[PATCH v2 4/7] mms: sdhci-esdhc-imx: Fix SDHCI_RESET_ALL for CQHCI

[Brian Norris]

 [[ NOTE: this is completely untested by the author, but included solely
    because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix
    SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
    drivers using CQHCI might benefit from a similar change, if they
    also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
    bug on at least MSM, Arasan, and Intel hardware. ]]

SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.

It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.

Fixes: bb6e358169bf ("mmc: sdhci-esdhc-imx: add CMDQ support")
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---

Changes in v2:
 - Drop unnecessary ESDHC_FLAG_CQHCI check

 drivers/mmc/host/sdhci-esdhc-imx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 55981b0f0b10..c07df7b71b22 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1288,6 +1288,9 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
 
 static void esdhc_reset(struct sdhci_host *host, u8 mask)
 {
+	if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL))
+		cqhci_deactivate(host->mmc);
+
 	sdhci_reset(host, mask);
 
 	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
-- 
2.38.0.413.g74048e4d9e-goog