[PATCH 6.0 027/862] iio: pressure: dps310: Refactor startup procedure

[Greg Kroah-Hartman]

From: Eddie James <eajames@xxxxxxxxxxxxx>

commit c2329717bdd3fa62f8a2f3d8d85ad0bee4556bd7 upstream.

Move the startup procedure into a function, and correct a missing
check on the return code for writing the PRS_CFG register.

Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@xxxxxxxxxxxxx
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/iio/pressure/dps310.c |  188 ++++++++++++++++++++++--------------------
 1 file changed, 99 insertions(+), 89 deletions(-)

--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -159,6 +159,102 @@ static int dps310_get_coefs(struct dps31
 	return 0;
 }
 
+/*
+ * Some versions of the chip will read temperatures in the ~60C range when
+ * it's actually ~20C. This is the manufacturer recommended workaround
+ * to correct the issue. The registers used below are undocumented.
+ */
+static int dps310_temp_workaround(struct dps310_data *data)
+{
+	int rc;
+	int reg;
+
+	rc = regmap_read(data->regmap, 0x32, &reg);
+	if (rc)
+		return rc;
+
+	/*
+	 * If bit 1 is set then the device is okay, and the workaround does not
+	 * need to be applied
+	 */
+	if (reg & BIT(1))
+		return 0;
+
+	rc = regmap_write(data->regmap, 0x0e, 0xA5);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x0f, 0x96);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x62, 0x02);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(data->regmap, 0x0e, 0x00);
+	if (rc)
+		return rc;
+
+	return regmap_write(data->regmap, 0x0f, 0x00);
+}
+
+static int dps310_startup(struct dps310_data *data)
+{
+	int rc;
+	int ready;
+
+	/*
+	 * Set up pressure sensor in single sample, one measurement per second
+	 * mode
+	 */
+	rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0);
+	if (rc)
+		return rc;
+
+	/*
+	 * Set up external (MEMS) temperature sensor in single sample, one
+	 * measurement per second mode
+	 */
+	rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT);
+	if (rc)
+		return rc;
+
+	/* Temp and pressure shifts are disabled when PRC <= 8 */
+	rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
+			       DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0);
+	if (rc)
+		return rc;
+
+	/* MEAS_CFG doesn't update correctly unless first written with 0 */
+	rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+			       DPS310_MEAS_CTRL_BITS, 0);
+	if (rc)
+		return rc;
+
+	/* Turn on temperature and pressure measurement in the background */
+	rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+			       DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN |
+			       DPS310_TEMP_EN | DPS310_BACKGROUND);
+	if (rc)
+		return rc;
+
+	/*
+	 * Calibration coefficients required for reporting temperature.
+	 * They are available 40ms after the device has started
+	 */
+	rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
+				      ready & DPS310_COEF_RDY, 10000, 40000);
+	if (rc)
+		return rc;
+
+	rc = dps310_get_coefs(data);
+	if (rc)
+		return rc;
+
+	return dps310_temp_workaround(data);
+}
+
 static int dps310_get_pres_precision(struct dps310_data *data)
 {
 	int rc;
@@ -677,52 +773,12 @@ static const struct iio_info dps310_info
 	.write_raw = dps310_write_raw,
 };
 
-/*
- * Some verions of chip will read temperatures in the ~60C range when
- * its actually ~20C. This is the manufacturer recommended workaround
- * to correct the issue. The registers used below are undocumented.
- */
-static int dps310_temp_workaround(struct dps310_data *data)
-{
-	int rc;
-	int reg;
-
-	rc = regmap_read(data->regmap, 0x32, &reg);
-	if (rc < 0)
-		return rc;
-
-	/*
-	 * If bit 1 is set then the device is okay, and the workaround does not
-	 * need to be applied
-	 */
-	if (reg & BIT(1))
-		return 0;
-
-	rc = regmap_write(data->regmap, 0x0e, 0xA5);
-	if (rc < 0)
-		return rc;
-
-	rc = regmap_write(data->regmap, 0x0f, 0x96);
-	if (rc < 0)
-		return rc;
-
-	rc = regmap_write(data->regmap, 0x62, 0x02);
-	if (rc < 0)
-		return rc;
-
-	rc = regmap_write(data->regmap, 0x0e, 0x00);
-	if (rc < 0)
-		return rc;
-
-	return regmap_write(data->regmap, 0x0f, 0x00);
-}
-
 static int dps310_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct dps310_data *data;
 	struct iio_dev *iio;
-	int rc, ready;
+	int rc;
 
 	iio = devm_iio_device_alloc(&client->dev,  sizeof(*data));
 	if (!iio)
@@ -747,54 +803,8 @@ static int dps310_probe(struct i2c_clien
 	if (rc)
 		return rc;
 
-	/*
-	 * Set up pressure sensor in single sample, one measurement per second
-	 * mode
-	 */
-	rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0);
-
-	/*
-	 * Set up external (MEMS) temperature sensor in single sample, one
-	 * measurement per second mode
-	 */
-	rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT);
-	if (rc < 0)
-		return rc;
-
-	/* Temp and pressure shifts are disabled when PRC <= 8 */
-	rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
-			       DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0);
-	if (rc < 0)
-		return rc;
-
-	/* MEAS_CFG doesn't update correctly unless first written with 0 */
-	rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
-			       DPS310_MEAS_CTRL_BITS, 0);
-	if (rc < 0)
-		return rc;
-
-	/* Turn on temperature and pressure measurement in the background */
-	rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
-			       DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN |
-			       DPS310_TEMP_EN | DPS310_BACKGROUND);
-	if (rc < 0)
-		return rc;
-
-	/*
-	 * Calibration coefficients required for reporting temperature.
-	 * They are available 40ms after the device has started
-	 */
-	rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
-				      ready & DPS310_COEF_RDY, 10000, 40000);
-	if (rc < 0)
-		return rc;
-
-	rc = dps310_get_coefs(data);
-	if (rc < 0)
-		return rc;
-
-	rc = dps310_temp_workaround(data);
-	if (rc < 0)
+	rc = dps310_startup(data);
+	if (rc)
 		return rc;
 
 	rc = devm_iio_device_register(&client->dev, iio);