[PATCH 5/6] arm: dts: spear600: Add ssp controller nodes

[Köry Maincent]

From: Kory Maincent <kory.maincent@xxxxxxxxxxx>

The SPEAr600 has three Synchronous serial port to enables synchronous
serial communication with slave or master peripherals (SPI). Lets add these
nodes to be able to use them.

Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>
---
 arch/arm/boot/dts/spear600.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index 9d5a04a46b14..6b67c0ceaed9 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -207,6 +207,36 @@ adc: adc@d820b000 {
 				interrupts = <6>;
 				status = "disabled";
 			};
+
+			ssp1: spi@d0100000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0100000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <26>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d0180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d8180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd8180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic1>;
+				interrupts = <5>;
+				status = "disabled";
+			};
 		};
 	};
 };
-- 
2.25.1