Re: [PATCH] arm64: dts: qcom: qrb5165-rb5: Disable cpuidle states

[Ulf Hansson]

On Tue, 18 Oct 2022 at 16:53, Amit Pundir <amit.pundir@xxxxxxxxxx> wrote:
>
> Disable cpuidle states for RB5. These cpuidle states
> made the device highly unstable and it runs into the
> following crash frequently:
>
> [    T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> [    T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> [    T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
>
> Fixes: 32bc936d7321 ("arm64: dts: qcom: sm8250: Add cpuidle states")
> Signed-off-by: Amit Pundir <amit.pundir@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index cc003535a3c5..f936c41bfbea 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -251,6 +251,14 @@ qca639x: qca639x {
>
>  };
>
> +&LITTLE_CPU_SLEEP_0 {
> +       status = "disabled";
> +};
> +
> +&BIG_CPU_SLEEP_0 {
> +       status = "disabled";
> +};
> +
>  &adsp {
>         status = "okay";
>         firmware-name = "qcom/sm8250/adsp.mbn";
> --
> 2.25.1

Disabling the CPU idlestates, will revert us back to using only the WFI state.

An option that probably works too is to just drop the idlestate for
the CPU cluster. Would you mind trying the below and see if that works
too?

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index c32227ea40f9..c707a49e8001 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -700,7 +700,6 @@ CPU_PD7: cpu7 {

                CLUSTER_PD: cpu-cluster0 {
                        #power-domain-cells = <0>;
-                       domain-idle-states = <&CLUSTER_SLEEP_0>;
                };
        };

Kind regards
Uffe