Re: [PATCH v7 12/12] Documentation/x86: Update resctrl.rst for new features

[Bagas Sanjaya]

On Mon, Oct 17, 2022 at 05:27:34PM -0500, Babu Moger wrote:
> Update the documentation for the new features:
> 1. Slow Memory Bandwidth allocation (SMBA).
>    With this feature, the QOS  enforcement policies can be applied
>    to the external slow memory connected to the host. QOS enforcement
>    is accomplished by assigning a Class Of Service (COS) to a processor
>    and specifying allocations or limits for that COS for each resource
>    to be allocated.
> 
> 2. Bandwidth Monitoring Event Configuration (BMEC).
>    The bandwidth monitoring events mbm_total_bytes and mbm_local_bytes
>    are set to count all the total and local reads/writes respectively.
>    With the introduction of slow memory, the two counters are not
>    enough to count all the different types of memory events. With the
>    feature BMEC, the users have the option to configure mbm_total_bytes
>    and mbm_local_bytes to count the specific type of events.
> 
> Also add configuration instructions with examples.
> 
> Signed-off-by: Babu Moger <babu.moger@xxxxxxx>
> ---
>  Documentation/x86/resctrl.rst |  139 ++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 137 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/x86/resctrl.rst b/Documentation/x86/resctrl.rst
> index 71a531061e4e..d0b4e1a2cb8d 100644
> --- a/Documentation/x86/resctrl.rst
> +++ b/Documentation/x86/resctrl.rst
> @@ -17,14 +17,16 @@ AMD refers to this feature as AMD Platform Quality of Service(AMD QoS).
>  This feature is enabled by the CONFIG_X86_CPU_RESCTRL and the x86 /proc/cpuinfo
>  flag bits:
>  
> -=============================================	================================
> +===============================================	================================
>  RDT (Resource Director Technology) Allocation	"rdt_a"
>  CAT (Cache Allocation Technology)		"cat_l3", "cat_l2"
>  CDP (Code and Data Prioritization)		"cdp_l3", "cdp_l2"
>  CQM (Cache QoS Monitoring)			"cqm_llc", "cqm_occup_llc"
>  MBM (Memory Bandwidth Monitoring)		"cqm_mbm_total", "cqm_mbm_local"
>  MBA (Memory Bandwidth Allocation)		"mba"
> -=============================================	================================
> +SMBA (Slow Memory Bandwidth Allocation)         "smba"
> +BMEC (Bandwidth Monitoring Event Configuration) "bmec"
> +===============================================	================================
>  
>  To use the feature mount the file system::
>  
> @@ -161,6 +163,79 @@ with the following files:
>  "mon_features":
>  		Lists the monitoring events if
>  		monitoring is enabled for the resource.
> +                Example::
> +
> +                   # cat /sys/fs/resctrl/info/L3_MON/mon_features
> +                   llc_occupancy
> +                   mbm_total_bytes
> +                   mbm_local_bytes
> +
> +                If the system supports Bandwidth Monitoring Event
> +                Configuration (BMEC), then the bandwidth events will
> +                be configurable. The output will be::
> +
> +                   # cat /sys/fs/resctrl/info/L3_MON/mon_features
> +                   llc_occupancy
> +                   mbm_total_bytes
> +                   mbm_total_config
> +                   mbm_local_bytes
> +                   mbm_local_config
> +
> +"mbm_total_config", "mbm_local_config":
> +        These files contain the current event configuration for the events
> +        mbm_total_bytes and mbm_local_bytes, respectively, when the
> +        Bandwidth Monitoring Event Configuration (BMEC) feature is supported.
> +        The event configuration settings are domain specific and will affect
> +        all the CPUs in the domain.
> +
> +        Following are the types of events supported:
> +
> +        ====    ========================================================
> +        Bits    Description
> +        ====    ========================================================
> +        6       Dirty Victims from the QOS domain to all types of memory
> +        5       Reads to slow memory in the non-local NUMA domain
> +        4       Reads to slow memory in the local NUMA domain
> +        3       Non-temporal writes to non-local NUMA domain
> +        2       Non-temporal writes to local NUMA domain
> +        1       Reads to memory in the non-local NUMA domain
> +        0       Reads to memory in the local NUMA domain
> +        ====    ========================================================
> +
> +        By default, the mbm_total_bytes configuration is set to 0x7f to count
> +        all the event types and the mbm_local_bytes configuration is set to
> +        0x15 to count all the local memory events.
> +
> +        Examples:
> +
> +        * To view the current configuration::
> +          ::
> +
> +            # cat /sys/fs/resctrl/info/L3_MON/mbm_total_config
> +            0=0x7f;1=0x7f;2=0x7f;3=0x7f
> +
> +            # cat /sys/fs/resctrl/info/L3_MON/mbm_local_config
> +            0=0x15;1=0x15;3=0x15;4=0x15
> +
> +        * To change the mbm_total_bytes to count only reads on domain 0,
> +          the bits 0, 1, 4 and 5 needs to be set, which is 110011b in binary
> +          (in hexadecimal 0x33):
> +          ::
> +
> +            # echo  "0=0x33" > /sys/fs/resctrl/info/L3_MON/mbm_total_config
> +
> +            # cat /sys/fs/resctrl/info/L3_MON/mbm_total_config
> +            0=0x33;1=0x7f;2=0x7f;3=0x7f
> +
> +        * To change the mbm_local_bytes to count all the slow memory reads
> +          on domain 1, the bits 4 and 5 needs to be set, which is 110000b
> +          in binary (in hexadecimal 0x30):
> +          ::
> +
> +            # echo  "1=0x30" > /sys/fs/resctrl/info/L3_MON/mbm_local_config
> +
> +            # cat /sys/fs/resctrl/info/L3_MON/mbm_local_config
> +            0=0x15;1=0x30;3=0x15;4=0x15
>  
>  "max_threshold_occupancy":
>  		Read/write file provides the largest value (in
> @@ -464,6 +539,26 @@ Memory bandwidth domain is L3 cache.
>  
>  	MB:<cache_id0>=bw_MBps0;<cache_id1>=bw_MBps1;...
>  
> +Slow Memory bandwidth Allocation (SMBA)
> +---------------------------------------
> +AMD hardwares support Slow Memory bandwidth Allocation (SMBA) feature.
> +Currently, CXL.memory is the only supported "slow" memory device.
> +With the support of SMBA, the hardware enables bandwidth allocation
> +on the slow memory devices. If there are multiple such devices in the
> +system, the throttling logic groups all the slow sources together
> +and applies the limit on them as a whole.
> +
> +The presence of SMBA (with CXL.memory) is independent of slow memory
> +devices presence. If there is no such devices on the system, then
> +setting the configuring SMBA will have no impact on the performance
> +of the system.
> +
> +The bandwidth domain for slow memory is L3 cache. Its schemata file
> +is formatted as:
> +::
> +
> +	SMBA:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;...
> +
>  Reading/writing the schemata file
>  ---------------------------------
>  Reading the schemata file will show the state of all resources
> @@ -479,6 +574,46 @@ which you wish to change.  E.g.
>    L3DATA:0=fffff;1=fffff;2=3c0;3=fffff
>    L3CODE:0=fffff;1=fffff;2=fffff;3=fffff
>  
> +Reading/writing the schemata file (on AMD systems)
> +--------------------------------------------------
> +Reading the schemata file will show the current bandwidth limit on all
> +domains. The allocated resources are in multiples of one eighth GB/s.
> +When writing to the file, you need to specify what cache id you wish to
> +configure the bandwidth limit.
> +
> +For example, to allocate 2GB/s limit on the first cache id:
> +
> +::
> +
> +  # cat schemata
> +    MB:0=2048;1=2048;2=2048;3=2048
> +    L3:0=ffff;1=ffff;2=ffff;3=ffff
> +
> +  # echo "MB:1=16" > schemata
> +  # cat schemata
> +    MB:0=2048;1=  16;2=2048;3=2048
> +    L3:0=ffff;1=ffff;2=ffff;3=ffff
> +
> +Reading/writing the schemata file (on AMD systems) with SMBA feature
> +--------------------------------------------------------------------
> +Reading and writing the schemata file is the same as without SMBA in
> +above section.
> +
> +For example, to allocate 8GB/s limit on the first cache id:
> +
> +::
> +
> +  # cat schemata
> +    SMBA:0=2048;1=2048;2=2048;3=2048
> +      MB:0=2048;1=2048;2=2048;3=2048
> +      L3:0=ffff;1=ffff;2=ffff;3=ffff
> +
> +  # echo "SMBA:1=64" > schemata
> +  # cat schemata
> +    SMBA:0=2048;1=  64;2=2048;3=2048
> +      MB:0=2048;1=2048;2=2048;3=2048
> +      L3:0=ffff;1=ffff;2=ffff;3=ffff
> +
>  Cache Pseudo-Locking
>  ====================
>  CAT enables a user to specify the amount of cache space that an
> 
> 

Finally LGTM, thanks.

Reviewed-by: Bagas Sanjaya <bagasdotme@xxxxxxxxx>

-- 
An old man doll... just what I always wanted! - Clara

Attachment: signature.asc
Description: PGP signature