[PATCH v2 3/7] mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI

[Brian Norris]

 [[ NOTE: this is completely untested by the author, but included solely
    because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix
    SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
    drivers using CQHCI might benefit from a similar change, if they
    also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
    bug on at least MSM, Arasan, and Intel hardware. ]]

SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.

It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.

Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---

Changes in v2:
 - Rely on cqhci_deactivate() to handle NULL cqe_private, instead of
   moving around CQE capability flags

 drivers/mmc/host/sdhci-brcmstb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index aff36a933ebe..d479ca39c987 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -55,6 +55,9 @@ static void brcmstb_reset(struct sdhci_host *host, u8 mask)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
 
+	if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL))
+		cqhci_deactivate(host->mmc);
+
 	sdhci_reset(host, mask);
 
 	/* Reset will clear this, so re-enable it */
-- 
2.38.0.413.g74048e4d9e-goog