ids[i].name;
-
-	revision = SMC_GET_REV(lp);
-	DBG(SMC_DEBUG_MISC, dev, "%s: revision = 0x%04x\n", CARDNAME, revision);
-
-	/* At this point I'll assume that the chip is an SMC911x. */
-	DBG(SMC_DEBUG_MISC, dev, "%s: Found a %s\n",
-	    CARDNAME, chip_ids[i].name);
-
-	/* Validate the TX FIFO size requested */
-	if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) {
-		netdev_err(dev, "Invalid TX FIFO size requested %d\n",
-			   tx_fifo_kb);
-		retval = -EINVAL;
-		goto err_out;
-	}
-
-	/* fill in some of the fields */
-	lp->version = chip_ids[i].id;
-	lp->revision = revision;
-	lp->tx_fifo_kb = tx_fifo_kb;
-	/* Reverse calculate the RX FIFO size from the TX */
-	lp->tx_fifo_size=(lp->tx_fifo_kb<<10) - 512;
-	lp->rx_fifo_size= ((0x4000 - 512 - lp->tx_fifo_size) / 16) * 15;
-
-	/* Set the automatic flow control values */
-	switch(lp->tx_fifo_kb) {
-		/*
-		 *	 AFC_HI is about ((Rx Data Fifo Size)*2/3)/64
-		 *	 AFC_LO is AFC_HI/2
-		 *	 BACK_DUR is about 5uS*(AFC_LO) rounded down
-		 */
-		case 2:/* 13440 Rx Data Fifo Size */
-			lp->afc_cfg=0x008C46AF;break;
-		case 3:/* 12480 Rx Data Fifo Size */
-			lp->afc_cfg=0x0082419F;break;
-		case 4:/* 11520 Rx Data Fifo Size */
-			lp->afc_cfg=0x00783C9F;break;
-		case 5:/* 10560 Rx Data Fifo Size */
-			lp->afc_cfg=0x006E374F;break;
-		case 6:/* 9600 Rx Data Fifo Size */
-			lp->afc_cfg=0x0064328F;break;
-		case 7:/* 8640 Rx Data Fifo Size */
-			lp->afc_cfg=0x005A2D7F;break;
-		case 8:/* 7680 Rx Data Fifo Size */
-			lp->afc_cfg=0x0050287F;break;
-		case 9:/* 6720 Rx Data Fifo Size */
-			lp->afc_cfg=0x0046236F;break;
-		case 10:/* 5760 Rx Data Fifo Size */
-			lp->afc_cfg=0x003C1E6F;break;
-		case 11:/* 4800 Rx Data Fifo Size */
-			lp->afc_cfg=0x0032195F;break;
-		/*
-		 *	 AFC_HI is ~1520 bytes less than RX Data Fifo Size
-		 *	 AFC_LO is AFC_HI/2
-		 *	 BACK_DUR is about 5uS*(AFC_LO) rounded down
-		 */
-		case 12:/* 3840 Rx Data Fifo Size */
-			lp->afc_cfg=0x0024124F;break;
-		case 13:/* 2880 Rx Data Fifo Size */
-			lp->afc_cfg=0x0015073F;break;
-		case 14:/* 1920 Rx Data Fifo Size */
-			lp->afc_cfg=0x0006032F;break;
-		 default:
-			 PRINTK(dev, "ERROR -- no AFC_CFG setting found");
-			 break;
-	}
-
-	DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, dev,
-	    "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
-	    lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
-
-	spin_lock_init(&lp->lock);
-
-	/* Get the MAC address */
-	SMC_GET_MAC_ADDR(lp, addr);
-	eth_hw_addr_set(dev, addr);
-
-	/* now, reset the chip, and put it into a known state */
-	smc911x_reset(dev);
-
-	/*
-	 * If dev->irq is 0, then the device has to be banged on to see
-	 * what the IRQ is.
-	 *
-	 * Specifying an IRQ is done with the assumption that the user knows
-	 * what (s)he is doing.  No checking is done!!!!
-	 */
-	if (dev->irq < 1) {
-		int trials;
-
-		trials = 3;
-		while (trials--) {
-			dev->irq = smc911x_findirq(dev);
-			if (dev->irq)
-				break;
-			/* kick the card and try again */
-			smc911x_reset(dev);
-		}
-	}
-	if (dev->irq == 0) {
-		netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n");
-		retval = -ENODEV;
-		goto err_out;
-	}
-	dev->irq = irq_canonicalize(dev->irq);
-
-	dev->netdev_ops = &smc911x_netdev_ops;
-	dev->watchdog_timeo = msecs_to_jiffies(watchdog);
-	dev->ethtool_ops = &smc911x_ethtool_ops;
-
-	INIT_WORK(&lp->phy_configure, smc911x_phy_configure);
-	lp->mii.phy_id_mask = 0x1f;
-	lp->mii.reg_num_mask = 0x1f;
-	lp->mii.force_media = 0;
-	lp->mii.full_duplex = 0;
-	lp->mii.dev = dev;
-	lp->mii.mdio_read = smc911x_phy_read;
-	lp->mii.mdio_write = smc911x_phy_write;
-
-	/*
-	 * Locate the phy, if any.
-	 */
-	smc911x_phy_detect(dev);
-
-	/* Set default parameters */
-	lp->msg_enable = NETIF_MSG_LINK;
-	lp->ctl_rfduplx = 1;
-	lp->ctl_rspeed = 100;
-
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-	irq_flags = lp->cfg.irq_flags;
-#else
-	irq_flags = IRQF_SHARED | SMC_IRQ_SENSE;
-#endif
-
-	/* Grab the IRQ */
-	retval = request_irq(dev->irq, smc911x_interrupt,
-			     irq_flags, dev->name, dev);
-	if (retval)
-		goto err_out;
-
-#ifdef SMC_USE_DMA
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	lp->rxdma = dma_request_channel(mask, NULL, NULL);
-	lp->txdma = dma_request_channel(mask, NULL, NULL);
-	lp->rxdma_active = 0;
-	lp->txdma_active = 0;
-
-	memset(&config, 0, sizeof(config));
-	config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	config.src_addr = lp->physaddr + RX_DATA_FIFO;
-	config.dst_addr = lp->physaddr + TX_DATA_FIFO;
-	config.src_maxburst = 32;
-	config.dst_maxburst = 32;
-	retval = dmaengine_slave_config(lp->rxdma, &config);
-	if (retval) {
-		dev_err(lp->dev, "dma rx channel configuration failed: %d\n",
-			retval);
-		goto err_out;
-	}
-	retval = dmaengine_slave_config(lp->txdma, &config);
-	if (retval) {
-		dev_err(lp->dev, "dma tx channel configuration failed: %d\n",
-			retval);
-		goto err_out;
-	}
-#endif
-
-	retval = register_netdev(dev);
-	if (retval == 0) {
-		/* now, print out the card info, in a short format.. */
-		netdev_info(dev, "%s (rev %d) at %#lx IRQ %d",
-			    version_string, lp->revision,
-			    dev->base_addr, dev->irq);
-
-#ifdef SMC_USE_DMA
-		if (lp->rxdma)
-			pr_cont(" RXDMA %p", lp->rxdma);
-
-		if (lp->txdma)
-			pr_cont(" TXDMA %p", lp->txdma);
-#endif
-		pr_cont("\n");
-		if (!is_valid_ether_addr(dev->dev_addr)) {
-			netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n");
-		} else {
-			/* Print the Ethernet address */
-			netdev_info(dev, "Ethernet addr: %pM\n",
-				    dev->dev_addr);
-		}
-
-		if (lp->phy_type == 0) {
-			PRINTK(dev, "No PHY found\n");
-		} else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) {
-			PRINTK(dev, "LAN911x Internal PHY\n");
-		} else {
-			PRINTK(dev, "External PHY 0x%08x\n", lp->phy_type);
-		}
-	}
-
-err_out:
-#ifdef SMC_USE_DMA
-	if (retval) {
-		if (lp->rxdma)
-			dma_release_channel(lp->rxdma);
-		if (lp->txdma)
-			dma_release_channel(lp->txdma);
-	}
-#endif
-	return retval;
-}
-
-/*
- * smc911x_drv_probe(void)
- *
- *	  Output:
- *	 0 --> there is a device
- *	 anything else, error
- */
-static int smc911x_drv_probe(struct platform_device *pdev)
-{
-	struct net_device *ndev;
-	struct resource *res;
-	struct smc911x_local *lp;
-	void __iomem *addr;
-	int ret;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENODEV;
-		goto out;
-	}
-
-	/*
-	 * Request the regions.
-	 */
-	if (!request_mem_region(res->start, SMC911X_IO_EXTENT, CARDNAME)) {
-		 ret = -EBUSY;
-		 goto out;
-	}
-
-	ndev = alloc_etherdev(sizeof(struct smc911x_local));
-	if (!ndev) {
-		ret = -ENOMEM;
-		goto release_1;
-	}
-	SET_NETDEV_DEV(ndev, &pdev->dev);
-
-	ndev->dma = (unsigned char)-1;
-	ndev->irq = platform_get_irq(pdev, 0);
-	if (ndev->irq < 0) {
-		ret = ndev->irq;
-		goto release_both;
-	}
-
-	lp = netdev_priv(ndev);
-	lp->netdev = ndev;
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-	{
-		struct smc911x_platdata *pd = dev_get_platdata(&pdev->dev);
-		if (!pd) {
-			ret = -EINVAL;
-			goto release_both;
-		}
-		memcpy(&lp->cfg, pd, sizeof(lp->cfg));
-	}
-#endif
-
-	addr = ioremap(res->start, SMC911X_IO_EXTENT);
-	if (!addr) {
-		ret = -ENOMEM;
-		goto release_both;
-	}
-
-	platform_set_drvdata(pdev, ndev);
-	lp->base = addr;
-	ndev->base_addr = res->start;
-	ret = smc911x_probe(ndev);
-	if (ret != 0) {
-		iounmap(addr);
-release_both:
-		free_netdev(ndev);
-release_1:
-		release_mem_region(res->start, SMC911X_IO_EXTENT);
-out:
-		pr_info("%s: not found (%d).\n", CARDNAME, ret);
-	}
-#ifdef SMC_USE_DMA
-	else {
-		lp->physaddr = res->start;
-		lp->dev = &pdev->dev;
-	}
-#endif
-
-	return ret;
-}
-
-static int smc911x_drv_remove(struct platform_device *pdev)
-{
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	struct smc911x_local *lp = netdev_priv(ndev);
-	struct resource *res;
-
-	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
-
-	unregister_netdev(ndev);
-
-	free_irq(ndev->irq, ndev);
-
-#ifdef SMC_USE_DMA
-	{
-		if (lp->rxdma)
-			dma_release_channel(lp->rxdma);
-		if (lp->txdma)
-			dma_release_channel(lp->txdma);
-	}
-#endif
-	iounmap(lp->base);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, SMC911X_IO_EXTENT);
-
-	free_netdev(ndev);
-	return 0;
-}
-
-static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct net_device *ndev = platform_get_drvdata(dev);
-	struct smc911x_local *lp = netdev_priv(ndev);
-
-	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
-	if (ndev) {
-		if (netif_running(ndev)) {
-			netif_device_detach(ndev);
-			smc911x_shutdown(ndev);
-#if POWER_DOWN
-			/* Set D2 - Energy detect only setting */
-			SMC_SET_PMT_CTRL(lp, 2<<12);
-#endif
-		}
-	}
-	return 0;
-}
-
-static int smc911x_drv_resume(struct platform_device *dev)
-{
-	struct net_device *ndev = platform_get_drvdata(dev);
-
-	DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__);
-	if (ndev) {
-		struct smc911x_local *lp = netdev_priv(ndev);
-
-		if (netif_running(ndev)) {
-			smc911x_reset(ndev);
-			if (lp->phy_type != 0)
-				smc911x_phy_configure(&lp->phy_configure);
-			smc911x_enable(ndev);
-			netif_device_attach(ndev);
-		}
-	}
-	return 0;
-}
-
-static struct platform_driver smc911x_driver = {
-	.probe		 = smc911x_drv_probe,
-	.remove	 = smc911x_drv_remove,
-	.suspend	 = smc911x_drv_suspend,
-	.resume	 = smc911x_drv_resume,
-	.driver	 = {
-		.name	 = CARDNAME,
-	},
-};
-
-module_platform_driver(smc911x_driver);
diff --git a/drivers/net/ethernet/smsc/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
deleted file mode 100644
index d4edcc0da87c..000000000000
--- a/drivers/net/ethernet/smsc/smc911x.h
+++ /dev/null
@@ -1,901 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*------------------------------------------------------------------------
- . smc911x.h - macros for SMSC's LAN911{5,6,7,8} single-chip Ethernet device.
- .
- . Copyright (C) 2005 Sensoria Corp.
- . Derived from the unified SMC91x driver by Nicolas Pitre
- .
- .
- . Information contained in this file was obtained from the LAN9118
- . manual from SMC.  To get a copy, if you really want one, you can find
- . information under www.smsc.com.
- .
- . Authors
- .	 Dustin McIntire		 <dustin@xxxxxxxxxxxx>
- .
- ---------------------------------------------------------------------------*/
-#ifndef _SMC911X_H_
-#define _SMC911X_H_
-
-#include <linux/smc911x.h>
-/*
- * Use the DMA feature on PXA chips
- */
-#ifdef CONFIG_ARCH_PXA
-  #define SMC_USE_PXA_DMA	1
-  #define SMC_USE_16BIT		0
-  #define SMC_USE_32BIT		1
-  #define SMC_IRQ_SENSE		IRQF_TRIGGER_FALLING
-#elif defined(CONFIG_SH_MAGIC_PANEL_R2)
-  #define SMC_USE_16BIT		0
-  #define SMC_USE_32BIT		1
-  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
-#elif defined(CONFIG_ARCH_OMAP3)
-  #define SMC_USE_16BIT		0
-  #define SMC_USE_32BIT		1
-  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
-  #define SMC_MEM_RESERVED	1
-#elif defined(CONFIG_ARCH_OMAP2)
-  #define SMC_USE_16BIT		0
-  #define SMC_USE_32BIT		1
-  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
-  #define SMC_MEM_RESERVED	1
-#else
-/*
- * Default configuration
- */
-
-#define SMC_DYNAMIC_BUS_CONFIG
-#endif
-
-#ifdef SMC_USE_PXA_DMA
-#define SMC_USE_DMA
-#endif
-
-/* store this information for the driver.. */
-struct smc911x_local {
-	/*
-	 * If I have to wait until the DMA is finished and ready to reload a
-	 * packet, I will store the skbuff here. Then, the DMA will send it
-	 * out and free it.
-	 */
-	struct sk_buff *pending_tx_skb;
-
-	/* version/revision of the SMC911x chip */
-	u16 version;
-	u16 revision;
-
-	/* FIFO sizes */
-	int tx_fifo_kb;
-	int tx_fifo_size;
-	int rx_fifo_size;
-	int afc_cfg;
-
-	/* Contains the current active receive/phy mode */
-	int ctl_rfduplx;
-	int ctl_rspeed;
-
-	u32 msg_enable;
-	u32 phy_type;
-	struct mii_if_info mii;
-
-	/* work queue */
-	struct work_struct phy_configure;
-
-	int tx_throttle;
-	spinlock_t lock;
-
-	struct net_device *netdev;
-
-#ifdef SMC_USE_DMA
-	/* DMA needs the physical address of the chip */
-	u_long physaddr;
-	struct dma_chan *rxdma;
-	struct dma_chan *txdma;
-	int rxdma_active;
-	int txdma_active;
-	struct sk_buff *current_rx_skb;
-	struct sk_buff *current_tx_skb;
-	struct device *dev;
-#endif
-	void __iomem *base;
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-	struct smc911x_platdata cfg;
-#endif
-};
-
-/*
- * Define the bus width specific IO macros
- */
-
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-static inline unsigned int SMC_inl(struct smc911x_local *lp, int reg)
-{
-	void __iomem *ioaddr = lp->base + reg;
-
-	if (lp->cfg.flags & SMC911X_USE_32BIT)
-		return readl(ioaddr);
-
-	if (lp->cfg.flags & SMC911X_USE_16BIT)
-		return readw(ioaddr) | (readw(ioaddr + 2) << 16);
-
-	BUG();
-}
-
-static inline void SMC_outl(unsigned int value, struct smc911x_local *lp,
-			    int reg)
-{
-	void __iomem *ioaddr = lp->base + reg;
-
-	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		writel(value, ioaddr);
-		return;
-	}
-
-	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		writew(value & 0xffff, ioaddr);
-		writew(value >> 16, ioaddr + 2);
-		return;
-	}
-
-	BUG();
-}
-
-static inline void SMC_insl(struct smc911x_local *lp, int reg,
-			      void *addr, unsigned int count)
-{
-	void __iomem *ioaddr = lp->base + reg;
-
-	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		ioread32_rep(ioaddr, addr, count);
-		return;
-	}
-
-	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		ioread16_rep(ioaddr, addr, count * 2);
-		return;
-	}
-
-	BUG();
-}
-
-static inline void SMC_outsl(struct smc911x_local *lp, int reg,
-			     void *addr, unsigned int count)
-{
-	void __iomem *ioaddr = lp->base + reg;
-
-	if (lp->cfg.flags & SMC911X_USE_32BIT) {
-		iowrite32_rep(ioaddr, addr, count);
-		return;
-	}
-
-	if (lp->cfg.flags & SMC911X_USE_16BIT) {
-		iowrite16_rep(ioaddr, addr, count * 2);
-		return;
-	}
-
-	BUG();
-}
-#else
-#if	SMC_USE_16BIT
-#define SMC_inl(lp, r)		 ((readw((lp)->base + (r)) & 0xFFFF) + (readw((lp)->base + (r) + 2) << 16))
-#define SMC_outl(v, lp, r) 			 \
-	do{					 \
-		 writew(v & 0xFFFF, (lp)->base + (r));	 \
-		 writew(v >> 16, (lp)->base + (r) + 2); \
-	 } while (0)
-#define SMC_insl(lp, r, p, l)	 ioread16_rep((short*)((lp)->base + (r)), p, l*2)
-#define SMC_outsl(lp, r, p, l)	 iowrite16_rep((short*)((lp)->base + (r)), p, l*2)
-
-#elif	SMC_USE_32BIT
-#define SMC_inl(lp, r)		 readl((lp)->base + (r))
-#define SMC_outl(v, lp, r)	 writel(v, (lp)->base + (r))
-#define SMC_insl(lp, r, p, l)	 ioread32_rep((int*)((lp)->base + (r)), p, l)
-#define SMC_outsl(lp, r, p, l)	 iowrite32_rep((int*)((lp)->base + (r)), p, l)
-
-#endif /* SMC_USE_16BIT */
-#endif /* SMC_DYNAMIC_BUS_CONFIG */
-
-
-#ifdef SMC_USE_PXA_DMA
-
-/*
- * Use a DMA for RX and TX packets.
- */
-#include <linux/dma-mapping.h>
-
-static dma_addr_t rx_dmabuf, tx_dmabuf;
-static int rx_dmalen, tx_dmalen;
-static void smc911x_rx_dma_irq(void *data);
-static void smc911x_tx_dma_irq(void *data);
-
-#ifdef SMC_insl
-#undef SMC_insl
-#define SMC_insl(lp, r, p, l) \
-	smc_pxa_dma_insl(lp, lp->physaddr, r, lp->rxdma, p, l)
-
-static inline void
-smc_pxa_dma_insl(struct smc911x_local *lp, u_long physaddr,
-		int reg, struct dma_chan *dma, u_char *buf, int len)
-{
-	struct dma_async_tx_descriptor *tx;
-
-	/* 64 bit alignment is required for memory to memory DMA */
-	if ((long)buf & 4) {
-		*((u32 *)buf) = SMC_inl(lp, reg);
-		buf += 4;
-		len--;
-	}
-
-	len *= 4;
-	rx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_FROM_DEVICE);
-	rx_dmalen = len;
-	tx = dmaengine_prep_slave_single(dma, rx_dmabuf, rx_dmalen,
-					 DMA_DEV_TO_MEM, 0);
-	if (tx) {
-		tx->callback = smc911x_rx_dma_irq;
-		tx->callback_param = lp;
-		dmaengine_submit(tx);
-		dma_async_issue_pending(dma);
-	}
-}
-#endif
-
-#ifdef SMC_outsl
-#undef SMC_outsl
-#define SMC_outsl(lp, r, p, l) \
-	 smc_pxa_dma_outsl(lp, lp->physaddr, r, lp->txdma, p, l)
-
-static inline void
-smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr,
-		int reg, struct dma_chan *dma, u_char *buf, int len)
-{
-	struct dma_async_tx_descriptor *tx;
-
-	/* 64 bit alignment is required for memory to memory DMA */
-	if ((long)buf & 4) {
-		SMC_outl(*((u32 *)buf), lp, reg);
-		buf += 4;
-		len--;
-	}
-
-	len *= 4;
-	tx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_TO_DEVICE);
-	tx_dmalen = len;
-	tx = dmaengine_prep_slave_single(dma, tx_dmabuf, tx_dmalen,
-					 DMA_DEV_TO_MEM, 0);
-	if (tx) {
-		tx->callback = smc911x_tx_dma_irq;
-		tx->callback_param = lp;
-		dmaengine_submit(tx);
-		dma_async_issue_pending(dma);
-	}
-}
-#endif
-#endif	 /* SMC_USE_PXA_DMA */
-
-
-/* Chip Parameters and Register Definitions */
-
-#define SMC911X_TX_FIFO_LOW_THRESHOLD	(1536*2)
-
-#define SMC911X_IO_EXTENT	 0x100
-
-#define SMC911X_EEPROM_LEN	 7
-
-/* Below are the register offsets and bit definitions
- * of the Lan911x memory space
- */
-#define RX_DATA_FIFO		 (0x00)
-
-#define TX_DATA_FIFO		 (0x20)
-#define	TX_CMD_A_INT_ON_COMP_		(0x80000000)
-#define	TX_CMD_A_INT_BUF_END_ALGN_	(0x03000000)
-#define	TX_CMD_A_INT_4_BYTE_ALGN_	(0x00000000)
-#define	TX_CMD_A_INT_16_BYTE_ALGN_	(0x01000000)
-#define	TX_CMD_A_INT_32_BYTE_ALGN_	(0x02000000)
-#define	TX_CMD_A_INT_DATA_OFFSET_	(0x001F0000)
-#define	TX_CMD_A_INT_FIRST_SEG_		(0x00002000)
-#define	TX_CMD_A_INT_LAST_SEG_		(0x00001000)
-#define	TX_CMD_A_BUF_SIZE_		(0x000007FF)
-#define	TX_CMD_B_PKT_TAG_		(0xFFFF0000)
-#define	TX_CMD_B_ADD_CRC_DISABLE_	(0x00002000)
-#define	TX_CMD_B_DISABLE_PADDING_	(0x00001000)
-#define	TX_CMD_B_PKT_BYTE_LENGTH_	(0x000007FF)
-
-#define RX_STATUS_FIFO		(0x40)
-#define	RX_STS_PKT_LEN_			(0x3FFF0000)
-#define	RX_STS_ES_			(0x00008000)
-#define	RX_STS_BCST_			(0x00002000)
-#define	RX_STS_LEN_ERR_			(0x00001000)
-#define	RX_STS_RUNT_ERR_		(0x00000800)
-#define	RX_STS_MCAST_			(0x00000400)
-#define	RX_STS_TOO_LONG_		(0x00000080)
-#define	RX_STS_COLL_			(0x00000040)
-#define	RX_STS_ETH_TYPE_		(0x00000020)
-#define	RX_STS_WDOG_TMT_		(0x00000010)
-#define	RX_STS_MII_ERR_			(0x00000008)
-#define	RX_STS_DRIBBLING_		(0x00000004)
-#define	RX_STS_CRC_ERR_			(0x00000002)
-#define RX_STATUS_FIFO_PEEK 	(0x44)
-#define TX_STATUS_FIFO		(0x48)
-#define	TX_STS_TAG_			(0xFFFF0000)
-#define	TX_STS_ES_			(0x00008000)
-#define	TX_STS_LOC_			(0x00000800)
-#define	TX_STS_NO_CARR_			(0x00000400)
-#define	TX_STS_LATE_COLL_		(0x00000200)
-#define	TX_STS_MANY_COLL_		(0x00000100)
-#define	TX_STS_COLL_CNT_		(0x00000078)
-#define	TX_STS_MANY_DEFER_		(0x00000004)
-#define	TX_STS_UNDERRUN_		(0x00000002)
-#define	TX_STS_DEFERRED_		(0x00000001)
-#define TX_STATUS_FIFO_PEEK	(0x4C)
-#define ID_REV			(0x50)
-#define	ID_REV_CHIP_ID_			(0xFFFF0000)  /* RO */
-#define	ID_REV_REV_ID_			(0x0000FFFF)  /* RO */
-
-#define INT_CFG			(0x54)
-#define	INT_CFG_INT_DEAS_		(0xFF000000)  /* R/W */
-#define	INT_CFG_INT_DEAS_CLR_		(0x00004000)
-#define	INT_CFG_INT_DEAS_STS_		(0x00002000)
-#define	INT_CFG_IRQ_INT_		(0x00001000)  /* RO */
-#define	INT_CFG_IRQ_EN_			(0x00000100)  /* R/W */
-#define	INT_CFG_IRQ_POL_		(0x00000010)  /* R/W Not Affected by SW Reset */
-#define	INT_CFG_IRQ_TYPE_		(0x00000001)  /* R/W Not Affected by SW Reset */
-
-#define INT_STS			(0x58)
-#define	INT_STS_SW_INT_			(0x80000000)  /* R/WC */
-#define	INT_STS_TXSTOP_INT_		(0x02000000)  /* R/WC */
-#define	INT_STS_RXSTOP_INT_		(0x01000000)  /* R/WC */
-#define	INT_STS_RXDFH_INT_		(0x00800000)  /* R/WC */
-#define	INT_STS_RXDF_INT_		(0x00400000)  /* R/WC */
-#define	INT_STS_TX_IOC_			(0x00200000)  /* R/WC */
-#define	INT_STS_RXD_INT_		(0x00100000)  /* R/WC */
-#define	INT_STS_GPT_INT_		(0x00080000)  /* R/WC */
-#define	INT_STS_PHY_INT_		(0x00040000)  /* RO */
-#define	INT_STS_PME_INT_		(0x00020000)  /* R/WC */
-#define	INT_STS_TXSO_			(0x00010000)  /* R/WC */
-#define	INT_STS_RWT_			(0x00008000)  /* R/WC */
-#define	INT_STS_RXE_			(0x00004000)  /* R/WC */
-#define	INT_STS_TXE_			(0x00002000)  /* R/WC */
-//#define	INT_STS_ERX_		(0x00001000)  /* R/WC */
-#define	INT_STS_TDFU_			(0x00000800)  /* R/WC */
-#define	INT_STS_TDFO_			(0x00000400)  /* R/WC */
-#define	INT_STS_TDFA_			(0x00000200)  /* R/WC */
-#define	INT_STS_TSFF_			(0x00000100)  /* R/WC */
-#define	INT_STS_TSFL_			(0x00000080)  /* R/WC */
-//#define	INT_STS_RXDF_		(0x00000040)  /* R/WC */
-#define	INT_STS_RDFO_			(0x00000040)  /* R/WC */
-#define	INT_STS_RDFL_			(0x00000020)  /* R/WC */
-#define	INT_STS_RSFF_			(0x00000010)  /* R/WC */
-#define	INT_STS_RSFL_			(0x00000008)  /* R/WC */
-#define	INT_STS_GPIO2_INT_		(0x00000004)  /* R/WC */
-#define	INT_STS_GPIO1_INT_		(0x00000002)  /* R/WC */
-#define	INT_STS_GPIO0_INT_		(0x00000001)  /* R/WC */
-
-#define INT_EN			(0x5C)
-#define	INT_EN_SW_INT_EN_		(0x80000000)  /* R/W */
-#define	INT_EN_TXSTOP_INT_EN_		(0x02000000)  /* R/W */
-#define	INT_EN_RXSTOP_INT_EN_		(0x01000000)  /* R/W */
-#define	INT_EN_RXDFH_INT_EN_		(0x00800000)  /* R/W */
-//#define	INT_EN_RXDF_INT_EN_		(0x00400000)  /* R/W */
-#define	INT_EN_TIOC_INT_EN_		(0x00200000)  /* R/W */
-#define	INT_EN_RXD_INT_EN_		(0x00100000)  /* R/W */
-#define	INT_EN_GPT_INT_EN_		(0x00080000)  /* R/W */
-#define	INT_EN_PHY_INT_EN_		(0x00040000)  /* R/W */
-#define	INT_EN_PME_INT_EN_		(0x00020000)  /* R/W */
-#define	INT_EN_TXSO_EN_			(0x00010000)  /* R/W */
-#define	INT_EN_RWT_EN_			(0x00008000)  /* R/W */
-#define	INT_EN_RXE_EN_			(0x00004000)  /* R/W */
-#define	INT_EN_TXE_EN_			(0x00002000)  /* R/W */
-//#define	INT_EN_ERX_EN_			(0x00001000)  /* R/W */
-#define	INT_EN_TDFU_EN_			(0x00000800)  /* R/W */
-#define	INT_EN_TDFO_EN_			(0x00000400)  /* R/W */
-#define	INT_EN_TDFA_EN_			(0x00000200)  /* R/W */
-#define	INT_EN_TSFF_EN_			(0x00000100)  /* R/W */
-#define	INT_EN_TSFL_EN_			(0x00000080)  /* R/W */
-//#define	INT_EN_RXDF_EN_			(0x00000040)  /* R/W */
-#define	INT_EN_RDFO_EN_			(0x00000040)  /* R/W */
-#define	INT_EN_RDFL_EN_			(0x00000020)  /* R/W */
-#define	INT_EN_RSFF_EN_			(0x00000010)  /* R/W */
-#define	INT_EN_RSFL_EN_			(0x00000008)  /* R/W */
-#define	INT_EN_GPIO2_INT_		(0x00000004)  /* R/W */
-#define	INT_EN_GPIO1_INT_		(0x00000002)  /* R/W */
-#define	INT_EN_GPIO0_INT_		(0x00000001)  /* R/W */
-
-#define BYTE_TEST		(0x64)
-#define FIFO_INT		(0x68)
-#define	FIFO_INT_TX_AVAIL_LEVEL_	(0xFF000000)  /* R/W */
-#define	FIFO_INT_TX_STS_LEVEL_		(0x00FF0000)  /* R/W */
-#define	FIFO_INT_RX_AVAIL_LEVEL_	(0x0000FF00)  /* R/W */
-#define	FIFO_INT_RX_STS_LEVEL_		(0x000000FF)  /* R/W */
-
-#define RX_CFG			(0x6C)
-#define	RX_CFG_RX_END_ALGN_		(0xC0000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN4_		(0x00000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN16_		(0x40000000)  /* R/W */
-#define		RX_CFG_RX_END_ALGN32_		(0x80000000)  /* R/W */
-#define	RX_CFG_RX_DMA_CNT_		(0x0FFF0000)  /* R/W */
-#define	RX_CFG_RX_DUMP_			(0x00008000)  /* R/W */
-#define	RX_CFG_RXDOFF_			(0x00001F00)  /* R/W */
-//#define	RX_CFG_RXBAD_			(0x00000001)  /* R/W */
-
-#define TX_CFG			(0x70)
-//#define	TX_CFG_TX_DMA_LVL_		(0xE0000000)	 /* R/W */
-//#define	TX_CFG_TX_DMA_CNT_		(0x0FFF0000)	 /* R/W Self Clearing */
-#define	TX_CFG_TXS_DUMP_		(0x00008000)  /* Self Clearing */
-#define	TX_CFG_TXD_DUMP_		(0x00004000)  /* Self Clearing */
-#define	TX_CFG_TXSAO_			(0x00000004)  /* R/W */
-#define	TX_CFG_TX_ON_			(0x00000002)  /* R/W */
-#define	TX_CFG_STOP_TX_			(0x00000001)  /* Self Clearing */
-
-#define HW_CFG			(0x74)
-#define	HW_CFG_TTM_			(0x00200000)  /* R/W */
-#define	HW_CFG_SF_			(0x00100000)  /* R/W */
-#define	HW_CFG_TX_FIF_SZ_		(0x000F0000)  /* R/W */
-#define	HW_CFG_TR_			(0x00003000)  /* R/W */
-#define	HW_CFG_PHY_CLK_SEL_		(0x00000060)  /* R/W */
-#define		 HW_CFG_PHY_CLK_SEL_INT_PHY_ 	(0x00000000) /* R/W */
-#define		 HW_CFG_PHY_CLK_SEL_EXT_PHY_ 	(0x00000020) /* R/W */
-#define		 HW_CFG_PHY_CLK_SEL_CLK_DIS_ 	(0x00000040) /* R/W */
-#define	HW_CFG_SMI_SEL_			(0x00000010)  /* R/W */
-#define	HW_CFG_EXT_PHY_DET_		(0x00000008)  /* RO */
-#define	HW_CFG_EXT_PHY_EN_		(0x00000004)  /* R/W */
-#define	HW_CFG_32_16_BIT_MODE_		(0x00000004)  /* RO */
-#define	HW_CFG_SRST_TO_			(0x00000002)  /* RO */
-#define	HW_CFG_SRST_			(0x00000001)  /* Self Clearing */
-
-#define RX_DP_CTRL		(0x78)
-#define	RX_DP_CTRL_RX_FFWD_		(0x80000000)  /* R/W */
-#define	RX_DP_CTRL_FFWD_BUSY_		(0x80000000)  /* RO */
-
-#define RX_FIFO_INF		(0x7C)
-#define	 RX_FIFO_INF_RXSUSED_		(0x00FF0000)  /* RO */
-#define	 RX_FIFO_INF_RXDUSED_		(0x0000FFFF)  /* RO */
-
-#define TX_FIFO_INF		(0x80)
-#define	TX_FIFO_INF_TSUSED_		(0x00FF0000)  /* RO */
-#define	TX_FIFO_INF_TDFREE_		(0x0000FFFF)  /* RO */
-
-#define PMT_CTRL		(0x84)
-#define	PMT_CTRL_PM_MODE_		(0x00003000)  /* Self Clearing */
-#define	PMT_CTRL_PHY_RST_		(0x00000400)  /* Self Clearing */
-#define	PMT_CTRL_WOL_EN_		(0x00000200)  /* R/W */
-#define	PMT_CTRL_ED_EN_			(0x00000100)  /* R/W */
-#define	PMT_CTRL_PME_TYPE_		(0x00000040)  /* R/W Not Affected by SW Reset */
-#define	PMT_CTRL_WUPS_			(0x00000030)  /* R/WC */
-#define		PMT_CTRL_WUPS_NOWAKE_		(0x00000000)  /* R/WC */
-#define		PMT_CTRL_WUPS_ED_		(0x00000010)  /* R/WC */
-#define		PMT_CTRL_WUPS_WOL_		(0x00000020)  /* R/WC */
-#define		PMT_CTRL_WUPS_MULTI_		(0x00000030)  /* R/WC */
-#define	PMT_CTRL_PME_IND_		(0x00000008)  /* R/W */
-#define	PMT_CTRL_PME_POL_		(0x00000004)  /* R/W */
-#define	PMT_CTRL_PME_EN_		(0x00000002)  /* R/W Not Affected by SW Reset */
-#define	PMT_CTRL_READY_			(0x00000001)  /* RO */
-
-#define GPIO_CFG		(0x88)
-#define	GPIO_CFG_LED3_EN_		(0x40000000)  /* R/W */
-#define	GPIO_CFG_LED2_EN_		(0x20000000)  /* R/W */
-#define	GPIO_CFG_LED1_EN_		(0x10000000)  /* R/W */
-#define	GPIO_CFG_GPIO2_INT_POL_		(0x04000000)  /* R/W */
-#define	GPIO_CFG_GPIO1_INT_POL_		(0x02000000)  /* R/W */
-#define	GPIO_CFG_GPIO0_INT_POL_		(0x01000000)  /* R/W */
-#define	GPIO_CFG_EEPR_EN_		(0x00700000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF2_		(0x00040000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF1_		(0x00020000)  /* R/W */
-#define	GPIO_CFG_GPIOBUF0_		(0x00010000)  /* R/W */
-#define	GPIO_CFG_GPIODIR2_		(0x00000400)  /* R/W */
-#define	GPIO_CFG_GPIODIR1_		(0x00000200)  /* R/W */
-#define	GPIO_CFG_GPIODIR0_		(0x00000100)  /* R/W */
-#define	GPIO_CFG_GPIOD4_		(0x00000010)  /* R/W */
-#define	GPIO_CFG_GPIOD3_		(0x00000008)  /* R/W */
-#define	GPIO_CFG_GPIOD2_		(0x00000004)  /* R/W */
-#define	GPIO_CFG_GPIOD1_		(0x00000002)  /* R/W */
-#define	GPIO_CFG_GPIOD0_		(0x00000001)  /* R/W */
-
-#define GPT_CFG			(0x8C)
-#define	GPT_CFG_TIMER_EN_		(0x20000000)  /* R/W */
-#define	GPT_CFG_GPT_LOAD_		(0x0000FFFF)  /* R/W */
-
-#define GPT_CNT			(0x90)
-#define	GPT_CNT_GPT_CNT_		(0x0000FFFF)  /* RO */
-
-#define ENDIAN			(0x98)
-#define FREE_RUN		(0x9C)
-#define RX_DROP			(0xA0)
-#define MAC_CSR_CMD		(0xA4)
-#define	 MAC_CSR_CMD_CSR_BUSY_		(0x80000000)  /* Self Clearing */
-#define	 MAC_CSR_CMD_R_NOT_W_		(0x40000000)  /* R/W */
-#define	 MAC_CSR_CMD_CSR_ADDR_		(0x000000FF)  /* R/W */
-
-#define MAC_CSR_DATA		(0xA8)
-#define AFC_CFG			(0xAC)
-#define		AFC_CFG_AFC_HI_			(0x00FF0000)  /* R/W */
-#define		AFC_CFG_AFC_LO_			(0x0000FF00)  /* R/W */
-#define		AFC_CFG_BACK_DUR_		(0x000000F0)  /* R/W */
-#define		AFC_CFG_FCMULT_			(0x00000008)  /* R/W */
-#define		AFC_CFG_FCBRD_			(0x00000004)  /* R/W */
-#define		AFC_CFG_FCADD_			(0x00000002)  /* R/W */
-#define		AFC_CFG_FCANY_			(0x00000001)  /* R/W */
-
-#define E2P_CMD			(0xB0)
-#define	E2P_CMD_EPC_BUSY_		(0x80000000)  /* Self Clearing */
-#define	E2P_CMD_EPC_CMD_			(0x70000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_READ_		(0x00000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_EWDS_		(0x10000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_EWEN_		(0x20000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_WRITE_		(0x30000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_WRAL_		(0x40000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_ERASE_		(0x50000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_ERAL_		(0x60000000)  /* R/W */
-#define		E2P_CMD_EPC_CMD_RELOAD_		(0x70000000)  /* R/W */
-#define	E2P_CMD_EPC_TIMEOUT_		(0x00000200)  /* RO */
-#define	E2P_CMD_MAC_ADDR_LOADED_	(0x00000100)  /* RO */
-#define	E2P_CMD_EPC_ADDR_		(0x000000FF)  /* R/W */
-
-#define E2P_DATA		(0xB4)
-#define	E2P_DATA_EEPROM_DATA_		(0x000000FF)  /* R/W */
-/* end of LAN register offsets and bit definitions */
-
-/*
- ****************************************************************************
- ****************************************************************************
- * MAC Control and Status Register (Indirect Address)
- * Offset (through the MAC_CSR CMD and DATA port)
- ****************************************************************************
- ****************************************************************************
- *
- */
-#define MAC_CR			(0x01)  /* R/W */
-
-/* MAC_CR - MAC Control Register */
-#define MAC_CR_RXALL_			(0x80000000)
-// TODO: delete this bit? It is not described in the data sheet.
-#define MAC_CR_HBDIS_			(0x10000000)
-#define MAC_CR_RCVOWN_			(0x00800000)
-#define MAC_CR_LOOPBK_			(0x00200000)
-#define MAC_CR_FDPX_			(0x00100000)
-#define MAC_CR_MCPAS_			(0x00080000)
-#define MAC_CR_PRMS_			(0x00040000)
-#define MAC_CR_INVFILT_			(0x00020000)
-#define MAC_CR_PASSBAD_			(0x00010000)
-#define MAC_CR_HFILT_			(0x00008000)
-#define MAC_CR_HPFILT_			(0x00002000)
-#define MAC_CR_LCOLL_			(0x00001000)
-#define MAC_CR_BCAST_			(0x00000800)
-#define MAC_CR_DISRTY_			(0x00000400)
-#define MAC_CR_PADSTR_			(0x00000100)
-#define MAC_CR_BOLMT_MASK_		(0x000000C0)
-#define MAC_CR_DFCHK_			(0x00000020)
-#define MAC_CR_TXEN_			(0x00000008)
-#define MAC_CR_RXEN_			(0x00000004)
-
-#define ADDRH			(0x02)	  /* R/W mask 0x0000FFFFUL */
-#define ADDRL			(0x03)	  /* R/W mask 0xFFFFFFFFUL */
-#define HASHH			(0x04)	  /* R/W */
-#define HASHL			(0x05)	  /* R/W */
-
-#define MII_ACC			(0x06)	  /* R/W */
-#define MII_ACC_PHY_ADDR_		(0x0000F800)
-#define MII_ACC_MIIRINDA_		(0x000007C0)
-#define MII_ACC_MII_WRITE_		(0x00000002)
-#define MII_ACC_MII_BUSY_		(0x00000001)
-
-#define MII_DATA		(0x07)	  /* R/W mask 0x0000FFFFUL */
-
-#define FLOW			(0x08)	  /* R/W */
-#define FLOW_FCPT_			(0xFFFF0000)
-#define FLOW_FCPASS_			(0x00000004)
-#define FLOW_FCEN_			(0x00000002)
-#define FLOW_FCBSY_			(0x00000001)
-
-#define VLAN1			(0x09)	  /* R/W mask 0x0000FFFFUL */
-#define VLAN1_VTI1_			(0x0000ffff)
-
-#define VLAN2			(0x0A)	  /* R/W mask 0x0000FFFFUL */
-#define VLAN2_VTI2_			(0x0000ffff)
-
-#define WUFF			(0x0B)	  /* WO */
-
-#define WUCSR			(0x0C)	  /* R/W */
-#define WUCSR_GUE_			(0x00000200)
-#define WUCSR_WUFR_			(0x00000040)
-#define WUCSR_MPR_			(0x00000020)
-#define WUCSR_WAKE_EN_			(0x00000004)
-#define WUCSR_MPEN_			(0x00000002)
-
-/*
- ****************************************************************************
- * Chip Specific MII Defines
- ****************************************************************************
- *
- * Phy register offsets and bit definitions
- *
- */
-
-#define PHY_MODE_CTRL_STS	((u32)17)	/* Mode Control/Status Register */
-//#define MODE_CTRL_STS_FASTRIP_	  ((u16)0x4000)
-#define MODE_CTRL_STS_EDPWRDOWN_	 ((u16)0x2000)
-//#define MODE_CTRL_STS_LOWSQEN_	   ((u16)0x0800)
-//#define MODE_CTRL_STS_MDPREBP_	   ((u16)0x0400)
-//#define MODE_CTRL_STS_FARLOOPBACK_  ((u16)0x0200)
-//#define MODE_CTRL_STS_FASTEST_	   ((u16)0x0100)
-//#define MODE_CTRL_STS_REFCLKEN_	   ((u16)0x0010)
-//#define MODE_CTRL_STS_PHYADBP_	   ((u16)0x0008)
-//#define MODE_CTRL_STS_FORCE_G_LINK_ ((u16)0x0004)
-#define MODE_CTRL_STS_ENERGYON_	 	((u16)0x0002)
-
-#define PHY_INT_SRC			((u32)29)
-#define PHY_INT_SRC_ENERGY_ON_			((u16)0x0080)
-#define PHY_INT_SRC_ANEG_COMP_			((u16)0x0040)
-#define PHY_INT_SRC_REMOTE_FAULT_		((u16)0x0020)
-#define PHY_INT_SRC_LINK_DOWN_			((u16)0x0010)
-#define PHY_INT_SRC_ANEG_LP_ACK_		((u16)0x0008)
-#define PHY_INT_SRC_PAR_DET_FAULT_		((u16)0x0004)
-#define PHY_INT_SRC_ANEG_PGRX_			((u16)0x0002)
-
-#define PHY_INT_MASK			((u32)30)
-#define PHY_INT_MASK_ENERGY_ON_			((u16)0x0080)
-#define PHY_INT_MASK_ANEG_COMP_			((u16)0x0040)
-#define PHY_INT_MASK_REMOTE_FAULT_		((u16)0x0020)
-#define PHY_INT_MASK_LINK_DOWN_			((u16)0x0010)
-#define PHY_INT_MASK_ANEG_LP_ACK_		((u16)0x0008)
-#define PHY_INT_MASK_PAR_DET_FAULT_		((u16)0x0004)
-#define PHY_INT_MASK_ANEG_PGRX_			((u16)0x0002)
-
-#define PHY_SPECIAL			((u32)31)
-#define PHY_SPECIAL_ANEG_DONE_			((u16)0x1000)
-#define PHY_SPECIAL_RES_			((u16)0x0040)
-#define PHY_SPECIAL_RES_MASK_			((u16)0x0FE1)
-#define PHY_SPECIAL_SPD_			((u16)0x001C)
-#define PHY_SPECIAL_SPD_10HALF_			((u16)0x0004)
-#define PHY_SPECIAL_SPD_10FULL_			((u16)0x0014)
-#define PHY_SPECIAL_SPD_100HALF_		((u16)0x0008)
-#define PHY_SPECIAL_SPD_100FULL_		((u16)0x0018)
-
-#define LAN911X_INTERNAL_PHY_ID		(0x0007C000)
-
-/* Chip ID values */
-#define CHIP_9115	0x0115
-#define CHIP_9116	0x0116
-#define CHIP_9117	0x0117
-#define CHIP_9118	0x0118
-#define CHIP_9211	0x9211
-#define CHIP_9215	0x115A
-#define CHIP_9217	0x117A
-#define CHIP_9218	0x118A
-
-struct chip_id {
-	u16 id;
-	char *name;
-};
-
-static const struct chip_id chip_ids[] =  {
-	{ CHIP_9115, "LAN9115" },
-	{ CHIP_9116, "LAN9116" },
-	{ CHIP_9117, "LAN9117" },
-	{ CHIP_9118, "LAN9118" },
-	{ CHIP_9211, "LAN9211" },
-	{ CHIP_9215, "LAN9215" },
-	{ CHIP_9217, "LAN9217" },
-	{ CHIP_9218, "LAN9218" },
-	{ 0, NULL },
-};
-
-#define IS_REV_A(x)	((x & 0xFFFF)==0)
-
-/*
- * Macros to abstract register access according to the data bus
- * capabilities.  Please use those and not the in/out primitives.
- */
-/* FIFO read/write macros */
-#define SMC_PUSH_DATA(lp, p, l)	SMC_outsl( lp, TX_DATA_FIFO, p, (l) >> 2 )
-#define SMC_PULL_DATA(lp, p, l)	SMC_insl ( lp, RX_DATA_FIFO, p, (l) >> 2 )
-#define SMC_SET_TX_FIFO(lp, x) 	SMC_outl( x, lp, TX_DATA_FIFO )
-#define SMC_GET_RX_FIFO(lp)	SMC_inl( lp, RX_DATA_FIFO )
-
-
-/* I/O mapped register read/write macros */
-#define SMC_GET_TX_STS_FIFO(lp)		SMC_inl( lp, TX_STATUS_FIFO )
-#define SMC_GET_RX_STS_FIFO(lp)		SMC_inl( lp, RX_STATUS_FIFO )
-#define SMC_GET_RX_STS_FIFO_PEEK(lp)	SMC_inl( lp, RX_STATUS_FIFO_PEEK )
-#define SMC_GET_PN(lp)			(SMC_inl( lp, ID_REV ) >> 16)
-#define SMC_GET_REV(lp)			(SMC_inl( lp, ID_REV ) & 0xFFFF)
-#define SMC_GET_IRQ_CFG(lp)		SMC_inl( lp, INT_CFG )
-#define SMC_SET_IRQ_CFG(lp, x)		SMC_outl( x, lp, INT_CFG )
-#define SMC_GET_INT(lp)			SMC_inl( lp, INT_STS )
-#define SMC_ACK_INT(lp, x)			SMC_outl( x, lp, INT_STS )
-#define SMC_GET_INT_EN(lp)		SMC_inl( lp, INT_EN )
-#define SMC_SET_INT_EN(lp, x)		SMC_outl( x, lp, INT_EN )
-#define SMC_GET_BYTE_TEST(lp)		SMC_inl( lp, BYTE_TEST )
-#define SMC_SET_BYTE_TEST(lp, x)		SMC_outl( x, lp, BYTE_TEST )
-#define SMC_GET_FIFO_INT(lp)		SMC_inl( lp, FIFO_INT )
-#define SMC_SET_FIFO_INT(lp, x)		SMC_outl( x, lp, FIFO_INT )
-#define SMC_SET_FIFO_TDA(lp, x)					\
-	do {							\
-		unsigned long __flags;				\
-		int __mask;					\
-		local_irq_save(__flags);			\
-		__mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<24);	\
-		SMC_SET_FIFO_INT( (lp), __mask | (x)<<24 );	\
-		local_irq_restore(__flags);			\
-	} while (0)
-#define SMC_SET_FIFO_TSL(lp, x)					\
-	do {							\
-		unsigned long __flags;				\
-		int __mask;					\
-		local_irq_save(__flags);			\
-		__mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<16);	\
-		SMC_SET_FIFO_INT( (lp), __mask | (((x) & 0xFF)<<16));	\
-		local_irq_restore(__flags);			\
-	} while (0)
-#define SMC_SET_FIFO_RSA(lp, x)					\
-	do {							\
-		unsigned long __flags;				\
-		int __mask;					\
-		local_irq_save(__flags);			\
-		__mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<8);	\
-		SMC_SET_FIFO_INT( (lp), __mask | (((x) & 0xFF)<<8));	\
-		local_irq_restore(__flags);			\
-	} while (0)
-#define SMC_SET_FIFO_RSL(lp, x)					\
-	do {							\
-		unsigned long __flags;				\
-		int __mask;					\
-		local_irq_save(__flags);			\
-		__mask = SMC_GET_FIFO_INT((lp)) & ~0xFF;	\
-		SMC_SET_FIFO_INT( (lp),__mask | ((x) & 0xFF));	\
-		local_irq_restore(__flags);			\
-	} while (0)
-#define SMC_GET_RX_CFG(lp)		SMC_inl( lp, RX_CFG )
-#define SMC_SET_RX_CFG(lp, x)		SMC_outl( x, lp, RX_CFG )
-#define SMC_GET_TX_CFG(lp)		SMC_inl( lp, TX_CFG )
-#define SMC_SET_TX_CFG(lp, x)		SMC_outl( x, lp, TX_CFG )
-#define SMC_GET_HW_CFG(lp)		SMC_inl( lp, HW_CFG )
-#define SMC_SET_HW_CFG(lp, x)		SMC_outl( x, lp, HW_CFG )
-#define SMC_GET_RX_DP_CTRL(lp)		SMC_inl( lp, RX_DP_CTRL )
-#define SMC_SET_RX_DP_CTRL(lp, x)		SMC_outl( x, lp, RX_DP_CTRL )
-#define SMC_GET_PMT_CTRL(lp)		SMC_inl( lp, PMT_CTRL )
-#define SMC_SET_PMT_CTRL(lp, x)		SMC_outl( x, lp, PMT_CTRL )
-#define SMC_GET_GPIO_CFG(lp)		SMC_inl( lp, GPIO_CFG )
-#define SMC_SET_GPIO_CFG(lp, x)		SMC_outl( x, lp, GPIO_CFG )
-#define SMC_GET_RX_FIFO_INF(lp)		SMC_inl( lp, RX_FIFO_INF )
-#define SMC_SET_RX_FIFO_INF(lp, x)		SMC_outl( x, lp, RX_FIFO_INF )
-#define SMC_GET_TX_FIFO_INF(lp)		SMC_inl( lp, TX_FIFO_INF )
-#define SMC_SET_TX_FIFO_INF(lp, x)		SMC_outl( x, lp, TX_FIFO_INF )
-#define SMC_GET_GPT_CFG(lp)		SMC_inl( lp, GPT_CFG )
-#define SMC_SET_GPT_CFG(lp, x)		SMC_outl( x, lp, GPT_CFG )
-#define SMC_GET_RX_DROP(lp)		SMC_inl( lp, RX_DROP )
-#define SMC_SET_RX_DROP(lp, x)		SMC_outl( x, lp, RX_DROP )
-#define SMC_GET_MAC_CMD(lp)		SMC_inl( lp, MAC_CSR_CMD )
-#define SMC_SET_MAC_CMD(lp, x)		SMC_outl( x, lp, MAC_CSR_CMD )
-#define SMC_GET_MAC_DATA(lp)		SMC_inl( lp, MAC_CSR_DATA )
-#define SMC_SET_MAC_DATA(lp, x)		SMC_outl( x, lp, MAC_CSR_DATA )
-#define SMC_GET_AFC_CFG(lp)		SMC_inl( lp, AFC_CFG )
-#define SMC_SET_AFC_CFG(lp, x)		SMC_outl( x, lp, AFC_CFG )
-#define SMC_GET_E2P_CMD(lp)		SMC_inl( lp, E2P_CMD )
-#define SMC_SET_E2P_CMD(lp, x)		SMC_outl( x, lp, E2P_CMD )
-#define SMC_GET_E2P_DATA(lp)		SMC_inl( lp, E2P_DATA )
-#define SMC_SET_E2P_DATA(lp, x)		SMC_outl( x, lp, E2P_DATA )
-
-/* MAC register read/write macros */
-#define SMC_GET_MAC_CSR(lp,a,v)						\
-	do {								\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-		SMC_SET_MAC_CMD((lp),MAC_CSR_CMD_CSR_BUSY_ |		\
-			MAC_CSR_CMD_R_NOT_W_ | (a) );			\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-		v = SMC_GET_MAC_DATA((lp));			       	\
-	} while (0)
-#define SMC_SET_MAC_CSR(lp,a,v)						\
-	do {								\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-		SMC_SET_MAC_DATA((lp), v);				\
-		SMC_SET_MAC_CMD((lp), MAC_CSR_CMD_CSR_BUSY_ | (a) );	\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-	} while (0)
-#define SMC_GET_MAC_CR(lp, x)	SMC_GET_MAC_CSR( (lp), MAC_CR, x )
-#define SMC_SET_MAC_CR(lp, x)	SMC_SET_MAC_CSR( (lp), MAC_CR, x )
-#define SMC_GET_ADDRH(lp, x)	SMC_GET_MAC_CSR( (lp), ADDRH, x )
-#define SMC_SET_ADDRH(lp, x)	SMC_SET_MAC_CSR( (lp), ADDRH, x )
-#define SMC_GET_ADDRL(lp, x)	SMC_GET_MAC_CSR( (lp), ADDRL, x )
-#define SMC_SET_ADDRL(lp, x)	SMC_SET_MAC_CSR( (lp), ADDRL, x )
-#define SMC_GET_HASHH(lp, x)	SMC_GET_MAC_CSR( (lp), HASHH, x )
-#define SMC_SET_HASHH(lp, x)	SMC_SET_MAC_CSR( (lp), HASHH, x )
-#define SMC_GET_HASHL(lp, x)	SMC_GET_MAC_CSR( (lp), HASHL, x )
-#define SMC_SET_HASHL(lp, x)	SMC_SET_MAC_CSR( (lp), HASHL, x )
-#define SMC_GET_MII_ACC(lp, x)	SMC_GET_MAC_CSR( (lp), MII_ACC, x )
-#define SMC_SET_MII_ACC(lp, x)	SMC_SET_MAC_CSR( (lp), MII_ACC, x )
-#define SMC_GET_MII_DATA(lp, x)	SMC_GET_MAC_CSR( (lp), MII_DATA, x )
-#define SMC_SET_MII_DATA(lp, x)	SMC_SET_MAC_CSR( (lp), MII_DATA, x )
-#define SMC_GET_FLOW(lp, x)		SMC_GET_MAC_CSR( (lp), FLOW, x )
-#define SMC_SET_FLOW(lp, x)		SMC_SET_MAC_CSR( (lp), FLOW, x )
-#define SMC_GET_VLAN1(lp, x)	SMC_GET_MAC_CSR( (lp), VLAN1, x )
-#define SMC_SET_VLAN1(lp, x)	SMC_SET_MAC_CSR( (lp), VLAN1, x )
-#define SMC_GET_VLAN2(lp, x)	SMC_GET_MAC_CSR( (lp), VLAN2, x )
-#define SMC_SET_VLAN2(lp, x)	SMC_SET_MAC_CSR( (lp), VLAN2, x )
-#define SMC_SET_WUFF(lp, x)		SMC_SET_MAC_CSR( (lp), WUFF, x )
-#define SMC_GET_WUCSR(lp, x)	SMC_GET_MAC_CSR( (lp), WUCSR, x )
-#define SMC_SET_WUCSR(lp, x)	SMC_SET_MAC_CSR( (lp), WUCSR, x )
-
-/* PHY register read/write macros */
-#define SMC_GET_MII(lp,a,phy,v)					\
-	do {							\
-		u32 __v;					\
-		do {						\
-			SMC_GET_MII_ACC((lp), __v);			\
-		} while ( __v & MII_ACC_MII_BUSY_ );		\
-		SMC_SET_MII_ACC( (lp), ((phy)<<11) | ((a)<<6) |	\
-			MII_ACC_MII_BUSY_);			\
-		do {						\
-			SMC_GET_MII_ACC( (lp), __v);			\
-		} while ( __v & MII_ACC_MII_BUSY_ );		\
-		SMC_GET_MII_DATA((lp), v);				\
-	} while (0)
-#define SMC_SET_MII(lp,a,phy,v)					\
-	do {							\
-		u32 __v;					\
-		do {						\
-			SMC_GET_MII_ACC((lp), __v);			\
-		} while ( __v & MII_ACC_MII_BUSY_ );		\
-		SMC_SET_MII_DATA((lp), v);				\
-		SMC_SET_MII_ACC( (lp), ((phy)<<11) | ((a)<<6) |	\
-			MII_ACC_MII_BUSY_	 |		\
-			MII_ACC_MII_WRITE_  );			\
-		do {						\
-			SMC_GET_MII_ACC((lp), __v);			\
-		} while ( __v & MII_ACC_MII_BUSY_ );		\
-	} while (0)
-#define SMC_GET_PHY_BMCR(lp,phy,x)		SMC_GET_MII( (lp), MII_BMCR, phy, x )
-#define SMC_SET_PHY_BMCR(lp,phy,x)		SMC_SET_MII( (lp), MII_BMCR, phy, x )
-#define SMC_GET_PHY_BMSR(lp,phy,x)		SMC_GET_MII( (lp), MII_BMSR, phy, x )
-#define SMC_GET_PHY_ID1(lp,phy,x)		SMC_GET_MII( (lp), MII_PHYSID1, phy, x )
-#define SMC_GET_PHY_ID2(lp,phy,x)		SMC_GET_MII( (lp), MII_PHYSID2, phy, x )
-#define SMC_GET_PHY_MII_ADV(lp,phy,x)	SMC_GET_MII( (lp), MII_ADVERTISE, phy, x )
-#define SMC_SET_PHY_MII_ADV(lp,phy,x)	SMC_SET_MII( (lp), MII_ADVERTISE, phy, x )
-#define SMC_GET_PHY_MII_LPA(lp,phy,x)	SMC_GET_MII( (lp), MII_LPA, phy, x )
-#define SMC_SET_PHY_MII_LPA(lp,phy,x)	SMC_SET_MII( (lp), MII_LPA, phy, x )
-#define SMC_GET_PHY_CTRL_STS(lp,phy,x)	SMC_GET_MII( (lp), PHY_MODE_CTRL_STS, phy, x )
-#define SMC_SET_PHY_CTRL_STS(lp,phy,x)	SMC_SET_MII( (lp), PHY_MODE_CTRL_STS, phy, x )
-#define SMC_GET_PHY_INT_SRC(lp,phy,x)	SMC_GET_MII( (lp), PHY_INT_SRC, phy, x )
-#define SMC_SET_PHY_INT_SRC(lp,phy,x)	SMC_SET_MII( (lp), PHY_INT_SRC, phy, x )
-#define SMC_GET_PHY_INT_MASK(lp,phy,x)	SMC_GET_MII( (lp), PHY_INT_MASK, phy, x )
-#define SMC_SET_PHY_INT_MASK(lp,phy,x)	SMC_SET_MII( (lp), PHY_INT_MASK, phy, x )
-#define SMC_GET_PHY_SPECIAL(lp,phy,x)	SMC_GET_MII( (lp), PHY_SPECIAL, phy, x )
-
-
-
-/* Misc read/write macros */
-
-#ifndef SMC_GET_MAC_ADDR
-#define SMC_GET_MAC_ADDR(lp, addr)				\
-	do {							\
-		unsigned int __v;				\
-								\
-		SMC_GET_MAC_CSR((lp), ADDRL, __v);			\
-		addr[0] = __v; addr[1] = __v >> 8;		\
-		addr[2] = __v >> 16; addr[3] = __v >> 24;	\
-		SMC_GET_MAC_CSR((lp), ADDRH, __v);			\
-		addr[4] = __v; addr[5] = __v >> 8;		\
-	} while (0)
-#endif
-
-#define SMC_SET_MAC_ADDR(lp, addr)				\
-	do {							\
-		 SMC_SET_MAC_CSR((lp), ADDRL,				\
-				 addr[0] |			\
-				(addr[1] << 8) |		\
-				(addr[2] << 16) |		\
-				(addr[3] << 24));		\
-		 SMC_SET_MAC_CSR((lp), ADDRH, addr[4]|(addr[5] << 8));\
-	} while (0)
-
-
-#define SMC_WRITE_EEPROM_CMD(lp, cmd, addr)				\
-	do {								\
-		while (SMC_GET_E2P_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-		SMC_SET_MAC_CMD((lp), MAC_CSR_CMD_R_NOT_W_ | a );		\
-		while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_);	\
-	} while (0)
-
-#endif	 /* _SMC911X_H_ */
diff --git a/include/linux/smc911x.h b/include/linux/smc911x.h
deleted file mode 100644
index 8cace8189e74..000000000000
--- a/include/linux/smc911x.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SMC911X_H__
-#define __SMC911X_H__
-
-#define SMC911X_USE_16BIT (1 << 0)
-#define SMC911X_USE_32BIT (1 << 1)
-
-struct smc911x_platdata {
-	unsigned long flags;
-	unsigned long irq_flags; /* IRQF_... */
-	int irq_polarity;
-};
-
-#endif /* __SMC911X_H__ */
-- 
2.29.2