Aw: Re: [RFC v1 02/12] dt-bindings: PCI: mediatek-gen3: add support for mt7986

[Frank Wunderlich]

Hi,

> Gesendet: Dienstag, 18. Oktober 2022 um 17:35 Uhr
> Von: "Krzysztof Kozlowski" <krzysztof.kozlowski@xxxxxxxxxx>
> On 17/10/2022 06:41, Frank Wunderlich wrote:
> > From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

> Maybe the clock is not required on mt7986?

yes, mt7986 does not have all clocks currently defined in binding for gen3-pcie (currently mt8xxx)

the mapping is as followed:

CLK_INFRA_IPCIER_CK: peri_26m
CLK_INFRA_IPCIEB_CK: top_133m
CLK_INFRA_IPCIE_CK: pcie working clock from SoC, in MT7986 it is equal to tl_26m + tl_96m + tl_32k in MT8192
CLK_INFRA_PCIE_SEL: clock mux to select source clock to CLK_INFRA_IPCIE_CK
CLK_INFRA_IPCIE_PIPE_CK : pcie working clock from PHY, pl_250m

as far as i see the driver only enables the clocks in bulk (no access to the clock-names), but binding needs the names

got it solved with help from mtk (see my comment on part 7) with filling missing clocks with a fixed-clock-node.
If this is the right way this binding-change is enough ;)

> Anyway, for the bindings:
>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

thx

regards Frank