[PATCH 1/2] dt-bindings: PCI: xilinx-pcie: Convert to YAML schemas of Xilinx AXI PCIe Root Port Bridge

[Thippeswamy Havalige]

Convert to YAML dtschemas of Xilinx AXI PCIe Root Port Bridge
dt binding.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
---
 .../devicetree/bindings/pci/xilinx-pcie.txt   | 88 -------------------
 .../devicetree/bindings/pci/xilinx-pcie.yaml  | 81 +++++++++++++++++
 2 files changed, 81 insertions(+), 88 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
 create mode 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
deleted file mode 100644
index fd57a81180a4..000000000000
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Xilinx AXI PCIe Root Port Bridge DT description
-
-Required properties:
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
-- reg: Should contain AXI PCIe registers location and length
-- device_type: must be "pci"
-- interrupts: Should contain AXI PCIe interrupt
-- interrupt-map-mask,
-  interrupt-map: standard PCI properties to define the mapping of the
-	PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
-	supported by hardware)
-	Please refer to the standard PCI bus binding document for a more
-	detailed explanation
-
-Optional properties for Zynq/Microblaze:
-- bus-range: PCI bus numbers covered
-
-Interrupt controller child node
-+++++++++++++++++++++++++++++++
-Required properties:
-- interrupt-controller: identifies the node as an interrupt controller
-- #address-cells: specifies the number of cells needed to encode an
-	address. The value must be 0.
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-
-NOTE:
-The core provides a single interrupt for both INTx/MSI messages. So,
-created a interrupt controller node to support 'interrupt-map' DT
-functionality.  The driver will create an IRQ domain for this map, decode
-the four INTx interrupts in ISR and route them to this domain.
-
-
-Example:
-++++++++
-Zynq:
-	pci_express: axi-pcie@50000000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = < 0x50000000 0x1000000 >;
-		device_type = "pci";
-		interrupts = < 0 52 4 >;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
-		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
-
-		pcie_intc: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-
-Microblaze:
-	pci_express: axi-pcie@10000000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = <0x10000000 0x4000000>;
-		device_type = "pci";
-		interrupt-parent = <&microblaze_0_intc>;
-		interrupts = <1 2>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
-		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
-
-		pcie_intc: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.yaml b/Documentation/devicetree/bindings/pci/xilinx-pcie.yaml
new file mode 100644
index 000000000000..6b372ac1763e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xilinx-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI PCIe Root Port Bridge DT description
+
+maintainers:
+  - Thippeswamy Havalige <thippesw@xxxxxxxxxx>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: xlnx,axi-pcie-host-1.00.a
+
+  reg:
+    items:
+      - description: should contain AXI PCIe registers location and length
+
+  interrupts:
+    items:
+      - description: should contain AXI PCIe interrupt
+
+  ranges:
+    items:
+      - description: |
+          ranges for the PCI memory regions (I/O space region is not
+          supported by hardware)
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    properties:
+      "interrupt-controller": true
+      "#address-cells":
+        const: 0
+      "#interrupt-cells":
+        const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ranges
+  - device_type
+  - interrupt-map
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    Zynq:
+        pci_express: pcie@50000000 {
+               #address-cells = <3>;
+               #size-cells = <2>;
+               #interrupt-cells = <1>;
+               compatible = "xlnx,axi-pcie-host-1.00.a";
+               reg = < 0x50000000 0x1000000 >;
+               device_type = "pci";
+               interrupts = < 0 52 4 >;
+               interrupt-map-mask = <0 0 0 7>;
+               interrupt-map = <0 0 0 1 &pcie_intc 1>,
+                               <0 0 0 2 &pcie_intc 2>,
+                               <0 0 0 3 &pcie_intc 3>,
+                               <0 0 0 4 &pcie_intc 4>;
+                ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
+                pcie_intc: interrupt-controller {
+                         interrupt-controller;
+                         #address-cells = <0>;
+                         #interrupt-cells = <1>;
+                };
+    };
-- 
2.25.1