[PATCH v3 10/10] gpiolib: of: add a quirk for reset line polarity for Himax LCDs

[Dmitry Torokhov]

Existing DTS that use legacy (non-standard) property name for the reset
line "gpios-reset" also specify incorrect polarity (0 which maps to
"active high"). Add a quirk to force polarity to "active low" so that
once driver is converted to gpiod API that pays attention to line
polarity it will work properly.

Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
 drivers/gpio/gpiolib-of.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index c2a55ffb2b20..52616848a37c 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -152,11 +152,47 @@ static void of_gpio_quirk_polarity(const struct device_node *np,
 	}
 }
 
+/*
+ * This quirk does static polarity overrides in cases where existing
+ * DTS specified incorrect polarity.
+ */
+static void of_gpio_try_fixup_polarity(const struct device_node *np,
+				       const char *propname,
+				       enum of_gpio_flags *flags)
+{
+	static const struct {
+		const char *compatible;
+		const char *propname;
+		bool active_high;
+	} gpios[] = {
+#if !IS_ENABLED(CONFIG_LCD_HX8357)
+		/*
+		 * Himax LCD controllers used incorrectly named
+		 * "gpios-reset" property and also specified wrong
+		 * polarity.
+		 */
+		{ "himax,hx8357",	"gpios-reset",	false },
+		{ "himax,hx8369",	"gpios-reset",	false },
+#endif
+	};
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		if (of_device_is_compatible(np, gpios[i].compatible) &&
+		    !strcmp(propname, gpios[i].propname)) {
+			of_gpio_quirk_polarity(np, gpios[i].active_high, flags);
+			break;
+		}
+	}
+}
+
 static void of_gpio_flags_quirks(const struct device_node *np,
 				 const char *propname,
 				 enum of_gpio_flags *flags,
 				 int index)
 {
+	of_gpio_try_fixup_polarity(np, propname, flags);
+
 	/*
 	 * Some GPIO fixed regulator quirks.
 	 * Note that active low is the default.

-- 
b4 0.11.0-dev-5166b