Re: [PATCH 2/2] dt-bindings: PCI: xilinx-nwl: Convert to YAML schemas of Xilinx NWL PCIe Root Port Bridge

[Krzysztof Kozlowski]

On 19/10/2022 10:46, Thippeswamy Havalige wrote:
> Convert to YAML schemas for Xilinx NWL PCIe Root Port Bridge
> dt binding.
> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>

(...)

> diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.yaml
> new file mode 100644
> index 000000000000..97a33e8cc171
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/xilinx-nwl-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx NWL PCIe Root Port Bridge DT description

Same comments apply.

> +
> +maintainers:
> +  - Thippeswamy Havalige <thippesw@xxxxxxxxxx>

Use current email address.

> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +properties:
> +  compatible:
> +    const: xlnx,nwl-pcie-2.11
> +
> +  reg:
> +    items:
> +      - description: PCIe bridge registers location.
> +      - description: PCIe Controller registers location.
> +      - description: PCIe Configuration space region.
> +
> +  reg-names:
> +    items:
> +      - const: breg
> +      - const: pcireg
> +      - const: cfg
> +
> +  interrupts:
> +    items:
> +      - description: msi0 interrupt asserted when an MSI is received
> +      - description: msi1 interrupt asserted when an MSI is received
> +      - description: interrupt asserted when a legacy interrupt is received
> +      - description: unused interrupt(dummy)
> +      - description: interrupt asserted when miscellaneous interrupt is received
> +
> +  interrupt-names:
> +    minItems: 5

maxItems instead

> +
> +  interrupt-map-mask:
> +    items:
> +      - const: 0
> +      - const: 0
> +      - const: 0
> +      - const: 7
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  msi-controller:
> +    description: Identifies the node as an MSI controller.

If it is a MSI controller, shouldn't you reference
/schemas/interrupt-controller/msi-controller.yaml ?

> +
> +  msi-parent:
> +    description: MSI controller the device is capable of using.

msi-parent: true

> +
> +  interrupt-map:
> +    maxItems: 4
> +
> +  legacy-interrupt-controller:
> +    description: Interrupt controller node for handling legacy PCI interrupts.
> +    type: object

Same comments apply.

> +    properties:
> +      "#address-cells":
> +        const: 0
> +      "#interrupt-cells":
> +        const: 1
> +      "interrupt-controller": true
> +

what happened to clocks? You did not describe any changes in commit msg.

> +required:

compatible

> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +  - "#interrupt-cells"
> +  - interrupt-map
> +  - msi-controller
> +  - msi-parent
> +  - interrupt-map-mask
> +  - legacy-interrupt-controller

Drop properties required by referenced schema.

> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +
> +    soc {
> +          #address-cells = <2>;
> +          #size-cells = <2>;
> +          nwl_pcie: pcie@fd0e0000 {
> +                     #address-cells = <3>;

Mess up indentation

Use 4 spaces for example indentation.

> +                     #size-cells = <2>;
> +                     compatible = "xlnx,nwl-pcie-2.11";

Same comments apply

> +                     #interrupt-cells = <1>;
> +                     msi-controller;
> +                     device_type = "pci";
> +                     interrupt-parent = <&gic>;
> +                     interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
> +                     interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
> +                     interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +                     interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
> +                                     <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
> +                                     <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
> +                                     <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
> +
> +                     msi-parent = <&nwl_pcie>;
> +                     reg = <0x0 0xfd0e0000 0x0 0x1000>,
> +                           <0x0 0xfd480000 0x0 0x1000>,
> +                           <0x80 0x00000000 0x0 0x1000000>;

This is a second property in the list (followed by reg-names, ranges)

> +                     reg-names = "breg", "pcireg", "cfg";
> +                     ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000
> +                               0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>;
> +
> +                     pcie_intc: legacy-interrupt-controller {
> +                     interrupt-controller;

That's even worse...

> +                     #address-cells = <0>;
> +                     #interrupt-cells = <1>;
> +                     };
> +
> +           };
> +        };

Best regards,
Krzysztof